forked from Minki/linux
229aebb873
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
1924 lines
50 KiB
C
1924 lines
50 KiB
C
/*
|
|
|
|
drivers/net/pci-skeleton.c
|
|
|
|
Maintained by Jeff Garzik <jgarzik@pobox.com>
|
|
|
|
Original code came from 8139too.c, which in turns was based
|
|
originally on Donald Becker's rtl8139.c driver, versions 1.11
|
|
and older. This driver was originally based on rtl8139.c
|
|
version 1.07. Header of rtl8139.c version 1.11:
|
|
|
|
-----<snip>-----
|
|
|
|
Written 1997-2000 by Donald Becker.
|
|
This software may be used and distributed according to the
|
|
terms of the GNU General Public License (GPL), incorporated
|
|
herein by reference. Drivers based on or derived from this
|
|
code fall under the GPL and must retain the authorship,
|
|
copyright and license notice. This file is not a complete
|
|
program and may only be used when the entire operating
|
|
system is licensed under the GPL.
|
|
|
|
This driver is for boards based on the RTL8129 and RTL8139
|
|
PCI ethernet chips.
|
|
|
|
The author may be reached as becker@scyld.com, or C/O Scyld
|
|
Computing Corporation 410 Severn Ave., Suite 210 Annapolis
|
|
MD 21403
|
|
|
|
Support and updates available at
|
|
http://www.scyld.com/network/rtl8139.html
|
|
|
|
Twister-tuning table provided by Kinston
|
|
<shangh@realtek.com.tw>.
|
|
|
|
-----<snip>-----
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU General Public License, incorporated herein by reference.
|
|
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
Theory of Operation
|
|
|
|
I. Board Compatibility
|
|
|
|
This device driver is designed for the RealTek RTL8139 series, the RealTek
|
|
Fast Ethernet controllers for PCI and CardBus. This chip is used on many
|
|
low-end boards, sometimes with its markings changed.
|
|
|
|
|
|
II. Board-specific settings
|
|
|
|
PCI bus devices are configured by the system at boot time, so no jumpers
|
|
need to be set on the board. The system BIOS will assign the
|
|
PCI INTA signal to a (preferably otherwise unused) system IRQ line.
|
|
|
|
III. Driver operation
|
|
|
|
IIIa. Rx Ring buffers
|
|
|
|
The receive unit uses a single linear ring buffer rather than the more
|
|
common (and more efficient) descriptor-based architecture. Incoming frames
|
|
are sequentially stored into the Rx region, and the host copies them into
|
|
skbuffs.
|
|
|
|
Comment: While it is theoretically possible to process many frames in place,
|
|
any delay in Rx processing would cause us to drop frames. More importantly,
|
|
the Linux protocol stack is not designed to operate in this manner.
|
|
|
|
IIIb. Tx operation
|
|
|
|
The RTL8139 uses a fixed set of four Tx descriptors in register space.
|
|
In a stunningly bad design choice, Tx frames must be 32 bit aligned. Linux
|
|
aligns the IP header on word boundaries, and 14 byte ethernet header means
|
|
that almost all frames will need to be copied to an alignment buffer.
|
|
|
|
IVb. References
|
|
|
|
http://www.realtek.com.tw/
|
|
http://www.scyld.com/expert/NWay.html
|
|
|
|
IVc. Errata
|
|
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/io.h>
|
|
|
|
#define NETDRV_VERSION "1.0.1"
|
|
#define MODNAME "netdrv"
|
|
#define NETDRV_DRIVER_LOAD_MSG "MyVendor Fast Ethernet driver " NETDRV_VERSION " loaded"
|
|
|
|
static char version[] __devinitdata =
|
|
KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
|
|
" Support available from http://foo.com/bar/baz.html\n";
|
|
|
|
/* define to 1 to enable PIO instead of MMIO */
|
|
#undef USE_IO_OPS
|
|
|
|
/* define to 1 to enable copious debugging info */
|
|
#undef NETDRV_DEBUG
|
|
|
|
/* define to 1 to disable lightweight runtime debugging checks */
|
|
#undef NETDRV_NDEBUG
|
|
|
|
|
|
#ifdef NETDRV_DEBUG
|
|
/* note: prints function name for you */
|
|
#define DPRINTK(fmt, args...) \
|
|
printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
|
|
#else
|
|
#define DPRINTK(fmt, args...) \
|
|
do { \
|
|
if (0) \
|
|
printk(KERN_DEBUG fmt, ##args); \
|
|
} while (0)
|
|
#endif
|
|
|
|
#ifdef NETDRV_NDEBUG
|
|
#define assert(expr) do {} while (0)
|
|
#else
|
|
#define assert(expr) \
|
|
if (!(expr)) { \
|
|
printk("Assertion failed! %s,%s,%s,line=%d\n", \
|
|
#expr, __FILE__, __func__, __LINE__); \
|
|
}
|
|
#endif
|
|
|
|
|
|
/* A few user-configurable values. */
|
|
/* media options */
|
|
static int media[] = {-1, -1, -1, -1, -1, -1, -1, -1};
|
|
|
|
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
|
|
static int max_interrupt_work = 20;
|
|
|
|
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
|
|
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
|
|
static int multicast_filter_limit = 32;
|
|
|
|
/* Size of the in-memory receive ring. */
|
|
#define RX_BUF_LEN_IDX 2 /* 0==8K, 1==16K, 2==32K, 3==64K */
|
|
#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
|
|
#define RX_BUF_PAD 16
|
|
#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
|
|
#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
|
|
|
|
/* Number of Tx descriptor registers. */
|
|
#define NUM_TX_DESC 4
|
|
|
|
/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
|
|
#define MAX_ETH_FRAME_SIZE 1536
|
|
|
|
/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
|
|
#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
|
|
#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
|
|
|
|
/* PCI Tuning Parameters
|
|
Threshold is bytes transferred to chip before transmission starts. */
|
|
#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
|
|
|
|
/* The following settings are log_2(bytes)-4:
|
|
0==16 bytes 1==32 2==64 3==128 4==256 5==512 6==1024 7==end of packet.
