forked from Minki/linux
814c5f1f52
Systems with Intel graphics controllers set aside memory exclusively for
gfx driver use. This memory is not always marked in the E820 as
reserved or as RAM, and so is subject to overlap from E820 manipulation
later in the boot process. On some systems, MMIO space is allocated on
top, despite the efforts of the "RAM buffer" approach, which simply
rounds memory boundaries up to 64M to try to catch space that may decode
as RAM and so is not suitable for MMIO.
v2: use read_pci_config for 32 bit reads instead of adding a new one
(Chris)
add gen6 stolen size function (Chris)
v3: use a function pointer (Chris)
drop gen2 bits (Daniel)
v4: call e820_sanitize_map after adding the region
v5: fixup comments (Peter)
simplify loop (Chris)
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66726
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66844
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
477 lines
12 KiB
C
477 lines
12 KiB
C
/* Various workarounds for chipset bugs.
|
|
This code runs very early and can't use the regular PCI subsystem
|
|
The entries are keyed to PCI bridges which usually identify chipsets
|
|
uniquely.
|
|
This is only for whole classes of chipsets with specific problems which
|
|
need early invasive action (e.g. before the timers are initialized).
|
|
Most PCI device specific workarounds can be done later and should be
|
|
in standard PCI quirks
|
|
Mainboard specific bugs should be handled by DMI entries.
|
|
CPU specific bugs in setup.c */
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <drm/i915_drm.h>
|
|
#include <asm/pci-direct.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/io_apic.h>
|
|
#include <asm/apic.h>
|
|
#include <asm/iommu.h>
|
|
#include <asm/gart.h>
|
|
#include <asm/irq_remapping.h>
|
|
|
|
static void __init fix_hypertransport_config(int num, int slot, int func)
|
|
{
|
|
u32 htcfg;
|
|
/*
|
|
* we found a hypertransport bus
|
|
* make sure that we are broadcasting
|
|
* interrupts to all cpus on the ht bus
|
|
* if we're using extended apic ids
|
|
*/
|
|
htcfg = read_pci_config(num, slot, func, 0x68);
|
|
if (htcfg & (1 << 18)) {
|
|
printk(KERN_INFO "Detected use of extended apic ids "
|
|
"on hypertransport bus\n");
|
|
if ((htcfg & (1 << 17)) == 0) {
|
|
printk(KERN_INFO "Enabling hypertransport extended "
|
|
"apic interrupt broadcast\n");
|
|
printk(KERN_INFO "Note this is a bios bug, "
|
|
"please contact your hw vendor\n");
|
|
htcfg |= (1 << 17);
|
|
write_pci_config(num, slot, func, 0x68, htcfg);
|
|
}
|
|
}
|
|
|
|
|
|
}
|
|
|
|
static void __init via_bugs(int num, int slot, int func)
|
|
{
|
|
#ifdef CONFIG_GART_IOMMU
|
|
if ((max_pfn > MAX_DMA32_PFN || force_iommu) &&
|
|
!gart_iommu_aperture_allowed) {
|
|
printk(KERN_INFO
|
|
"Looks like a VIA chipset. Disabling IOMMU."
|
|
" Override with iommu=allowed\n");
|
|
gart_iommu_aperture_disabled = 1;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
#ifdef CONFIG_X86_IO_APIC
|
|
|
|
static int __init nvidia_hpet_check(struct acpi_table_header *header)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_X86_IO_APIC */
|
|
#endif /* CONFIG_ACPI */
|
|
|
|
static void __init nvidia_bugs(int num, int slot, int func)
|
|
{
|
|
#ifdef CONFIG_ACPI
|
|
#ifdef CONFIG_X86_IO_APIC
|
|
/*
|
|
* All timer overrides on Nvidia are
|
|
* wrong unless HPET is enabled.
|
|
* Unfortunately that's not true on many Asus boards.
|
|
* We don't know yet how to detect this automatically, but
|
|
* at least allow a command line override.
