forked from Minki/linux
63f8f3badf
The mode and ajusted_mode passed to the bridge .mode_set() operation should never be modified by the bridge (and are not in any of the existing bridge drivers). Make them const to make this clear. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
1077 lines
29 KiB
C
1077 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
|
|
* Author:
|
|
* Chris Zhong <zyw@rock-chips.com>
|
|
* Nickey Yang <nickey.yang@rock-chips.com>
|
|
*/
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/bridge/dw_mipi_dsi.h>
|
|
#include <drm/drm_of.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <video/mipi_display.h>
|
|
|
|
#include "rockchip_drm_drv.h"
|
|
#include "rockchip_drm_vop.h"
|
|
|
|
#define DSI_PHY_RSTZ 0xa0
|
|
#define PHY_DISFORCEPLL 0
|
|
#define PHY_ENFORCEPLL BIT(3)
|
|
#define PHY_DISABLECLK 0
|
|
#define PHY_ENABLECLK BIT(2)
|
|
#define PHY_RSTZ 0
|
|
#define PHY_UNRSTZ BIT(1)
|
|
#define PHY_SHUTDOWNZ 0
|
|
#define PHY_UNSHUTDOWNZ BIT(0)
|
|
|
|
#define DSI_PHY_IF_CFG 0xa4
|
|
#define N_LANES(n) ((((n) - 1) & 0x3) << 0)
|
|
#define PHY_STOP_WAIT_TIME(cycle) (((cycle) & 0xff) << 8)
|
|
|
|
#define DSI_PHY_STATUS 0xb0
|
|
#define LOCK BIT(0)
|
|
#define STOP_STATE_CLK_LANE BIT(2)
|
|
|
|
#define DSI_PHY_TST_CTRL0 0xb4
|
|
#define PHY_TESTCLK BIT(1)
|
|
#define PHY_UNTESTCLK 0
|
|
#define PHY_TESTCLR BIT(0)
|
|
#define PHY_UNTESTCLR 0
|
|
|
|
#define DSI_PHY_TST_CTRL1 0xb8
|
|
#define PHY_TESTEN BIT(16)
|
|
#define PHY_UNTESTEN 0
|
|
#define PHY_TESTDOUT(n) (((n) & 0xff) << 8)
|
|
#define PHY_TESTDIN(n) (((n) & 0xff) << 0)
|
|
|
|
#define DSI_INT_ST0 0xbc
|
|
#define DSI_INT_ST1 0xc0
|
|
#define DSI_INT_MSK0 0xc4
|
|
#define DSI_INT_MSK1 0xc8
|
|
|
|
#define PHY_STATUS_TIMEOUT_US 10000
|
|
#define CMD_PKT_STATUS_TIMEOUT_US 20000
|
|
|
|
#define BYPASS_VCO_RANGE BIT(7)
|
|
#define VCO_RANGE_CON_SEL(val) (((val) & 0x7) << 3)
|
|
#define VCO_IN_CAP_CON_DEFAULT (0x0 << 1)
|
|
#define VCO_IN_CAP_CON_LOW (0x1 << 1)
|
|
#define VCO_IN_CAP_CON_HIGH (0x2 << 1)
|
|
#define REF_BIAS_CUR_SEL BIT(0)
|
|
|
|
#define CP_CURRENT_3UA 0x1
|
|
#define CP_CURRENT_4_5UA 0x2
|
|
#define CP_CURRENT_7_5UA 0x6
|
|
#define CP_CURRENT_6UA 0x9
|
|
#define CP_CURRENT_12UA 0xb
|
|
#define CP_CURRENT_SEL(val) ((val) & 0xf)
|
|
#define CP_PROGRAM_EN BIT(7)
|
|
|
|
#define LPF_RESISTORS_15_5KOHM 0x1
|
|
#define LPF_RESISTORS_13KOHM 0x2
|
|
#define LPF_RESISTORS_11_5KOHM 0x4
|
|
#define LPF_RESISTORS_10_5KOHM 0x8
|
|
#define LPF_RESISTORS_8KOHM 0x10
|
|
#define LPF_PROGRAM_EN BIT(6)
|
|
#define LPF_RESISTORS_SEL(val) ((val) & 0x3f)
|
|
|
|
#define HSFREQRANGE_SEL(val) (((val) & 0x3f) << 1)
|
|
|
|
#define INPUT_DIVIDER(val) (((val) - 1) & 0x7f)
|
|
#define LOW_PROGRAM_EN 0
|
|
#define HIGH_PROGRAM_EN BIT(7)
|
|
#define LOOP_DIV_LOW_SEL(val) (((val) - 1) & 0x1f)
|
|
#define LOOP_DIV_HIGH_SEL(val) ((((val) - 1) >> 5) & 0xf)
|
|
#define PLL_LOOP_DIV_EN BIT(5)
|
|
#define PLL_INPUT_DIV_EN BIT(4)
|
|
|
|
#define POWER_CONTROL BIT(6)
|
|
#define INTERNAL_REG_CURRENT BIT(3)
|
|
#define BIAS_BLOCK_ON BIT(2)
|
|
#define BANDGAP_ON BIT(0)