|
|
*/
|
|
#define RX_FIFO_THRESH 6 /* Rx buffer level before first PCI xfer. */
|
|
#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
|
|
#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
|
|
|
|
|
|
/* Operational parameters that usually are not changed. */
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (6 * HZ)
|
|
|
|
enum {
|
|
HAS_CHIP_XCVR = 0x020000,
|
|
HAS_LNK_CHNG = 0x040000,
|
|
};
|
|
|
|
#define NETDRV_MIN_IO_SIZE 0x80
|
|
#define RTL8139B_IO_SIZE 256
|
|
|
|
#define NETDRV_CAPS (HAS_CHIP_XCVR | HAS_LNK_CHNG)
|
|
|
|
typedef enum {
|
|
RTL8139 = 0,
|
|
NETDRV_CB,
|
|
SMC1211TX,
|
|
/*MPX5030,*/
|
|
DELTA8139,
|
|
ADDTRON8139,
|
|
} board_t;
|
|
|
|
|
|
/* indexed by board_t, above */
|
|
static struct {
|
|
const char *name;
|
|
} board_info[] __devinitdata = {
|
|
{ "RealTek RTL8139 Fast Ethernet" },
|
|
{ "RealTek RTL8139B PCI/CardBus" },
|
|
{ "SMC1211TX EZCard 10/100 (RealTek RTL8139)" },
|
|
/* { MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/
|
|
{ "Delta Electronics 8139 10/100BaseTX" },
|
|
{ "Addtron Technolgy 8139 10/100BaseTX" },
|
|
};
|
|
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(netdrv_pci_tbl) = {
|
|
{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
|
|
{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NETDRV_CB },
|
|
{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMC1211TX },
|
|
/* {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MPX5030 },*/
|
|
{0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DELTA8139 },
|
|
{0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ADDTRON8139 },
|
|
{0,}
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, netdrv_pci_tbl);
|
|
|
|
|
|
/* The rest of these values should never change. */
|
|
|
|
/* Symbolic offsets to registers. */
|
|
enum NETDRV_registers {
|
|
MAC0 = 0, /* Ethernet hardware address. */
|
|
MAR0 = 8, /* Multicast filter. */
|
|
TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
|
|
TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
|
|
RxBuf = 0x30,
|
|
RxEarlyCnt = 0x34,
|
|
RxEarlyStatus = 0x36,
|
|
ChipCmd = 0x37,
|
|
RxBufPtr = 0x38,
|
|
RxBufAddr = 0x3A,
|
|
IntrMask = 0x3C,
|
|
IntrStatus = 0x3E,
|
|
TxConfig = 0x40,
|
|
ChipVersion = 0x43,
|
|
RxConfig = 0x44,
|
|
Timer = 0x48, /* A general-purpose counter. */
|
|
RxMissed = 0x4C, /* 24 bits valid, write clears. */
|
|
Cfg9346 = 0x50,
|
|
Config0 = 0x51,
|
|
Config1 = 0x52,
|
|
FlashReg = 0x54,
|
|
MediaStatus = 0x58,
|
|
Config3 = 0x59,
|
|
Config4 = 0x5A, /* absent on RTL-8139A */
|
|
HltClk = 0x5B,
|
|
MultiIntr = 0x5C,
|
|
TxSummary = 0x60,
|
|
BasicModeCtrl = 0x62,
|
|
BasicModeStatus = 0x64,
|
|
NWayAdvert = 0x66,
|
|
NWayLPAR = 0x68,
|
|
NWayExpansion = 0x6A,
|
|
/* Undocumented registers, but required for proper operation. */
|
|
FIFOTMS = 0x70, /* FIFO Control and test. */
|
|
CSCR = 0x74, /* Chip Status and Configuration Register. */
|
|
PARA78 = 0x78,
|
|
PARA7c = 0x7c, /* Magic transceiver parameter register. */
|
|
Config5 = 0xD8, /* absent on RTL-8139A */
|
|
};
|
|
|
|
enum ClearBitMasks {
|
|
MultiIntrClear = 0xF000,
|
|
ChipCmdClear = 0xE2,
|
|
Config1Clear = (1 << 7) | (1 << 6) | (1 << 3) | (1 << 2) | (1 << 1),
|
|
};
|
|
|
|
enum ChipCmdBits {
|
|
CmdReset = 0x10,
|
|
CmdRxEnb = 0x08,
|
|
CmdTxEnb = 0x04,
|
|
RxBufEmpty = 0x01,
|
|
};
|
|
|
|
/* Interrupt register bits, using my own meaningful names. */
|
|
enum IntrStatusBits {
|
|
PCIErr = 0x8000,
|
|
PCSTimeout = 0x4000,
|
|
RxFIFOOver = 0x40,
|
|
RxUnderrun = 0x20,
|
|
RxOverflow = 0x10,
|
|
TxErr = 0x08,
|
|
TxOK = 0x04,
|
|
RxErr = 0x02,
|
|
RxOK = 0x01,
|
|
};
|
|
enum TxStatusBits {
|
|
TxHostOwns = 0x2000,
|
|
TxUnderrun = 0x4000,
|
|
TxStatOK = 0x8000,
|
|
TxOutOfWindow = 0x20000000,
|
|
TxAborted = 0x40000000,
|
|
TxCarrierLost = 0x80000000,
|
|
};
|
|
enum RxStatusBits {
|
|
RxMulticast = 0x8000,
|
|
RxPhysical = 0x4000,
|
|
RxBroadcast = 0x2000,
|
|
RxBadSymbol = 0x0020,
|
|
RxRunt = 0x0010,
|
|
RxTooLong = 0x0008,
|
|
RxCRCErr = 0x0004,
|
|
RxBadAlign = 0x0002,
|
|
RxStatusOK = 0x0001,
|
|
};
|
|
|
|
/* Bits in RxConfig. */
|
|
enum rx_mode_bits {
|
|
AcceptErr = 0x20,
|
|
AcceptRunt = 0x10,
|
|
AcceptBroadcast = 0x08,
|
|
AcceptMulticast = 0x04,
|
|
AcceptMyPhys = 0x02,
|
|
AcceptAllPhys = 0x01,
|
|
};
|
|
|
|
/* Bits in TxConfig. */
|
|
enum tx_config_bits {
|
|
TxIFG1 = (1 << 25), /* Interframe Gap Time */
|
|
TxIFG0 = (1 << 24), /* Enabling these bits violates IEEE 802.3 */
|
|
TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
|
|
TxCRC = (1 << 16), /* DISABLE appending CRC to end of Tx packets */
|
|
TxClearAbt = (1 << 0), /* Clear abort (WO) */
|
|
TxDMAShift = 8, /* DMA burst value(0-7) is shift this many bits */
|
|
|
|
TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
|
|
};
|
|
|
|
/* Bits in Config1 */
|
|
enum Config1Bits {
|
|
Cfg1_PM_Enable = 0x01,
|
|
Cfg1_VPD_Enable = 0x02,
|
|
Cfg1_PIO = 0x04,
|
|
Cfg1_MMIO = 0x08,
|
|
Cfg1_LWAKE = 0x10,
|
|
Cfg1_Driver_Load = 0x20,
|
|
Cfg1_LED0 = 0x40,
|
|
Cfg1_LED1 = 0x80,
|
|
};
|
|
|
|
enum RxConfigBits {
|
|
/* Early Rx threshold, none or X/16 */
|
|
RxCfgEarlyRxNone = 0,
|
|
RxCfgEarlyRxShift = 24,
|
|
|
|
/* rx fifo threshold */
|
|
RxCfgFIFOShift = 13,
|
|
RxCfgFIFONone = (7 << RxCfgFIFOShift),
|
|
|
|
/* Max DMA burst */
|
|
RxCfgDMAShift = 8,
|
|
RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
|
|
|
|
/* rx ring buffer length */
|
|
RxCfgRcv8K = 0,
|
|
RxCfgRcv16K = (1 << 11),
|
|
RxCfgRcv32K = (1 << 12),
|
|
RxCfgRcv64K = (1 << 11) | (1 << 12),
|
|
|
|
/* Disable packet wrap at end of Rx buffer */
|
|
RxNoWrap = (1 << 7),
|
|
};
|
|
|
|
|
|
/* Twister tuning parameters from RealTek.
|
|
Completely undocumented, but required to tune bad links. */
|
|
enum CSCRBits {
|
|
CSCR_LinkOKBit = 0x0400,
|
|
CSCR_LinkChangeBit = 0x0800,
|
|
CSCR_LinkStatusBits = 0x0f000,
|
|
CSCR_LinkDownOffCmd = 0x003c0,
|
|
CSCR_LinkDownCmd = 0x0f3c0,
|
|
};
|
|
|
|
|
|
enum Cfg9346Bits {
|
|
Cfg9346_Lock = 0x00,
|
|
Cfg9346_Unlock = 0xC0,
|
|
};
|
|
|
|
|
|
#define PARA78_default 0x78fa8388
|
|
#define PARA7c_default 0xcb38de43 /* param[0][3] */
|
|
#define PARA7c_xxx 0xcb38de43
|
|
static const unsigned long param[4][4] = {
|
|
{0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
|
|
{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
|
|
{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
|
|
{0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
|
|
};
|
|
|
|
struct ring_info {
|
|
struct sk_buff *skb;
|
|
dma_addr_t mapping;
|
|
};
|
|
|
|
|
|
typedef enum {
|
|
CH_8139 = 0,
|
|
CH_8139_K,
|
|
CH_8139A,
|
|
CH_8139B,
|
|
CH_8130,
|
|
CH_8139C,
|
|
} chip_t;
|
|
|
|
|
|
/* directly indexed by chip_t, above */
|
|
static const struct {
|
|
const char *name;
|
|
u8 version; /* from RTL8139C docs */
|
|
u32 RxConfigMask; /* should clear the bits supported by this chip */