|
|
*/
|
|
if (acpi_use_timer_override)
|
|
return;
|
|
|
|
if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
|
|
acpi_skip_timer_override = 1;
|
|
printk(KERN_INFO "Nvidia board "
|
|
"detected. Ignoring ACPI "
|
|
"timer override.\n");
|
|
printk(KERN_INFO "If you got timer trouble "
|
|
"try acpi_use_timer_override\n");
|
|
}
|
|
#endif
|
|
#endif
|
|
/* RED-PEN skip them on mptables too? */
|
|
|
|
}
|
|
|
|
#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
|
|
static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
|
|
{
|
|
u32 d;
|
|
u8 b;
|
|
|
|
b = read_pci_config_byte(num, slot, func, 0xac);
|
|
b &= ~(1<<5);
|
|
write_pci_config_byte(num, slot, func, 0xac, b);
|
|
|
|
d = read_pci_config(num, slot, func, 0x70);
|
|
d |= 1<<8;
|
|
write_pci_config(num, slot, func, 0x70, d);
|
|
|
|
d = read_pci_config(num, slot, func, 0x8);
|
|
d &= 0xff;
|
|
return d;
|
|
}
|
|
|
|
static void __init ati_bugs(int num, int slot, int func)
|
|
{
|
|
u32 d;
|
|
u8 b;
|
|
|
|
if (acpi_use_timer_override)
|
|
return;
|
|
|
|
d = ati_ixp4x0_rev(num, slot, func);
|
|
if (d < 0x82)
|
|
acpi_skip_timer_override = 1;
|
|
else {
|
|
/* check for IRQ0 interrupt swap */
|
|
outb(0x72, 0xcd6); b = inb(0xcd7);
|
|
if (!(b & 0x2))
|
|
acpi_skip_timer_override = 1;
|
|
}
|
|
|
|
if (acpi_skip_timer_override) {
|
|
printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
|
|
printk(KERN_INFO "Ignoring ACPI timer override.\n");
|
|
printk(KERN_INFO "If you got timer trouble "
|
|
"try acpi_use_timer_override\n");
|
|
}
|
|
}
|
|
|
|
static u32 __init ati_sbx00_rev(int num, int slot, int func)
|
|
{
|
|
u32 d;
|
|
|
|
d = read_pci_config(num, slot, func, 0x8);
|
|
d &= 0xff;
|
|
|
|
return d;
|
|
}
|
|
|
|
static void __init ati_bugs_contd(int num, int slot, int func)
|
|
{
|
|
u32 d, rev;
|
|
|
|
rev = ati_sbx00_rev(num, slot, func);
|
|
if (rev >= 0x40)
|
|
acpi_fix_pin2_polarity = 1;
|
|
|
|
/*
|
|
* SB600: revisions 0x11, 0x12, 0x13, 0x14, ...
|
|
* SB700: revisions 0x39, 0x3a, ...
|
|
* SB800: revisions 0x40, 0x41, ...
|
|
*/
|
|
if (rev >= 0x39)
|
|
return;
|
|
|
|
if (acpi_use_timer_override)
|
|
return;
|
|
|
|
/* check for IRQ0 interrupt swap */
|
|
d = read_pci_config(num, slot, func, 0x64);
|
|
if (!(d & (1<<14)))
|
|
acpi_skip_timer_override = 1;
|
|
|
|
if (acpi_skip_timer_override) {
|
|
printk(KERN_INFO "SB600 revision 0x%x\n", rev);
|
|
printk(KERN_INFO "Ignoring ACPI timer override.\n");
|
|
printk(KERN_INFO "If you got timer trouble "
|
|
"try acpi_use_timer_override\n");
|
|
}
|
|
}
|
|
#else
|
|
static void __init ati_bugs(int num, int slot, int func)
|
|
{
|
|
}
|
|
|
|
static void __init ati_bugs_contd(int num, int slot, int func)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static void __init intel_remapping_check(int num, int slot, int func)
|
|
{
|
|
u8 revision;
|
|
u16 device;
|
|
|
|
device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
|
|
revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID);
|
|
|
|
/*
|
|
* Revision 13 of all triggering devices id in this quirk have
|
|
* a problem draining interrupts when irq remapping is enabled,
|
|
* and should be flagged as broken. Additionally revisions 0x12
|
|
* and 0x22 of device id 0x3405 has this problem.
|
|
*/
|
|
if (revision == 0x13)
|
|
set_irq_remapping_broken();
|
|
else if ((device == 0x3405) &&
|
|
((revision == 0x12) ||
|
|
(revision == 0x22)))
|
|
set_irq_remapping_broken();
|
|
|
|
}
|
|
|
|
/*
|
|
* Systems with Intel graphics controllers set aside memory exclusively
|
|
* for gfx driver use. This memory is not marked in the E820 as reserved
|
|
* or as RAM, and so is subject to overlap from E820 manipulation later
|
|
* in the boot process. On some systems, MMIO space is allocated on top,
|
|
* despite the efforts of the "RAM buffer" approach, which simply rounds
|
|
* memory boundaries up to 64M to try to catch space that may decode
|
|
* as RAM and so is not suitable for MMIO.
|
|
*
|
|
* And yes, so far on current devices the base addr is always under 4G.
|
|
*/
|
|
static u32 __init intel_stolen_base(int num, int slot, int func)
|
|
{
|
|
u32 base;
|
|
|
|
/*
|
|
* For the PCI IDs in this quirk, the stolen base is always
|
|
* in 0x5c, aka the BDSM register (yes that's really what
|
|
* it's called).
