86f26a77cb
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)
- Add more 32 GT/s link speed decoding and improve the implementation
(Yicong Yang)
Resource management:
- Add support for sizing programmable host bridge apertures and fix a
related alpha Nautilus regression (Ivan Kokshaysky)
Interrupts:
- Add boot interrupt quirk mechanism for Xeon chipsets and document
boot interrupts (Sean V Kelley)
PCIe native device hotplug:
- When possible, disable in-band presence detect and use PDS
(Alexandru Gagniuc)
- Add DMI table for devices that don't use in-band presence detection
but don't advertise that correctly (Stuart Hayes)
- Fix hang when powering slots up/down via sysfs (Lukas Wunner)
- Fix an MSI interrupt race (Stuart Hayes)
Virtualization:
- Add ACS quirks for Zhaoxin devices (Raymond Pang)
Error handling:
- Add Error Disconnect Recover (EDR) support so firmware can report
devices disconnected via DPC and we can try to recover (Kuppuswamy
Sathyanarayanan)
Peer-to-peer DMA:
- Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
Maier)
ASPM:
- Reduce severity of common clock config message (Chris Packham)
- Clear the correct bits when enabling L1 substates, so we don't go
to the wrong state (Yicong Yang)
Endpoint framework:
- Replace EPF linkup ops with notifier call chain and improve locking
(Kishon Vijay Abraham I)
- Fix concurrent memory allocation in OB address region (Kishon Vijay
Abraham I)
- Move PF function number assignment to EPC core to support multiple
function creation methods (Kishon Vijay Abraham I)
- Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)
- Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
Offset (Kishon Vijay Abraham I)
- Add support for testing DMA transfers (Kishon Vijay Abraham I)
- Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)
- Add support for tests to clear IRQ (Kishon Vijay Abraham I)
- Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)
Amlogic Meson PCIe controller driver:
- Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
Pommarel)
- Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
Pommarel)
Cadence PCIe controller driver:
- Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Add two VMD Device IDs that require bus restriction mode (Sushma
Kalakota)
Mobiveil PCIe controller driver:
- Refactor and modularize mobiveil driver (Hou Zhiqiang)
- Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)
Microsoft Hyper-V host bridge driver:
- Add support for Hyper-V PCI protocol version 1.3 and
PCI_BUS_RELATIONS2 (Long Li)
- Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
Feng)
- Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Use pci_parse_request_of_pci_ranges() (Rob Herring)
- Add support for endpoint mode and related DT updates (Vidya Sagar)
- Reduce -EPROBE_DEFER error message log level (Thierry Reding)
Qualcomm PCIe controller driver:
- Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)
Synopsys DesignWare PCIe controller driver:
- Refactor core initialization code for endpoint mode (Vidya Sagar)
- Fix endpoint MSI-X to use correct table address (Kishon Vijay
Abraham I)
TI DRA7xx PCIe controller driver:
- Fix MSI IRQ handling (Vignesh Raghavendra)
TI Keystone PCIe controller driver:
- Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)
Miscellaneous:
- Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
Feng)
- Use ioremap(), not phys_to_virt(), for platform ROM to fix video
ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"
* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
PCI: tegra: Print -EPROBE_DEFER error message at debug level
misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
tools: PCI: Add 'e' to clear IRQ
misc: pci_endpoint_test: Add ioctl to clear IRQ
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
misc: pci_endpoint_test: Add support to get DMA option from userspace
tools: PCI: Add 'd' command line option to support DMA
misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
PCI: endpoint: functions/pci-epf-test: Print throughput information
PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
PCI: pciehp: Fix MSI interrupt race
PCI: pciehp: Fix indefinite wait on sysfs requests
PCI: endpoint: Fix clearing start entry in configfs
PCI: tegra: Add support for PCIe endpoint mode in Tegra194
PCI: sysfs: Revert "rescan" file renames
...
154 lines
4.3 KiB
Plaintext
154 lines
4.3 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# PCI Express Port Bus Configuration
|
|
#
|
|
config PCIEPORTBUS
|
|
bool "PCI Express Port Bus support"
|
|
help
|
|
This enables PCI Express Port Bus support. Users can then enable
|
|
support for Native Hot-Plug, Advanced Error Reporting, Power
|
|
Management Events, and Downstream Port Containment.
|
|
|
|
#
|
|
# Include service Kconfig here
|
|
#
|
|
config HOTPLUG_PCI_PCIE
|
|
bool "PCI Express Hotplug driver"
|
|
depends on HOTPLUG_PCI && PCIEPORTBUS
|
|
help
|
|
Say Y here if you have a motherboard that supports PCI Express Native
|
|
Hotplug
|
|
|
|
When in doubt, say N.
|
|
|
|
config PCIEAER
|
|
bool "PCI Express Advanced Error Reporting support"
|
|
depends on PCIEPORTBUS
|
|
select RAS
|
|
default y
|
|
help
|
|
This enables PCI Express Root Port Advanced Error Reporting
|
|
(AER) driver support. Error reporting messages sent to Root
|
|
Port will be handled by PCI Express AER driver.