|
|
} rtl_chip_info[] = {
|
|
{ "RTL-8139",
|
|
0x40,
|
|
0xf0fe0040, /* XXX copied from RTL8139A, verify */
|
|
},
|
|
|
|
{ "RTL-8139 rev K",
|
|
0x60,
|
|
0xf0fe0040,
|
|
},
|
|
|
|
{ "RTL-8139A",
|
|
0x70,
|
|
0xf0fe0040,
|
|
},
|
|
|
|
{ "RTL-8139B",
|
|
0x78,
|
|
0xf0fc0040
|
|
},
|
|
|
|
{ "RTL-8130",
|
|
0x7C,
|
|
0xf0fe0040, /* XXX copied from RTL8139A, verify */
|
|
},
|
|
|
|
{ "RTL-8139C",
|
|
0x74,
|
|
0xf0fc0040, /* XXX copied from RTL8139B, verify */
|
|
},
|
|
|
|
};
|
|
|
|
|
|
struct netdrv_private {
|
|
board_t board;
|
|
void *mmio_addr;
|
|
int drv_flags;
|
|
struct pci_dev *pci_dev;
|
|
struct timer_list timer; /* Media selection timer. */
|
|
unsigned char *rx_ring;
|
|
unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */
|
|
unsigned int tx_flag;
|
|
atomic_t cur_tx;
|
|
atomic_t dirty_tx;
|
|
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
|
|
struct ring_info tx_info[NUM_TX_DESC];
|
|
unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
|
|
unsigned char *tx_bufs; /* Tx bounce buffer region. */
|
|
dma_addr_t rx_ring_dma;
|
|
dma_addr_t tx_bufs_dma;
|
|
char phys[4]; /* MII device addresses. */
|
|
char twistie, twist_row, twist_col; /* Twister tune state. */
|
|
unsigned int full_duplex:1; /* Full-duplex operation requested. */
|
|
unsigned int duplex_lock:1;
|
|
unsigned int default_port:4; /* Last dev->if_port value. */
|
|
unsigned int media2:4; /* Secondary monitored media port. */
|
|
unsigned int medialock:1; /* Don't sense media type. */
|
|
unsigned int mediasense:1; /* Media sensing in progress. */
|
|
spinlock_t lock;
|
|
chip_t chipset;
|
|
};
|
|
|
|
MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
|
|
MODULE_DESCRIPTION("Skeleton for a PCI Fast Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
module_param(multicast_filter_limit, int, 0);
|
|
module_param(max_interrupt_work, int, 0);
|
|
module_param_array(media, int, NULL, 0);
|
|
MODULE_PARM_DESC(multicast_filter_limit,
|
|
MODNAME " maximum number of filtered multicast addresses");
|
|
MODULE_PARM_DESC(max_interrupt_work,
|
|
MODNAME " maximum events handled per interrupt");
|
|
MODULE_PARM_DESC(media,
|
|
MODNAME " Bits 0-3: media type, bit 17: full duplex");
|
|
|
|
static int read_eeprom(void *ioaddr, int location, int addr_len);
|
|
static int netdrv_open(struct net_device *dev);
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location);
|
|
static void mdio_write(struct net_device *dev, int phy_id, int location,
|
|
int val);
|
|
static void netdrv_timer(unsigned long data);
|
|
static void netdrv_tx_timeout(struct net_device *dev);
|
|
static void netdrv_init_ring(struct net_device *dev);
|
|
static int netdrv_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev);
|
|
static irqreturn_t netdrv_interrupt(int irq, void *dev_instance);
|
|
static int netdrv_close(struct net_device *dev);
|
|
static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static void netdrv_set_rx_mode(struct net_device *dev);
|
|
static void netdrv_hw_start(struct net_device *dev);
|
|
|
|
|
|
#ifdef USE_IO_OPS
|
|
|
|
#define NETDRV_R8(reg) inb(((unsigned long)ioaddr) + (reg))
|
|
#define NETDRV_R16(reg) inw(((unsigned long)ioaddr) + (reg))
|
|
#define NETDRV_R32(reg) ((unsigned long)inl(((unsigned long)ioaddr) + (reg)))
|
|
#define NETDRV_W8(reg, val8) outb((val8), ((unsigned long)ioaddr) + (reg))
|
|
#define NETDRV_W16(reg, val16) outw((val16), ((unsigned long)ioaddr) + (reg))
|
|
#define NETDRV_W32(reg, val32) outl((val32), ((unsigned long)ioaddr) + (reg))
|
|
#define NETDRV_W8_F NETDRV_W8
|
|
#define NETDRV_W16_F NETDRV_W16
|
|
#define NETDRV_W32_F NETDRV_W32
|
|
#undef readb
|
|
#undef readw
|
|
#undef readl
|
|
#undef writeb
|
|
#undef writew
|
|
#undef writel
|
|
#define readb(addr) inb((unsigned long)(addr))
|
|
#define readw(addr) inw((unsigned long)(addr))
|
|
#define readl(addr) inl((unsigned long)(addr))
|
|
#define writeb(val, addr) outb((val), (unsigned long)(addr))
|
|
#define writew(val, addr) outw((val), (unsigned long)(addr))
|
|
#define writel(val, addr) outl((val), (unsigned long)(addr))
|
|
|
|
#else
|
|
|
|
/* write MMIO register, with flush */
|
|
/* Flush avoids rtl8139 bug w/ posted MMIO writes */
|
|
#define NETDRV_W8_F(reg, val8) \
|
|
do { \
|
|
writeb((val8), ioaddr + (reg)); \
|
|
readb(ioaddr + (reg)); \
|
|
} while (0)
|
|
#define NETDRV_W16_F(reg, val16) \
|
|
do { \
|
|
writew((val16), ioaddr + (reg)); \
|
|
readw(ioaddr + (reg)); \
|
|
} while (0)
|
|
#define NETDRV_W32_F(reg, val32) \
|
|
do { \
|
|
writel((val32), ioaddr + (reg)); \
|
|
readl(ioaddr + (reg)); \
|
|
} while (0)
|
|
|
|
|
|
#ifdef MMIO_FLUSH_AUDIT_COMPLETE
|
|
|
|
/* write MMIO register */
|
|
#define NETDRV_W8(reg, val8) writeb((val8), ioaddr + (reg))
|
|
#define NETDRV_W16(reg, val16) writew((val16), ioaddr + (reg))
|
|
#define NETDRV_W32(reg, val32) writel((val32), ioaddr + (reg))
|
|
|
|
#else
|
|
|
|
/* write MMIO register, then flush */
|
|
#define NETDRV_W8 NETDRV_W8_F
|
|
#define NETDRV_W16 NETDRV_W16_F
|
|
#define NETDRV_W32 NETDRV_W32_F
|
|
|
|
#endif /* MMIO_FLUSH_AUDIT_COMPLETE */
|
|
|
|
/* read MMIO register */
|
|
#define NETDRV_R8(reg) readb(ioaddr + (reg))
|
|
#define NETDRV_R16(reg) readw(ioaddr + (reg))
|
|
#define NETDRV_R32(reg) ((unsigned long) readl(ioaddr + (reg)))
|
|
|
|
#endif /* USE_IO_OPS */
|
|
|
|
|
|
static const u16 netdrv_intr_mask =
|
|
PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
|
|
TxErr | TxOK | RxErr | RxOK;
|
|
|
|
static const unsigned int netdrv_rx_config =
|
|
RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap |
|
|
(RX_FIFO_THRESH << RxCfgFIFOShift) |
|
|
(RX_DMA_BURST << RxCfgDMAShift);
|
|
|
|
|
|
static int __devinit netdrv_init_board(struct pci_dev *pdev,
|
|
struct net_device **dev_out,
|
|
void **ioaddr_out)
|
|
{
|
|
void *ioaddr = NULL;
|
|
struct net_device *dev;
|
|
struct netdrv_private *tp;
|
|
int rc, i;
|
|
u32 pio_start, pio_end, pio_flags, pio_len;
|
|
unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
|
|
u32 tmp;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
assert(pdev != NULL);
|
|
assert(ioaddr_out != NULL);
|
|
|
|
*ioaddr_out = NULL;
|
|
*dev_out = NULL;
|
|
|
|
/* dev zeroed in alloc_etherdev */
|
|
dev = alloc_etherdev(sizeof(*tp));
|
|
if (dev == NULL) {
|
|
dev_err(&pdev->dev, "unable to alloc new ethernet\n");
|
|
DPRINTK("EXIT, returning -ENOMEM\n");
|
|
return -ENOMEM;
|
|
}
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
tp = netdev_priv(dev);
|
|
|
|
/* enable device(incl. PCI PM wakeup), and bus-mastering */
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
pio_start = pci_resource_start(pdev, 0);
|
|
pio_end = pci_resource_end(pdev, 0);
|
|
pio_flags = pci_resource_flags(pdev, 0);
|
|
pio_len = pci_resource_len(pdev, 0);
|
|
|
|
mmio_start = pci_resource_start(pdev, 1);
|
|
mmio_end = pci_resource_end(pdev, 1);