|
|
*/
|
|
base = read_pci_config(num, slot, func, 0x5c);
|
|
base &= ~((1<<20) - 1);
|
|
|
|
return base;
|
|
}
|
|
|
|
#define KB(x) ((x) * 1024)
|
|
#define MB(x) (KB (KB (x)))
|
|
#define GB(x) (MB (KB (x)))
|
|
|
|
static size_t __init gen3_stolen_size(int num, int slot, int func)
|
|
{
|
|
size_t stolen_size;
|
|
u16 gmch_ctrl;
|
|
|
|
gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL);
|
|
|
|
switch (gmch_ctrl & I855_GMCH_GMS_MASK) {
|
|
case I855_GMCH_GMS_STOLEN_1M:
|
|
stolen_size = MB(1);
|
|
break;
|
|
case I855_GMCH_GMS_STOLEN_4M:
|
|
stolen_size = MB(4);
|
|
break;
|
|
case I855_GMCH_GMS_STOLEN_8M:
|
|
stolen_size = MB(8);
|
|
break;
|
|
case I855_GMCH_GMS_STOLEN_16M:
|
|
stolen_size = MB(16);
|
|
break;
|
|
case I855_GMCH_GMS_STOLEN_32M:
|
|
stolen_size = MB(32);
|
|
break;
|
|
case I915_GMCH_GMS_STOLEN_48M:
|
|
stolen_size = MB(48);
|
|
break;
|
|
case I915_GMCH_GMS_STOLEN_64M:
|
|
stolen_size = MB(64);
|
|
break;
|
|
case G33_GMCH_GMS_STOLEN_128M:
|
|
stolen_size = MB(128);
|
|
break;
|
|
case G33_GMCH_GMS_STOLEN_256M:
|
|
stolen_size = MB(256);
|
|
break;
|
|
case INTEL_GMCH_GMS_STOLEN_96M:
|
|
stolen_size = MB(96);
|
|
break;
|
|
case INTEL_GMCH_GMS_STOLEN_160M:
|
|
stolen_size = MB(160);
|
|
break;
|
|
case INTEL_GMCH_GMS_STOLEN_224M:
|
|
stolen_size = MB(224);
|
|
break;
|
|
case INTEL_GMCH_GMS_STOLEN_352M:
|
|
stolen_size = MB(352);
|
|
break;
|
|
default:
|
|
stolen_size = 0;
|
|
break;
|
|
}
|
|
|
|
return stolen_size;
|
|
}
|
|
|
|
static size_t __init gen6_stolen_size(int num, int slot, int func)
|
|
{
|
|
u16 gmch_ctrl;
|
|
|
|
gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
|
|
gmch_ctrl >>= SNB_GMCH_GMS_SHIFT;
|
|
gmch_ctrl &= SNB_GMCH_GMS_MASK;
|
|
|
|
return gmch_ctrl << 25; /* 32 MB units */
|
|
}
|
|
|
|
typedef size_t (*stolen_size_fn)(int num, int slot, int func);
|
|
|
|
static struct pci_device_id intel_stolen_ids[] __initdata = {
|
|
INTEL_I915G_IDS(gen3_stolen_size),
|
|
INTEL_I915GM_IDS(gen3_stolen_size),
|
|
INTEL_I945G_IDS(gen3_stolen_size),
|
|
INTEL_I945GM_IDS(gen3_stolen_size),
|
|
INTEL_VLV_M_IDS(gen3_stolen_size),
|
|
INTEL_VLV_D_IDS(gen3_stolen_size),
|
|
INTEL_PINEVIEW_IDS(gen3_stolen_size),
|
|
INTEL_I965G_IDS(gen3_stolen_size),
|
|
INTEL_G33_IDS(gen3_stolen_size),
|
|
INTEL_I965GM_IDS(gen3_stolen_size),
|
|
INTEL_GM45_IDS(gen3_stolen_size),
|
|
INTEL_G45_IDS(gen3_stolen_size),
|
|
INTEL_IRONLAKE_D_IDS(gen3_stolen_size),
|
|
INTEL_IRONLAKE_M_IDS(gen3_stolen_size),
|
|
INTEL_SNB_D_IDS(gen6_stolen_size),
|
|
INTEL_SNB_M_IDS(gen6_stolen_size),
|
|
INTEL_IVB_M_IDS(gen6_stolen_size),
|
|
INTEL_IVB_D_IDS(gen6_stolen_size),
|
|
INTEL_HSW_D_IDS(gen6_stolen_size),
|
|
INTEL_HSW_M_IDS(gen6_stolen_size),
|
|
};
|
|
|
|
static void __init intel_graphics_stolen(int num, int slot, int func)
|
|
{
|
|
size_t size;
|
|
int i;
|
|
u32 start;
|
|
u16 device, subvendor, subdevice;
|
|
|
|
device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
|
|
subvendor = read_pci_config_16(num, slot, func,
|
|
PCI_SUBSYSTEM_VENDOR_ID);
|
|
subdevice = read_pci_config_16(num, slot, func, PCI_SUBSYSTEM_ID);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(intel_stolen_ids); i++) {
|
|
if (intel_stolen_ids[i].device == device) {
|
|
stolen_size_fn stolen_size =
|
|
(stolen_size_fn)intel_stolen_ids[i].driver_data;
|
|
size = stolen_size(num, slot, func);
|
|
start = intel_stolen_base(num, slot, func);
|
|
if (size && start) {
|
|
/* Mark this space as reserved */
