forked from Minki/linux
434242cd60
Add the rk3036 SoCs to match driver for document since the emac driver has supported the rk3036 SoCs. This patch adds the rk3036/rk3066/rk3188 SoCS to compatible for rockchip emac ducument. Also, that will suit for other SoCs in the future. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
53 lines
1.6 KiB
Plaintext
53 lines
1.6 KiB
Plaintext
* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs
|
|
|
|
Required properties:
|
|
- compatible: should be "rockchip,<name>-emac"
|
|
"rockchip,rk3036-emac": found on RK3036 SoCs
|
|
"rockchip,rk3066-emac": found on RK3066 SoCs
|
|
"rockchip,rk3188-emac": found on RK3188 SoCs
|
|
- reg: Address and length of the register set for the device
|
|
- interrupts: Should contain the EMAC interrupts
|
|
- rockchip,grf: phandle to the syscon grf used to control speed and mode
|
|
for emac.
|
|
- phy: see ethernet.txt file in the same directory.
|
|
- phy-mode: see ethernet.txt file in the same directory.
|
|
|
|
Optional properties:
|
|
- phy-supply: phandle to a regulator if the PHY needs one
|
|
|
|
Clock handling:
|
|
- clocks: Must contain an entry for each entry in clock-names.
|
|
- clock-names: Shall be "hclk" for the host clock needed to calculate and set
|
|
polling period of EMAC and "macref" for the reference clock needed to transfer
|
|
data to and from the phy.
|
|
|
|
Child nodes of the driver are the individual PHY devices connected to the
|
|
MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
|
|
|
|
Examples:
|
|
|
|
ethernet@10204000 {
|
|
compatible = "rockchip,rk3188-emac";
|
|
reg = <0xc0fc2000 0x3c>;
|
|
interrupts = <6>;
|
|
mac-address = [ 00 11 22 33 44 55 ];
|
|
|
|
clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
|
|
clock-names = "hclk", "macref";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
|
|
|
|
rockchip,grf = <&grf>;
|
|
|
|
phy = <&phy0>;
|
|
phy-mode = "rmii";
|
|
phy-supply = <&vcc_rmii>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy0: ethernet-phy@0 {
|
|
reg = <1>;
|
|
};
|
|
};
|