|
|
mmio_flags = pci_resource_flags(pdev, 1);
|
|
mmio_len = pci_resource_len(pdev, 1);
|
|
|
|
/* set this immediately, we need to know before
|
|
* we talk to the chip directly */
|
|
DPRINTK("PIO region size == %#02X\n", pio_len);
|
|
DPRINTK("MMIO region size == %#02lX\n", mmio_len);
|
|
|
|
/* make sure PCI base addr 0 is PIO */
|
|
if (!(pio_flags & IORESOURCE_IO)) {
|
|
dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
|
|
rc = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
/* make sure PCI base addr 1 is MMIO */
|
|
if (!(mmio_flags & IORESOURCE_MEM)) {
|
|
dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
|
|
rc = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
/* check for weird/broken PCI region reporting */
|
|
if ((pio_len < NETDRV_MIN_IO_SIZE) ||
|
|
(mmio_len < NETDRV_MIN_IO_SIZE)) {
|
|
dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n");
|
|
rc = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
rc = pci_request_regions(pdev, MODNAME);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
#ifdef USE_IO_OPS
|
|
ioaddr = (void *)pio_start;
|
|
#else
|
|
/* ioremap MMIO region */
|
|
ioaddr = ioremap(mmio_start, mmio_len);
|
|
if (ioaddr == NULL) {
|
|
dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
|
|
rc = -EIO;
|
|
goto err_out_free_res;
|
|
}
|
|
#endif /* USE_IO_OPS */
|
|
|
|
/* Soft reset the chip. */
|
|
NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
|
|
|
|
/* Check that the chip has finished the reset. */
|
|
for (i = 1000; i > 0; i--)
|
|
if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
|
|
break;
|
|
else
|
|
udelay(10);
|
|
|
|
/* Bring the chip out of low-power mode. */
|
|
/* <insert device-specific code here> */
|
|
|
|
#ifndef USE_IO_OPS
|
|
/* sanity checks -- ensure PIO and MMIO registers agree */
|
|
assert(inb(pio_start+Config0) == readb(ioaddr+Config0));
|
|
assert(inb(pio_start+Config1) == readb(ioaddr+Config1));
|
|
assert(inb(pio_start+TxConfig) == readb(ioaddr+TxConfig));
|
|
assert(inb(pio_start+RxConfig) == readb(ioaddr+RxConfig));
|
|
#endif /* !USE_IO_OPS */
|
|
|
|
/* identify chip attached to board */
|
|
tmp = NETDRV_R8(ChipVersion);
|
|
for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--)
|
|
if (tmp == rtl_chip_info[i].version) {
|
|
tp->chipset = i;
|
|
goto match;
|
|
}
|
|
|
|
/* if unknown chip, assume array element #0, original RTL-8139 in this case */
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"unknown chip version, assuming RTL-8139\n");
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "TxConfig = %#lx\n",
|
|
NETDRV_R32(TxConfig));
|
|
tp->chipset = 0;
|
|
|
|
match:
|
|
DPRINTK("chipset id(%d) == index %d, '%s'\n",
|
|
tmp, tp->chipset, rtl_chip_info[tp->chipset].name);
|
|
|
|
rc = register_netdev(dev);
|
|
if (rc)
|
|
goto err_out_unmap;
|
|
|
|
DPRINTK("EXIT, returning 0\n");
|
|
*ioaddr_out = ioaddr;
|
|
*dev_out = dev;
|
|
return 0;
|
|
|
|
err_out_unmap:
|
|
#ifndef USE_IO_OPS
|
|
iounmap(ioaddr);
|
|
err_out_free_res:
|
|
#endif
|
|
pci_release_regions(pdev);
|
|
err_out:
|
|
free_netdev(dev);
|
|
DPRINTK("EXIT, returning %d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
static const struct net_device_ops netdrv_netdev_ops = {
|
|
.ndo_open = netdrv_open,
|
|
.ndo_stop = netdrv_close,
|
|
.ndo_start_xmit = netdrv_start_xmit,
|
|
.ndo_set_multicast_list = netdrv_set_rx_mode,
|
|
.ndo_do_ioctl = netdrv_ioctl,
|
|
.ndo_tx_timeout = netdrv_tx_timeout,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
};
|
|
|
|
static int __devinit netdrv_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *dev = NULL;
|
|
struct netdrv_private *tp;
|
|
int i, addr_len, option;
|
|
void *ioaddr = NULL;
|
|
static int board_idx = -1;
|
|
|
|
/* when built into the kernel, we only print version if device is found */
|
|
#ifndef MODULE
|
|
static int printed_version;
|
|
if (!printed_version++)
|
|
printk(version);
|
|
#endif
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
assert(pdev != NULL);
|
|
assert(ent != NULL);
|
|
|
|
board_idx++;
|
|
|
|
i = netdrv_init_board(pdev, &dev, &ioaddr);
|
|
if (i < 0) {
|
|
DPRINTK("EXIT, returning %d\n", i);
|
|
return i;
|
|
}
|
|
|
|
tp = netdev_priv(dev);
|
|
|
|
assert(ioaddr != NULL);
|
|
assert(dev != NULL);
|
|
assert(tp != NULL);
|
|
|
|
addr_len = read_eeprom(ioaddr, 0, 8) == 0x8129 ? 8 : 6;
|
|
for (i = 0; i < 3; i++)
|
|
((u16 *)(dev->dev_addr))[i] =
|
|
le16_to_cpu(read_eeprom(ioaddr, i + 7, addr_len));
|
|
|
|
dev->netdev_ops = &netdrv_netdev_ops;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
dev->irq = pdev->irq;
|
|
dev->base_addr = (unsigned long) ioaddr;
|
|
|
|
/* netdev_priv()/tp zeroed and aligned in alloc_etherdev */
|
|
tp = netdev_priv(dev);
|
|
|
|
/* note: tp->chipset set in netdrv_init_board */
|
|
tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER | NETDRV_CAPS;
|
|
tp->pci_dev = pdev;
|
|
tp->board = ent->driver_data;
|
|
tp->mmio_addr = ioaddr;
|
|
spin_lock_init(&tp->lock);
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
tp->phys[0] = 32;
|
|
|
|
netdev_info(dev, "%s at %#lx, %pM IRQ %d\n",
|
|
board_info[ent->driver_data].name,
|
|
dev->base_addr, dev->dev_addr, dev->irq);
|
|
|
|
netdev_printk(KERN_DEBUG, dev, "Identified 8139 chip type '%s'\n",
|
|
rtl_chip_info[tp->chipset].name);
|
|
|
|
/* Put the chip into low-power mode. */
|
|
NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
|
|
|
|
/* The lower four bits are the media type. */
|
|
option = (board_idx > 7) ? 0 : media[board_idx];
|
|
if (option > 0) {
|
|
tp->full_duplex = (option & 0x200) ? 1 : 0;
|
|
tp->default_port = option & 15;
|
|
if (tp->default_port)
|
|
tp->medialock = 1;
|
|
}
|
|
|
|
if (tp->full_duplex) {
|
|
netdev_info(dev, "Media type forced to Full Duplex\n");
|
|
mdio_write(dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
|
|
tp->duplex_lock = 1;
|
|
}
|
|
|
|
DPRINTK("EXIT - returning 0\n");
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void __devexit netdrv_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct netdrv_private *np;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
assert(dev != NULL);
|
|
|
|
np = netdev_priv(dev);
|
|
assert(np != NULL);
|
|
|
|
unregister_netdev(dev);
|
|
|
|
#ifndef USE_IO_OPS
|
|
iounmap(np->mmio_addr);
|
|
#endif /* !USE_IO_OPS */
|
|
|
|
pci_release_regions(pdev);
|
|
|
|
free_netdev(dev);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
|
|
/* Serial EEPROM section. */
|
|
|
|
/* EEPROM_Ctrl bits. */
|
|
#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
|
|
#define EE_CS 0x08 /* EEPROM chip select. */
|
|
#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
|
|
#define EE_WRITE_0 0x00
|
|
#define EE_WRITE_1 0x02
|
|
#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
|
|
#define EE_ENB (0x80 | EE_CS)
|
|
|
|
/* Delay between EEPROM clock transitions.
