forked from Minki/linux
301e9d64e0
after looking it up, all rants about the 80 columns restriction seem to be in vain. After changing the card's name it are now "only" seven new lines in the tiny DVB-T/DVB-S switch function. saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:08.0, rev: 209, irq: 18, latency: 32, mmio: 0xfdef7000 saa7133[0]: subsystem: 1043:4878, board: Asus Tiger 3in1 [card=147,autodetected] saa7133[0]: board init: gpio is 200000 tuner' 2-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: 43 10 78 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d7 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 28 00 c2 96 16 03 02 c0 1c ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x10 [???] saa7133[0]: i2c scan: found device @ 0x16 [???] saa7133[0]: i2c scan: found device @ 0x1c [???] saa7133[0]: i2c scan: found device @ 0x96 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] tda829x 2-004b: setting tuner address to 61 tda829x 2-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10086 DVB-S)... The board init gpio is 0x0, 0x200000 is from previously unloading with antenna_switch = 1. It needs firmware for the tda10046 and analog sound needs saa7134-alsa. I have support for one more board and need to fix the first revision of the Asus Tiger DVB-T hybrid. DVB-T currently hangs on the male radio antenna input, also some small other stuff. Please report any issues with this patch, the next are depending on this one. saa7134: add support for the triple Asus Tiger 3in1 Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> |
||
---|---|---|
.. | ||
bttv | ||
cx88 | ||
cx2341x | ||
API.html | ||
cafe_ccic | ||
CARDLIST.au0828 | ||
CARDLIST.bttv | ||
CARDLIST.cx88 | ||
CARDLIST.cx23885 | ||
CARDLIST.em28xx | ||
CARDLIST.ivtv | ||
CARDLIST.saa7134 | ||
CARDLIST.tuner | ||
CARDLIST.usbvision | ||
cpia2_overview.txt | ||
CQcam.txt | ||
cx18.txt | ||
et61x251.txt | ||
extract_xc3028.pl | ||
gspca.txt | ||
hauppauge-wintv-cx88-ir.txt | ||
ibmcam.txt | ||
lifeview.txt | ||
Makefile | ||
meye.txt | ||
not-in-cx2388x-datasheet.txt | ||
ov511.txt | ||
radiotrack.txt | ||
README.cpia | ||
README.cpia2 | ||
README.cx88 | ||
README.ir | ||
README.ivtv | ||
README.pvrusb2 | ||
README.saa7134 | ||
se401.txt | ||
sn9c102.txt | ||
soc-camera.txt | ||
stv680.txt | ||
v4lgrab.c | ||
w9966.txt | ||
w9968cf.txt | ||
zc0301.txt | ||
Zoran | ||
zr364xx.txt |
What is it? =========== This is a v4l2/oss device driver for saa7130/33/34/35 based capture / TV boards. See http://www.semiconductors.philips.com/pip/saa7134hl for a description. Status ====== Almost everything is working. video, sound, tuner, radio, mpeg ts, ... As with bttv, card-specific tweaks are needed. Check CARDLIST for a list of known TV cards and saa7134-cards.c for the drivers card configuration info. Build ===== Pick up videodev + v4l2 patches from http://bytesex.org/patches/. Configure, build, install + boot the new kernel. You'll need at least these config options: CONFIG_I2C=m CONFIG_VIDEO_DEV=m Type "make" to build the driver now. "make install" installs the driver. "modprobe saa7134" should load it. Depending on the card you might have to pass card=<nr> as insmod option, check CARDLIST for valid choices. Changes / Fixes =============== Please mail me unified diffs ("diff -u") with your changes, and don't forget to tell me what it changes / which problem it fixes / whatever it is good for ... Known Problems ============== * The tuner for the flyvideos isn't detected automatically and the default might not work for you depending on which version you have. There is a tuner= insmod option to override the driver's default. Card Variations: ================ Cards can use either of these two crystals (xtal): - 32.11 MHz -> .audio_clock=0x187de7 - 24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600) Some details about 30/34/35: - saa7130 - low-price chip, doesn't have mute, that is why all those cards should have .mute field defined in their tuner structure. - saa7134 - usual chip - saa7133/35 - saa7135 is probably a marketing decision, since all those chips identifies itself as 33 on pci. Credits ======= andrew.stevens@philips.com + werner.leeb@philips.com for providing saa7134 hardware specs and sample board. Have fun, Gerd -- Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]