leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2e4b88f739
linux/drivers/iio
History
Sven Van Asbroeck 2e4b88f739 iio: adc: xilinx: prevent touching unclocked h/w on remove 
In remove, the clock is disabled before canceling the
delayed work. This means that the delayed work may be
touching unclocked hardware.

Fix by disabling the clock after the delayed work is
fully canceled. This is consistent with the probe error
path order.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-03-16 15:49:56 +00:00
..
accel io: accel: kxcjk1013: restore the range after resume. 2019-03-09 17:30:14 +00:00
adc iio: adc: xilinx: prevent touching unclocked h/w on remove 2019-03-16 15:49:56 +00:00
afe iio: afe: rescale: new driver 2018-04-28 18:03:22 +01:00
amplifiers drivers: iio: Update MODULE AUTHOR email address 2018-08-19 17:23:39 +01:00
buffer
chemical iio:chemical:bme680: Fix SPI read interface 2019-03-09 17:27:36 +00:00
common iio: hid-sensor-hub: clean up indentation, remove extraneous tab 2018-11-25 14:03:59 +00:00
counter iio: 104-quad-8: Provide defines for magic numbers 2018-06-10 11:52:30 +01:00
dac iio: dac: mcp4725: add missing powerdown bits in store eeprom 2019-03-16 15:15:31 +00:00
dummy
frequency iio: ad9523: fix a missing check of return value 2019-01-05 16:10:50 +00:00
gyro iio: gyro: mpu3050: fix chip ID reading 2019-03-09 16:55:06 +00:00
health iio: health: max30102: Mark expected switch fall-throughs 2018-08-19 17:21:35 +01:00
humidity iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 2018-11-16 11:42:12 +00:00
imu iio:bmi160: use if (ret) instead of if (ret < 0) 2019-02-09 15:25:25 +00:00
light iio: light: add driver for MAX44009 2019-02-02 15:47:46 +00:00
magnetometer iio: magnetometer: mag3110: add vdd/vddio regulator operation support 2019-01-12 19:00:23 +00:00
multiplexer iio: multiplexer: switch to SPDX license identifier 2018-08-20 19:28:26 +01:00
orientation iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 2018-11-16 11:42:12 +00:00
potentiometer iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx 2018-11-25 12:35:26 +00:00
potentiostat iio: potentiostat: lmp91000: add LMP91002 support 2018-05-12 11:02:44 +01:00
pressure iio:st_pressure:initial lps22hh sensor support 2019-01-19 17:32:41 +00:00
proximity iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor. 2018-09-22 16:42:56 +01:00
resolver staging:iio:ad2s90: Move out of staging 2018-12-01 15:40:39 +00:00
temperature iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 2018-11-16 11:42:12 +00:00
trigger drivers: iio: Update MODULE AUTHOR email address 2018-08-19 17:23:39 +01:00
iio_core_trigger.h
iio_core.h
industrialio-buffer.c iio: Fix scan mask selection 2019-03-09 16:55:06 +00:00
industrialio-configfs.c
industrialio-core.c iio: add IIO_MASSCONCENTRATION channel type 2018-12-16 14:05:57 +00:00
industrialio-event.c
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c
industrialio-triggered-event.c
inkern.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
Kconfig staging: iio: ad2s1200: Move driver out of staging 2018-05-20 12:17:48 +01:00
Makefile staging: iio: ad2s1200: Move driver out of staging 2018-05-20 12:17:48 +01:00