|
|
No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
|
|
*/
|
|
|
|
#define eeprom_delay() readl(ee_addr)
|
|
|
|
/* The EEPROM commands include the alway-set leading bit. */
|
|
#define EE_WRITE_CMD (5)
|
|
#define EE_READ_CMD (6)
|
|
#define EE_ERASE_CMD (7)
|
|
|
|
static int __devinit read_eeprom(void *ioaddr, int location, int addr_len)
|
|
{
|
|
int i;
|
|
unsigned retval = 0;
|
|
void *ee_addr = ioaddr + Cfg9346;
|
|
int read_cmd = location | (EE_READ_CMD << addr_len);
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
writeb(EE_ENB & ~EE_CS, ee_addr);
|
|
writeb(EE_ENB, ee_addr);
|
|
eeprom_delay();
|
|
|
|
/* Shift the read command bits out. */
|
|
for (i = 4 + addr_len; i >= 0; i--) {
|
|
int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
|
|
writeb(EE_ENB | dataval, ee_addr);
|
|
eeprom_delay();
|
|
writeb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
|
|
eeprom_delay();
|
|
}
|
|
writeb(EE_ENB, ee_addr);
|
|
eeprom_delay();
|
|
|
|
for (i = 16; i > 0; i--) {
|
|
writeb(EE_ENB | EE_SHIFT_CLK, ee_addr);
|
|
eeprom_delay();
|
|
retval =
|
|
(retval << 1) | ((readb(ee_addr) & EE_DATA_READ) ? 1 :
|
|
0);
|
|
writeb(EE_ENB, ee_addr);
|
|
eeprom_delay();
|
|
}
|
|
|
|
/* Terminate the EEPROM access. */
|
|
writeb(~EE_CS, ee_addr);
|
|
eeprom_delay();
|
|
|
|
DPRINTK("EXIT - returning %d\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
/* MII serial management: mostly bogus for now. */
|
|
/* Read and write the MII management registers using software-generated
|
|
serial MDIO protocol.
|
|
The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
|
|
met by back-to-back PCI I/O cycles, but we insert a delay to avoid
|
|
"overclocking" issues. */
|
|
#define MDIO_DIR 0x80
|
|
#define MDIO_DATA_OUT 0x04
|
|
#define MDIO_DATA_IN 0x02
|
|
#define MDIO_CLK 0x01
|
|
#define MDIO_WRITE0 (MDIO_DIR)
|
|
#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
|
|
|
|
#define mdio_delay() readb(mdio_addr)
|
|
|
|
|
|
static char mii_2_8139_map[8] = {
|
|
BasicModeCtrl,
|
|
BasicModeStatus,
|
|
0,
|
|
0,
|
|
NWayAdvert,
|
|
NWayLPAR,
|
|
NWayExpansion,
|
|
0
|
|
};
|
|
|
|
|
|
/* Syncronize the MII management interface by shifting 32 one bits out. */
|
|
static void mdio_sync(void *mdio_addr)
|
|
{
|
|
int i;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
for (i = 32; i >= 0; i--) {
|
|
writeb(MDIO_WRITE1, mdio_addr);
|
|
mdio_delay();
|
|
writeb(MDIO_WRITE1 | MDIO_CLK, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
void *mdio_addr = tp->mmio_addr + Config4;
|
|
int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
|
|
int retval = 0;
|
|
int i;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
if (phy_id > 31) { /* Really a 8139. Use internal registers. */
|
|
DPRINTK("EXIT after directly using 8139 internal regs\n");
|
|
return location < 8 && mii_2_8139_map[location] ?
|
|
readw(tp->mmio_addr + mii_2_8139_map[location]) : 0;
|
|
}
|
|
mdio_sync(mdio_addr);
|
|
/* Shift the read command bits out. */
|
|
for (i = 15; i >= 0; i--) {
|
|
int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
|
|
|
|
writeb(MDIO_DIR | dataval, mdio_addr);
|
|
mdio_delay();
|
|
writeb(MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
|
|
/* Read the two transition, 16 data, and wire-idle bits. */
|
|
for (i = 19; i > 0; i--) {
|
|
writeb(0, mdio_addr);
|
|
mdio_delay();
|
|
retval = ((retval << 1) | ((readb(mdio_addr) & MDIO_DATA_IN))
|
|
? 1 : 0);
|
|
writeb(MDIO_CLK, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
|
|
DPRINTK("EXIT, returning %d\n", (retval >> 1) & 0xffff);
|
|
return (retval >> 1) & 0xffff;
|
|
}
|
|
|
|
|
|
static void mdio_write(struct net_device *dev, int phy_id, int location,
|
|
int value)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
void *mdio_addr = tp->mmio_addr + Config4;
|
|
int mii_cmd =
|
|
(0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
|
|
int i;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
if (phy_id > 31) { /* Really a 8139. Use internal registers. */
|
|
if (location < 8 && mii_2_8139_map[location]) {
|
|
writew(value,
|
|
tp->mmio_addr + mii_2_8139_map[location]);
|
|
readw(tp->mmio_addr + mii_2_8139_map[location]);
|
|
}
|
|
DPRINTK("EXIT after directly using 8139 internal regs\n");
|
|
return;
|
|
}
|
|
mdio_sync(mdio_addr);
|
|
|
|
/* Shift the command bits out. */
|
|
for (i = 31; i >= 0; i--) {
|
|
int dataval =
|
|
(mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
|
|
writeb(dataval, mdio_addr);
|
|
mdio_delay();
|
|
writeb(dataval | MDIO_CLK, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
|
|
/* Clear out extra bits. */
|
|
for (i = 2; i > 0; i--) {
|
|
writeb(0, mdio_addr);
|
|
mdio_delay();
|
|
writeb(MDIO_CLK, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
|
|
static int netdrv_open(struct net_device *dev)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
int retval;
|
|
void *ioaddr = tp->mmio_addr;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
retval = request_irq(dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
|
|
if (retval) {
|
|
DPRINTK("EXIT, returning %d\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
|
|
&tp->tx_bufs_dma);
|
|
tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
|
|
&tp->rx_ring_dma);
|
|
if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
|
|
free_irq(dev->irq, dev);
|
|
|
|
if (tp->tx_bufs)
|
|
pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
|
|
tp->tx_bufs, tp->tx_bufs_dma);
|
|
if (tp->rx_ring)
|
|
pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
|
|
tp->rx_ring, tp->rx_ring_dma);
|
|
|
|
DPRINTK("EXIT, returning -ENOMEM\n");
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
tp->full_duplex = tp->duplex_lock;
|
|
tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
|
|
|
|
netdrv_init_ring(dev);
|
|
netdrv_hw_start(dev);
|
|
|
|
netdev_dbg(dev, "ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
|
|
(unsigned long long)pci_resource_start(tp->pci_dev, 1),
|
|
dev->irq, NETDRV_R8(MediaStatus),
|
|
tp->full_duplex ? "full" : "half");
|
|
|
|
/* Set the timer to switch to check for link beat and perhaps switch
|
|
to an alternate media type. */
|
|
init_timer(&tp->timer);
|
|
tp->timer.expires = jiffies + 3 * HZ;
|
|
tp->timer.data = (unsigned long) dev;
|
|
tp->timer.function = netdrv_timer;
|
|
add_timer(&tp->timer);
|
|
|
|
DPRINTK("EXIT, returning 0\n");
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Start the hardware at open or resume. */
|
|
static void netdrv_hw_start(struct net_device *dev)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
void *ioaddr = tp->mmio_addr;
|
|
u32 i;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
/* Soft reset the chip. */
|
|
NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
|
|
udelay(100);
|
|
|
|
/* Check that the chip has finished the reset. */
|
|
for (i = 1000; i > 0; i--)
|
|
if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
|
|
break;
|
|
|
|
/* Restore our idea of the MAC address. */
|
|
NETDRV_W32_F(MAC0 + 0, cpu_to_le32(*(u32 *)(dev->dev_addr + 0)));
|
|
NETDRV_W32_F(MAC0 + 4, cpu_to_le32(*(u32 *)(dev->dev_addr + 4)));
|
|
|
|