|
|
|
|
config PCIEAER_INJECT
|
|
tristate "PCI Express error injection support"
|
|
depends on PCIEAER
|
|
select GENERIC_IRQ_INJECTION
|
|
help
|
|
This enables PCI Express Root Port Advanced Error Reporting
|
|
(AER) software error injector.
|
|
|
|
Debugging AER code is quite difficult because it is hard
|
|
to trigger various real hardware errors. Software-based
|
|
error injection can fake almost all kinds of errors with the
|
|
help of a user space helper tool aer-inject, which can be
|
|
gotten from:
|
|
http://www.kernel.org/pub/linux/utils/pci/aer-inject/
|
|
|
|
#
|
|
# PCI Express ECRC
|
|
#
|
|
config PCIE_ECRC
|
|
bool "PCI Express ECRC settings control"
|
|
depends on PCIEAER
|
|
help
|
|
Used to override firmware/bios settings for PCI Express ECRC
|
|
(transaction layer end-to-end CRC checking).
|
|
|
|
When in doubt, say N.
|
|
|
|
#
|
|
# PCI Express ASPM
|
|
#
|
|
config PCIEASPM
|
|
bool "PCI Express ASPM control" if EXPERT
|
|
default y
|
|
help
|
|
This enables OS control over PCI Express ASPM (Active State
|
|
Power Management) and Clock Power Management. ASPM supports
|
|
state L0/L0s/L1.
|
|
|
|
ASPM is initially set up by the firmware. With this option enabled,
|
|
Linux can modify this state in order to disable ASPM on known-bad
|
|
hardware or configurations and enable it when known-safe.
|
|
|
|
ASPM can be disabled or enabled at runtime via
|
|
/sys/module/pcie_aspm/parameters/policy
|
|
|
|
When in doubt, say Y.
|
|
|
|
choice
|
|
prompt "Default ASPM policy"
|
|
default PCIEASPM_DEFAULT
|
|
depends on PCIEASPM
|
|
|
|
config PCIEASPM_DEFAULT
|
|
bool "BIOS default"
|
|
depends on PCIEASPM
|
|
help
|
|
Use the BIOS defaults for PCI Express ASPM.
|
|
|
|
config PCIEASPM_POWERSAVE
|
|
bool "Powersave"
|
|
depends on PCIEASPM
|
|
help
|
|
Enable PCI Express ASPM L0s and L1 where possible, even if the
|
|
BIOS did not.
|
|
|
|
config PCIEASPM_POWER_SUPERSAVE
|
|
bool "Power Supersave"
|
|
depends on PCIEASPM
|
|
help
|
|
Same as PCIEASPM_POWERSAVE, except it also enables L1 substates where
|
|
possible. This would result in higher power savings while staying in L1
|
|
where the components support it.
|
|
|
|
config PCIEASPM_PERFORMANCE
|
|
bool "Performance"
|
|
depends on PCIEASPM
|
|
help
|
|
Disable PCI Express ASPM L0s and L1, even if the BIOS enabled them.
|
|
endchoice
|
|
|
|
config PCIE_PME
|
|
def_bool y
|
|
depends on PCIEPORTBUS && PM
|
|
|
|
config PCIE_DPC
|
|
bool "PCI Express Downstream Port Containment support"
|
|
depends on PCIEPORTBUS && PCIEAER
|
|
help
|
|
This enables PCI Express Downstream Port Containment (DPC)
|
|
driver support. DPC events from Root and Downstream ports
|
|
will be handled by the DPC driver. If your system doesn't
|
|
have this capability or you do not want to use this feature,
|
|
it is safe to answer N.
|
|
|
|
config PCIE_PTM
|
|
bool "PCI Express Precision Time Measurement support"
|
|
help
|
|
This enables PCI Express Precision Time Measurement (PTM)
|
|
support.
|
|
|
|
This is only useful if you have devices that support PTM, but it
|
|
is safe to enable even if you don't.
|
|
|
|
config PCIE_BW
|
|
bool "PCI Express Bandwidth Change Notification"
|
|
depends on PCIEPORTBUS
|
|
help
|
|
This enables PCI Express Bandwidth Change Notification. If
|
|
you know link width or rate changes occur only to correct
|
|
unreliable links, you may answer Y.
|
|
|
|
config PCIE_EDR
|
|
bool "PCI Express Error Disconnect Recover support"
|
|
depends on PCIE_DPC && ACPI
|
|
help
|
|
This option adds Error Disconnect Recover support as specified
|
|
in the Downstream Port Containment Related Enhancements ECN to
|
|
the PCI Firmware Specification r3.2. Enable this if you want to
|
|
support hybrid DPC model which uses both firmware and OS to
|
|
implement DPC.
|