forked from Minki/linux
d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
144 lines
3.3 KiB
C
144 lines
3.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* ltc2485.c - Driver for Linear Technology LTC2485 ADC
|
|
*
|
|
* Copyright (C) 2016 Alison Schofield <amsfield22@gmail.com>
|
|
*
|
|
* Datasheet: http://cds.linear.com/docs/en/datasheet/2485fd.pdf
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
/* Power-on configuration: rejects both 50/60Hz, operates at 1x speed */
|
|
#define LTC2485_CONFIG_DEFAULT 0
|
|
|
|
struct ltc2485_data {
|
|
struct i2c_client *client;
|
|
ktime_t time_prev; /* last conversion */
|
|
};
|
|
|
|
static void ltc2485_wait_conv(struct ltc2485_data *data)
|
|
{
|
|
const unsigned int conv_time = 147; /* conversion time ms */
|
|
unsigned int time_elapsed;
|
|
|
|
/* delay if conversion time not passed since last read or write */
|
|
time_elapsed = ktime_ms_delta(ktime_get(), data->time_prev);
|
|
|
|
if (time_elapsed < conv_time)
|
|
msleep(conv_time - time_elapsed);
|
|
}
|
|
|
|
static int ltc2485_read(struct ltc2485_data *data, int *val)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
__be32 buf = 0;
|
|
int ret;
|
|
|
|
ltc2485_wait_conv(data);
|
|
|
|
ret = i2c_master_recv(client, (char *)&buf, 4);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "i2c_master_recv failed\n");
|
|
return ret;
|
|
}
|
|
data->time_prev = ktime_get();
|
|
*val = sign_extend32(be32_to_cpu(buf) >> 6, 24);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ltc2485_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct ltc2485_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
if (mask == IIO_CHAN_INFO_RAW) {
|
|
ret = ltc2485_read(data, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
} else if (mask == IIO_CHAN_INFO_SCALE) {
|
|
*val = 5000; /* on board vref millivolts */
|
|
*val2 = 25; /* 25 (24 + sign) data bits */
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_chan_spec ltc2485_channel[] = {
|
|
{
|
|
.type = IIO_VOLTAGE,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE)
|
|
},
|
|
};
|
|
|
|
static const struct iio_info ltc2485_info = {
|
|
.read_raw = ltc2485_read_raw,
|
|
};
|
|
|
|
static int ltc2485_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct ltc2485_data *data;
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
|
|
I2C_FUNC_SMBUS_WRITE_BYTE))
|
|
return -EOPNOTSUPP;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
|
|
indio_dev->name = id->name;
|
|
indio_dev->info = <c2485_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = ltc2485_channel;
|
|
indio_dev->num_channels = ARRAY_SIZE(ltc2485_channel);
|
|
|
|
ret = i2c_smbus_write_byte(data->client, LTC2485_CONFIG_DEFAULT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->time_prev = ktime_get();
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id ltc2485_id[] = {
|
|
{ "ltc2485", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ltc2485_id);
|
|
|
|
static struct i2c_driver ltc2485_driver = {
|
|
.driver = {
|
|
.name = "ltc2485",
|
|
},
|
|
.probe = ltc2485_probe,
|
|
.id_table = ltc2485_id,
|
|
};
|
|
module_i2c_driver(ltc2485_driver);
|
|
|
|
MODULE_AUTHOR("Alison Schofield <amsfield22@gmail.com>");
|
|
MODULE_DESCRIPTION("Linear Technology LTC2485 ADC driver");
|
|
MODULE_LICENSE("GPL v2");
|