/* Must enable Tx/Rx before setting transfer thresholds! */
|
|
NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
|
|
CmdRxEnb | CmdTxEnb);
|
|
|
|
i = netdrv_rx_config |
|
|
(NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
|
|
NETDRV_W32_F(RxConfig, i);
|
|
|
|
/* Check this value: the documentation for IFG contradicts ifself. */
|
|
NETDRV_W32(TxConfig, (TX_DMA_BURST << TxDMAShift));
|
|
|
|
/* unlock Config[01234] and BMCR register writes */
|
|
NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
|
|
udelay(10);
|
|
|
|
tp->cur_rx = 0;
|
|
|
|
/* Lock Config[01234] and BMCR register writes */
|
|
NETDRV_W8_F(Cfg9346, Cfg9346_Lock);
|
|
udelay(10);
|
|
|
|
/* init Rx ring buffer DMA address */
|
|
NETDRV_W32_F(RxBuf, tp->rx_ring_dma);
|
|
|
|
/* init Tx buffer DMA addresses */
|
|
for (i = 0; i < NUM_TX_DESC; i++)
|
|
NETDRV_W32_F(TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
|
|
|
|
NETDRV_W32_F(RxMissed, 0);
|
|
|
|
netdrv_set_rx_mode(dev);
|
|
|
|
/* no early-rx interrupts */
|
|
NETDRV_W16(MultiIntr, NETDRV_R16(MultiIntr) & MultiIntrClear);
|
|
|
|
/* make sure RxTx has started */
|
|
NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
|
|
CmdRxEnb | CmdTxEnb);
|
|
|
|
/* Enable all known interrupts by setting the interrupt mask. */
|
|
NETDRV_W16_F(IntrMask, netdrv_intr_mask);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
|
|
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
|
|
static void netdrv_init_ring(struct net_device *dev)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
int i;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
tp->cur_rx = 0;
|
|
atomic_set(&tp->cur_tx, 0);
|
|
atomic_set(&tp->dirty_tx, 0);
|
|
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
tp->tx_info[i].skb = NULL;
|
|
tp->tx_info[i].mapping = 0;
|
|
tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
|
|
}
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
|
|
static void netdrv_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *) data;
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
void *ioaddr = tp->mmio_addr;
|
|
int next_tick = 60 * HZ;
|
|
int mii_lpa;
|
|
|
|
mii_lpa = mdio_read(dev, tp->phys[0], MII_LPA);
|
|
|
|
if (!tp->duplex_lock && mii_lpa != 0xffff) {
|
|
int duplex = ((mii_lpa & LPA_100FULL) ||
|
|
(mii_lpa & 0x01C0) == 0x0040);
|
|
if (tp->full_duplex != duplex) {
|
|
tp->full_duplex = duplex;
|
|
netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
|
|
tp->full_duplex ? "full" : "half",
|
|
tp->phys[0], mii_lpa);
|
|
NETDRV_W8(Cfg9346, Cfg9346_Unlock);
|
|
NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
|
|
NETDRV_W8(Cfg9346, Cfg9346_Lock);
|
|
}
|
|
}
|
|
|
|
netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
|
|
NETDRV_R16(NWayLPAR));
|
|
netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x RxStatus %04lx\n",
|
|
NETDRV_R16(IntrMask),
|
|
NETDRV_R16(IntrStatus),
|
|
NETDRV_R32(RxEarlyStatus));
|
|
netdev_dbg(dev, "Chip config %02x %02x\n",
|
|
NETDRV_R8(Config0), NETDRV_R8(Config1));
|
|
|
|
tp->timer.expires = jiffies + next_tick;
|
|
add_timer(&tp->timer);
|
|
}
|
|
|
|
|
|
static void netdrv_tx_clear(struct net_device *dev)
|
|
{
|
|
int i;
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
|
|
atomic_set(&tp->cur_tx, 0);
|
|
atomic_set(&tp->dirty_tx, 0);
|
|
|
|
/* Dump the unsent Tx packets. */
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
struct ring_info *rp = &tp->tx_info[i];
|
|
if (rp->mapping != 0) {
|
|
pci_unmap_single(tp->pci_dev, rp->mapping,
|
|
rp->skb->len, PCI_DMA_TODEVICE);
|
|
rp->mapping = 0;
|
|
}
|
|
if (rp->skb) {
|
|
dev_kfree_skb(rp->skb);
|
|
rp->skb = NULL;
|
|
dev->stats.tx_dropped++;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static void netdrv_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
void *ioaddr = tp->mmio_addr;
|
|
int i;
|
|
u8 tmp8;
|
|
unsigned long flags;
|
|
|
|
netdev_dbg(dev, "Transmit timeout, status %02x %04x media %02x\n",
|
|
NETDRV_R8(ChipCmd),
|
|
NETDRV_R16(IntrStatus),
|
|
NETDRV_R8(MediaStatus));
|
|
|
|
/* disable Tx ASAP, if not already */
|
|
tmp8 = NETDRV_R8(ChipCmd);
|
|
if (tmp8 & CmdTxEnb)
|
|
NETDRV_W8(ChipCmd, tmp8 & ~CmdTxEnb);
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
NETDRV_W16(IntrMask, 0x0000);
|
|
|
|
/* Emit info to figure out what went wrong. */
|
|
netdev_dbg(dev, "Tx queue start entry %d dirty entry %d\n",
|
|
atomic_read(&tp->cur_tx),
|
|
atomic_read(&tp->dirty_tx));
|
|
for (i = 0; i < NUM_TX_DESC; i++)
|
|
netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
|
|
i, NETDRV_R32(TxStatus0 + (i * 4)),
|
|
i == atomic_read(&tp->dirty_tx) % NUM_TX_DESC ?
|
|
"(queue head)" : "");
|
|
|
|
/* Stop a shared interrupt from scavenging while we are. */
|
|
spin_lock_irqsave(&tp->lock, flags);
|
|
|
|
netdrv_tx_clear(dev);
|
|
|
|
spin_unlock_irqrestore(&tp->lock, flags);
|
|
|
|
/* ...and finally, reset everything */
|
|
netdrv_hw_start(dev);
|
|
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
|
|
|
|
static int netdrv_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
void *ioaddr = tp->mmio_addr;
|
|
int entry;
|
|
|
|
/* Calculate the next Tx descriptor entry. */
|
|
entry = atomic_read(&tp->cur_tx) % NUM_TX_DESC;
|
|
|
|
assert(tp->tx_info[entry].skb == NULL);
|
|
assert(tp->tx_info[entry].mapping == 0);
|
|
|
|
tp->tx_info[entry].skb = skb;
|
|
/* tp->tx_info[entry].mapping = 0; */
|
|
skb_copy_from_linear_data(skb, tp->tx_buf[entry], skb->len);
|
|
|
|
/* Note: the chip doesn't have auto-pad! */
|
|
NETDRV_W32(TxStatus0 + (entry * sizeof(u32)),
|
|
tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
|
|
|
|
atomic_inc(&tp->cur_tx);
|
|
if ((atomic_read(&tp->cur_tx) - atomic_read(&tp->dirty_tx)) >= NUM_TX_DESC)
|
|
netif_stop_queue(dev);
|
|
|
|
netdev_dbg(dev, "Queued Tx packet at %p size %u to slot %d\n",
|
|
skb->data, skb->len, entry);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
|
|
static void netdrv_tx_interrupt(struct net_device *dev,
|
|
struct netdrv_private *tp,
|
|
void *ioaddr)
|
|
{
|
|
int cur_tx, dirty_tx, tx_left;
|
|
|
|
assert(dev != NULL);
|
|
assert(tp != NULL);
|
|
assert(ioaddr != NULL);
|
|
|
|
dirty_tx = atomic_read(&tp->dirty_tx);
|
|
|
|
cur_tx = atomic_read(&tp->cur_tx);
|
|
tx_left = cur_tx - dirty_tx;
|
|
while (tx_left > 0) {
|
|
int entry = dirty_tx % NUM_TX_DESC;
|
|
int txstatus;
|
|
|
|
txstatus = NETDRV_R32(TxStatus0 + (entry * sizeof(u32)));
|
|
|
|
if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
|
|
break; /* It still hasn't been Txed */
|
|
|
|
/* Note: TxCarrierLost is always asserted at 100mbps. */
|
|
if (txstatus & (TxOutOfWindow | TxAborted)) {
|
|
/* There was an major error, log it. */
|
|
netdev_dbg(dev, "Transmit error, Tx status %#08x\n",
|
|
txstatus);
|
|
dev->stats.tx_errors++;
|
|
if (txstatus & TxAborted) {
|
|
dev->stats.tx_aborted_errors++;
|
|
NETDRV_W32(TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift));
|
|
}
|
|
if (txstatus & TxCarrierLost)
|
|
dev->stats.tx_carrier_errors++;
|
|
if (txstatus & TxOutOfWindow)
|
|
dev->stats.tx_window_errors++;
|
|
} else {
|
|
if (txstatus & TxUnderrun) {
|
|
/* Add 64 to the Tx FIFO threshold. */
|
|