|
|
e820_add_region(start, size, E820_RESERVED);
|
|
sanitize_e820_map(e820.map,
|
|
ARRAY_SIZE(e820.map),
|
|
&e820.nr_map);
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define QFLAG_APPLY_ONCE 0x1
|
|
#define QFLAG_APPLIED 0x2
|
|
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
|
|
struct chipset {
|
|
u32 vendor;
|
|
u32 device;
|
|
u32 class;
|
|
u32 class_mask;
|
|
u32 flags;
|
|
void (*f)(int num, int slot, int func);
|
|
};
|
|
|
|
/*
|
|
* Only works for devices on the root bus. If you add any devices
|
|
* not on bus 0 readd another loop level in early_quirks(). But
|
|
* be careful because at least the Nvidia quirk here relies on
|
|
* only matching on bus 0.
|
|
*/
|
|
static struct chipset early_qrk[] __initdata = {
|
|
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
|
|
PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
|
|
{ PCI_VENDOR_ID_VIA, PCI_ANY_ID,
|
|
PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
|
|
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
|
|
PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
|
|
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
|
|
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
|
|
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
|
|
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
|
|
{ PCI_VENDOR_ID_INTEL, 0x3403, PCI_CLASS_BRIDGE_HOST,
|
|
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
|
|
{ PCI_VENDOR_ID_INTEL, 0x3405, PCI_CLASS_BRIDGE_HOST,
|
|
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
|
|
{ PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
|
|
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID,
|
|
QFLAG_APPLY_ONCE, intel_graphics_stolen },
|
|
{}
|
|
};
|
|
|
|
/**
|
|
* check_dev_quirk - apply early quirks to a given PCI device
|
|
* @num: bus number
|
|
* @slot: slot number
|
|
* @func: PCI function
|
|
*
|
|
* Check the vendor & device ID against the early quirks table.
|
|
*
|
|
* If the device is single function, let early_quirks() know so we don't
|
|
* poke at this device again.
|
|
*/
|
|
static int __init check_dev_quirk(int num, int slot, int func)
|
|
{
|
|
u16 class;
|
|
u16 vendor;
|
|
u16 device;
|
|
u8 type;
|
|
int i;
|
|
|
|
class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
|
|
|
|
if (class == 0xffff)
|
|
return -1; /* no class, treat as single function */
|
|
|
|
vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
|
|
|
|
device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
|
|
|
|
for (i = 0; early_qrk[i].f != NULL; i++) {
|
|
if (((early_qrk[i].vendor == PCI_ANY_ID) ||
|
|
(early_qrk[i].vendor == vendor)) &&
|
|
((early_qrk[i].device == PCI_ANY_ID) ||
|
|
(early_qrk[i].device == device)) &&
|
|
(!((early_qrk[i].class ^ class) &
|
|
early_qrk[i].class_mask))) {
|
|
if ((early_qrk[i].flags &
|
|
QFLAG_DONE) != QFLAG_DONE)
|
|
early_qrk[i].f(num, slot, func);
|
|
early_qrk[i].flags |= QFLAG_APPLIED;
|
|
}
|
|
}
|
|
|
|
type = read_pci_config_byte(num, slot, func,
|
|
PCI_HEADER_TYPE);
|
|
if (!(type & 0x80))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __init early_quirks(void)
|
|
{
|
|
int slot, func;
|
|
|
|
if (!early_pci_allowed())
|
|
return;
|
|
|
|
/* Poor man's PCI discovery */
|
|
/* Only scan the root bus */
|
|
for (slot = 0; slot < 32; slot++)
|
|
for (func = 0; func < 8; func++) {
|
|
/* Only probe function 0 on single fn devices */
|
|
if (check_dev_quirk(0, slot, func))
|
|
break;
|
|
}
|
|
}
|