if (tp->tx_flag < 0x00300000)
|
|
tp->tx_flag += 0x00020000;
|
|
dev->stats.tx_fifo_errors++;
|
|
}
|
|
dev->stats.collisions += (txstatus >> 24) & 15;
|
|
dev->stats.tx_bytes += txstatus & 0x7ff;
|
|
dev->stats.tx_packets++;
|
|
}
|
|
|
|
/* Free the original skb. */
|
|
if (tp->tx_info[entry].mapping != 0) {
|
|
pci_unmap_single(tp->pci_dev,
|
|
tp->tx_info[entry].mapping,
|
|
tp->tx_info[entry].skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
tp->tx_info[entry].mapping = 0;
|
|
}
|
|
dev_kfree_skb_irq(tp->tx_info[entry].skb);
|
|
tp->tx_info[entry].skb = NULL;
|
|
dirty_tx++;
|
|
if (dirty_tx < 0) { /* handle signed int overflow */
|
|
atomic_sub(cur_tx, &tp->cur_tx); /* XXX racy? */
|
|
dirty_tx = cur_tx - tx_left + 1;
|
|
}
|
|
if (netif_queue_stopped(dev))
|
|
netif_wake_queue(dev);
|
|
|
|
cur_tx = atomic_read(&tp->cur_tx);
|
|
tx_left = cur_tx - dirty_tx;
|
|
|
|
}
|
|
|
|
#ifndef NETDRV_NDEBUG
|
|
if (atomic_read(&tp->cur_tx) - dirty_tx > NUM_TX_DESC) {
|
|
netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d\n",
|
|
dirty_tx, atomic_read(&tp->cur_tx));
|
|
dirty_tx += NUM_TX_DESC;
|
|
}
|
|
#endif /* NETDRV_NDEBUG */
|
|
|
|
atomic_set(&tp->dirty_tx, dirty_tx);
|
|
}
|
|
|
|
|
|
/* TODO: clean this up! Rx reset need not be this intensive */
|
|
static void netdrv_rx_err(u32 rx_status, struct net_device *dev,
|
|
struct netdrv_private *tp, void *ioaddr)
|
|
{
|
|
u8 tmp8;
|
|
int tmp_work = 1000;
|
|
|
|
netdev_dbg(dev, "Ethernet frame had errors, status %08x\n", rx_status);
|
|
if (rx_status & RxTooLong)
|
|
netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
|
|
rx_status);
|
|
/* A.C.: The chip hangs here. */
|
|
dev->stats.rx_errors++;
|
|
if (rx_status & (RxBadSymbol | RxBadAlign))
|
|
dev->stats.rx_frame_errors++;
|
|
if (rx_status & (RxRunt | RxTooLong))
|
|
dev->stats.rx_length_errors++;
|
|
if (rx_status & RxCRCErr)
|
|
dev->stats.rx_crc_errors++;
|
|
/* Reset the receiver, based on RealTek recommendation.(Bug?) */
|
|
tp->cur_rx = 0;
|
|
|
|
/* disable receive */
|
|
tmp8 = NETDRV_R8(ChipCmd) & ChipCmdClear;
|
|
NETDRV_W8_F(ChipCmd, tmp8 | CmdTxEnb);
|
|
|
|
/* A.C.: Reset the multicast list. */
|
|
netdrv_set_rx_mode(dev);
|
|
|
|
/* XXX potentially temporary hack to
|
|
* restart hung receiver */
|
|
while (--tmp_work > 0) {
|
|
tmp8 = NETDRV_R8(ChipCmd);
|
|
if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
|
|
break;
|
|
NETDRV_W8_F(ChipCmd,
|
|
(tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb);
|
|
}
|
|
|
|
/* G.S.: Re-enable receiver */
|
|
/* XXX temporary hack to work around receiver hang */
|
|
netdrv_set_rx_mode(dev);
|
|
|
|
if (tmp_work <= 0)
|
|
netdev_warn(dev, "tx/rx enable wait too long\n");
|
|
}
|
|
|
|
|
|
/* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the
|
|
field alignments and semantics. */
|
|
static void netdrv_rx_interrupt(struct net_device *dev,
|
|
struct netdrv_private *tp, void *ioaddr)
|
|
{
|
|
unsigned char *rx_ring;
|
|
u16 cur_rx;
|
|
|
|
assert(dev != NULL);
|
|
assert(tp != NULL);
|
|
assert(ioaddr != NULL);
|
|
|
|
rx_ring = tp->rx_ring;
|
|
cur_rx = tp->cur_rx;
|
|
|
|
netdev_dbg(dev, "In netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
|
|
cur_rx, NETDRV_R16(RxBufAddr),
|
|
NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
|
|
|
|
while ((NETDRV_R8(ChipCmd) & RxBufEmpty) == 0) {
|
|
int ring_offset = cur_rx % RX_BUF_LEN;
|
|
u32 rx_status;
|
|
unsigned int rx_size;
|
|
unsigned int pkt_size;
|
|
struct sk_buff *skb;
|
|
|
|
/* read size+status of next frame from DMA ring buffer */
|
|
rx_status = le32_to_cpu(*(u32 *)(rx_ring + ring_offset));
|
|
rx_size = rx_status >> 16;
|
|
pkt_size = rx_size - 4;
|
|
|
|
netdev_dbg(dev, "netdrv_rx() status %04x, size %04x, cur %04x\n",
|
|
rx_status, rx_size, cur_rx);
|
|
#if defined(NETDRV_DEBUG) && (NETDRV_DEBUG > 2)
|
|
print_hex_dump_bytes("Frame contents: ", HEX_DUMP_OFFSET,
|
|
&rx_ring[ring_offset], 70);
|
|
#endif
|
|
|
|
/* If Rx err or invalid rx_size/rx_status received
|
|
*(which happens if we get lost in the ring),
|
|
* Rx process gets reset, so we abort any further
|
|
* Rx processing.
|
|
*/
|
|
if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
|
|
(!(rx_status & RxStatusOK))) {
|
|
netdrv_rx_err(rx_status, dev, tp, ioaddr);
|
|
return;
|
|
}
|
|
|
|
/* Malloc up new buffer, compatible with net-2e. */
|
|
/* Omit the four octet CRC from the length. */
|
|
|
|
/* TODO: consider allocating skb's outside of
|
|
* interrupt context, both to speed interrupt processing,
|
|
* and also to reduce the chances of having to
|
|
* drop packets here under memory pressure.
|
|
*/
|
|
|
|
skb = dev_alloc_skb(pkt_size + 2);
|
|
if (skb) {
|
|
skb_reserve(skb, 2); /* 16 byte align the IP fields. */
|
|
|
|
skb_copy_to_linear_data(skb, &rx_ring[ring_offset + 4], pkt_size);
|
|
skb_put(skb, pkt_size);
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
dev->stats.rx_bytes += pkt_size;
|
|
dev->stats.rx_packets++;
|
|
} else {
|
|
netdev_warn(dev, "Memory squeeze, dropping packet\n");
|
|
dev->stats.rx_dropped++;
|
|
}
|
|
|
|
cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
|
|
NETDRV_W16_F(RxBufPtr, cur_rx - 16);
|
|
}
|
|
|
|
netdev_dbg(dev, "Done netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
|
|
cur_rx, NETDRV_R16(RxBufAddr),
|
|
NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
|
|
|
|
tp->cur_rx = cur_rx;
|
|
}
|
|
|
|
|
|
static void netdrv_weird_interrupt(struct net_device *dev,
|
|
struct netdrv_private *tp,
|
|
void *ioaddr,
|
|
int status, int link_changed)
|
|
{
|
|
netdev_printk(KERN_DEBUG, dev, "Abnormal interrupt, status %08x\n",
|
|
status);
|
|
|
|
assert(dev != NULL);
|
|
assert(tp != NULL);
|
|
assert(ioaddr != NULL);
|
|
|
|
/* Update the error count. */
|
|
dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
|
|
NETDRV_W32(RxMissed, 0);
|
|
|
|
if ((status & RxUnderrun) && link_changed &&
|
|
(tp->drv_flags & HAS_LNK_CHNG)) {
|
|
/* Really link-change on new chips. */
|
|
int lpar = NETDRV_R16(NWayLPAR);
|
|
int duplex = ((lpar & 0x0100) || (lpar & 0x01C0) == 0x0040 ||
|
|
tp->duplex_lock);
|
|
if (tp->full_duplex != duplex) {
|
|
tp->full_duplex = duplex;
|
|
NETDRV_W8(Cfg9346, Cfg9346_Unlock);
|
|
NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
|
|
NETDRV_W8(Cfg9346, Cfg9346_Lock);
|
|
}
|
|
status &= ~RxUnderrun;
|
|
}
|
|
|
|
/* XXX along with netdrv_rx_err, are we double-counting errors? */
|
|
if (status & (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
|
|
dev->stats.rx_errors++;
|
|
|
|
if (status & (PCSTimeout))
|
|
dev->stats.rx_length_errors++;
|
|
if (status & (RxUnderrun | RxFIFOOver))
|
|
dev->stats.rx_fifo_errors++;
|
|
if (status & RxOverflow) {
|
|
dev->stats.rx_over_errors++;
|
|
tp->cur_rx = NETDRV_R16(RxBufAddr) % RX_BUF_LEN;
|
|
NETDRV_W16_F(RxBufPtr, tp->cur_rx - 16);
|
|
}
|
|
if (status & PCIErr) {
|
|
u16 pci_cmd_status;
|
|
pci_read_config_word(tp->pci_dev, PCI_STATUS, &pci_cmd_status);
|
|
|
|
netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
|
|
}
|
|
}
|
|
|
|
|
|
/* The interrupt handler does all of the Rx thread work and cleans up
|
|
after the Tx thread. */
|
|
static irqreturn_t netdrv_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_instance;
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
int boguscnt = max_interrupt_work;
|
|
void *ioaddr = tp->mmio_addr;
|
|
int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */
|
|
int handled = 0;
|
|
|
|
spin_lock(&tp->lock);
|
|
|
|
do {
|
|
status = NETDRV_R16(IntrStatus);
|
|
|
|
/* h/w no longer present(hotplug?) or major error, bail */
|
|
if (status == 0xFFFF)
|
|
break;
|
|
|
|
handled = 1;
|
|
/* Acknowledge all of the current interrupt sources ASAP */
|
|
NETDRV_W16_F(IntrStatus, status);
|
|
|
|
netdev_dbg(dev, "interrupt status=%#04x new intstat=%#04x\n",
|
|
status, NETDRV_R16(IntrStatus));
|
|
|
|
if ((status &
|
|
(PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
|
|
RxFIFOOver | TxErr | TxOK | RxErr | RxOK)) == 0)
|
|
break;
|
|
|
|
/* Check uncommon events with one test. */
|
|
if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
|
|
RxFIFOOver | TxErr | RxErr))
|
|
netdrv_weird_interrupt(dev, tp, ioaddr,
|
|
status, link_changed);
|
|
|
|
if (status & (RxOK | RxUnderrun | RxOverflow | RxFIFOOver)) /* Rx interrupt */
|
|
netdrv_rx_interrupt(dev, tp, ioaddr);
|
|
|
|
if (status & (TxOK | TxErr))
|
|
netdrv_tx_interrupt(dev, tp, ioaddr);
|
|
|
|
boguscnt--;
|
|
} while (boguscnt > 0);
|
|
|
|
if (boguscnt <= 0) {
|
|
netdev_warn(dev, "Too much work at interrupt, IntrStatus=%#04x\n",
|
|
status);
|
|
|
|
/* Clear all interrupt sources. */
|
|
NETDRV_W16(IntrStatus, 0xffff);
|
|
}
|
|
|
|
spin_unlock(&tp->lock);
|
|
|
|
netdev_dbg(dev, "exiting interrupt, intr_status=%#04x\n",
|
|
NETDRV_R16(IntrStatus));
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
|
|
static int netdrv_close(struct net_device *dev)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
void *ioaddr = tp->mmio_addr;
|
|
unsigned long flags;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
netdev_dbg(dev, "Shutting down ethercard, status was %#04x\n",
|
|
NETDRV_R16(IntrStatus));
|
|
|
|
del_timer_sync(&tp->timer);
|
|
|
|
spin_lock_irqsave(&tp->lock, flags);
|
|
|
|
/* Stop the chip's Tx and Rx DMA processes. */
|
|
NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
NETDRV_W16(IntrMask, 0x0000);
|
|
|
|
/* Update the error counts. */
|
|
dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
|
|
NETDRV_W32(RxMissed, 0);
|
|
|
|
spin_unlock_irqrestore(&tp->lock, flags);
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
netdrv_tx_clear(dev);
|
|
|
|
pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
|
|
tp->rx_ring, tp->rx_ring_dma);
|
|
pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
|
|
tp->tx_bufs, tp->tx_bufs_dma);
|
|
tp->rx_ring = NULL;
|
|
tp->tx_bufs = NULL;
|
|
|
|
/* Green! Put the chip in low-power mode. */
|
|
NETDRV_W8(Cfg9346, Cfg9346_Unlock);
|
|
NETDRV_W8(Config1, 0x03);
|
|
NETDRV_W8(Cfg9346, Cfg9346_Lock);
|
|
|
|
DPRINTK("EXIT\n");
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
struct mii_ioctl_data *data = if_mii(rq);
|
|
unsigned long flags;
|
|
int rc = 0;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
|
|
data->phy_id = tp->phys[0] & 0x3f;
|
|
/* Fall Through */
|
|
|
|
case SIOCGMIIREG: /* Read MII PHY register. */
|
|
spin_lock_irqsave(&tp->lock, flags);
|
|
data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
|
|
spin_unlock_irqrestore(&tp->lock, flags);
|
|
break;
|
|
|
|
case SIOCSMIIREG: /* Write MII PHY register. */
|
|
spin_lock_irqsave(&tp->lock, flags);
|
|
mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
|
|
spin_unlock_irqrestore(&tp->lock, flags);
|
|
break;
|
|
|
|
default:
|
|
rc = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
DPRINTK("EXIT, returning %d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor.
|
|
This routine is not state sensitive and need not be SMP locked. */
|
|
|
|
static void netdrv_set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
void *ioaddr = tp->mmio_addr;
|
|
u32 mc_filter[2]; /* Multicast hash filter */
|
|
int rx_mode;
|
|
u32 tmp;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
netdev_dbg(dev, "%s(%04x) done -- Rx config %08lx\n",
|
|
__func__, dev->flags, NETDRV_R32(RxConfig));
|
|
|
|
/* Note: do not reorder, GCC is clever about common statements. */
|
|
if (dev->flags & IFF_PROMISC) {
|
|
rx_mode =
|
|
AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
|
|
AcceptAllPhys;
|
|
mc_filter[1] = mc_filter[0] = 0xffffffff;
|
|
} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
|
|
(dev->flags & IFF_ALLMULTI)) {
|
|
/* Too many to filter perfectly -- accept all multicasts. */
|
|
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
|
|
mc_filter[1] = mc_filter[0] = 0xffffffff;
|
|
} else {
|
|
struct netdev_hw_addr *ha;
|
|
|
|
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
|
|
mc_filter[1] = mc_filter[0] = 0;
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
|
|
|
|
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
|
|
}
|
|
}
|
|
|
|
/* if called from irq handler, lock already acquired */
|
|
if (!in_irq())
|
|
spin_lock_irq(&tp->lock);
|
|
|
|
/* We can safely update without stopping the chip. */
|
|
tmp = netdrv_rx_config | rx_mode |
|
|
(NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
|
|
NETDRV_W32_F(RxConfig, tmp);
|
|
NETDRV_W32_F(MAR0 + 0, mc_filter[0]);
|
|
NETDRV_W32_F(MAR0 + 4, mc_filter[1]);
|
|
|
|
if (!in_irq())
|
|
spin_unlock_irq(&tp->lock);
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int netdrv_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct netdrv_private *tp = netdev_priv(dev);
|
|
void *ioaddr = tp->mmio_addr;
|
|
unsigned long flags;
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
netif_device_detach(dev);
|
|
|
|
spin_lock_irqsave(&tp->lock, flags);
|
|
|
|
/* Disable interrupts, stop Tx and Rx. */
|
|
NETDRV_W16(IntrMask, 0x0000);
|
|
NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
|
|
|
|
/* Update the error counts. */
|
|
dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
|
|
NETDRV_W32(RxMissed, 0);
|
|
|
|
spin_unlock_irqrestore(&tp->lock, flags);
|
|
|
|
pci_save_state(pdev);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int netdrv_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
/*struct netdrv_private *tp = netdev_priv(dev);*/
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
netif_device_attach(dev);
|
|
netdrv_hw_start(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
|
|
static struct pci_driver netdrv_pci_driver = {
|
|
.name = MODNAME,
|
|
.id_table = netdrv_pci_tbl,
|
|
.probe = netdrv_init_one,
|
|
.remove = __devexit_p(netdrv_remove_one),
|
|
#ifdef CONFIG_PM
|
|
.suspend = netdrv_suspend,
|
|
.resume = netdrv_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
|
|
static int __init netdrv_init_module(void)
|
|
{
|
|
/* when a module, this is printed whether or not devices are found in probe */
|
|
#ifdef MODULE
|
|
printk(version);
|
|
#endif
|
|
return pci_register_driver(&netdrv_pci_driver);
|
|
}
|
|
|
|
|
|
static void __exit netdrv_cleanup_module(void)
|
|
{
|
|
pci_unregister_driver(&netdrv_pci_driver);
|
|
}
|
|
|
|
|
|
module_init(netdrv_init_module);
|
|
module_exit(netdrv_cleanup_module);
|