|
|
|
|
#define TER_RESISTOR_HIGH BIT(7)
|
|
#define TER_RESISTOR_LOW 0
|
|
#define LEVEL_SHIFTERS_ON BIT(6)
|
|
#define TER_CAL_DONE BIT(5)
|
|
#define SETRD_MAX (0x7 << 2)
|
|
#define POWER_MANAGE BIT(1)
|
|
#define TER_RESISTORS_ON BIT(0)
|
|
|
|
#define BIASEXTR_SEL(val) ((val) & 0x7)
|
|
#define BANDGAP_SEL(val) ((val) & 0x7)
|
|
#define TLP_PROGRAM_EN BIT(7)
|
|
#define THS_PRE_PROGRAM_EN BIT(7)
|
|
#define THS_ZERO_PROGRAM_EN BIT(6)
|
|
|
|
#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL 0x10
|
|
#define PLL_CP_CONTROL_PLL_LOCK_BYPASS 0x11
|
|
#define PLL_LPF_AND_CP_CONTROL 0x12
|
|
#define PLL_INPUT_DIVIDER_RATIO 0x17
|
|
#define PLL_LOOP_DIVIDER_RATIO 0x18
|
|
#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL 0x19
|
|
#define BANDGAP_AND_BIAS_CONTROL 0x20
|
|
#define TERMINATION_RESISTER_CONTROL 0x21
|
|
#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY 0x22
|
|
#define HS_RX_CONTROL_OF_LANE_0 0x44
|
|
#define HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL 0x60
|
|
#define HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL 0x61
|
|
#define HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL 0x62
|
|
#define HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL 0x63
|
|
#define HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL 0x64
|
|
#define HS_TX_CLOCK_LANE_POST_TIME_CONTROL 0x65
|
|
#define HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL 0x70
|
|
#define HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL 0x71
|
|
#define HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL 0x72
|
|
#define HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL 0x73
|
|
#define HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL 0x74
|
|
|
|
#define DW_MIPI_NEEDS_PHY_CFG_CLK BIT(0)
|
|
#define DW_MIPI_NEEDS_GRF_CLK BIT(1)
|
|
|
|
#define RK3288_GRF_SOC_CON6 0x025c
|
|
#define RK3288_DSI0_LCDC_SEL BIT(6)
|
|
#define RK3288_DSI1_LCDC_SEL BIT(9)
|
|
|
|
#define RK3399_GRF_SOC_CON20 0x6250
|
|
#define RK3399_DSI0_LCDC_SEL BIT(0)
|
|
#define RK3399_DSI1_LCDC_SEL BIT(4)
|
|
|
|
#define RK3399_GRF_SOC_CON22 0x6258
|
|
#define RK3399_DSI0_TURNREQUEST (0xf << 12)
|
|
#define RK3399_DSI0_TURNDISABLE (0xf << 8)
|
|
#define RK3399_DSI0_FORCETXSTOPMODE (0xf << 4)
|
|
#define RK3399_DSI0_FORCERXMODE (0xf << 0)
|
|
|
|
#define RK3399_GRF_SOC_CON23 0x625c
|
|
#define RK3399_DSI1_TURNDISABLE (0xf << 12)
|
|
#define RK3399_DSI1_FORCETXSTOPMODE (0xf << 8)
|
|
#define RK3399_DSI1_FORCERXMODE (0xf << 4)
|
|
#define RK3399_DSI1_ENABLE (0xf << 0)
|
|
|
|
#define RK3399_GRF_SOC_CON24 0x6260
|
|
#define RK3399_TXRX_MASTERSLAVEZ BIT(7)
|
|
#define RK3399_TXRX_ENABLECLK BIT(6)
|
|
#define RK3399_TXRX_BASEDIR BIT(5)
|
|
|
|
#define HIWORD_UPDATE(val, mask) (val | (mask) << 16)
|
|
|
|
#define to_dsi(nm) container_of(nm, struct dw_mipi_dsi_rockchip, nm)
|
|
|
|
enum {
|
|
BANDGAP_97_07,
|
|
BANDGAP_98_05,
|
|
BANDGAP_99_02,
|
|
BANDGAP_100_00,
|
|
BANDGAP_93_17,
|
|
BANDGAP_94_15,
|
|
BANDGAP_95_12,
|
|
BANDGAP_96_10,
|
|
};
|
|
|
|
enum {
|
|
BIASEXTR_87_1,
|
|
BIASEXTR_91_5,
|
|
BIASEXTR_95_9,
|
|
BIASEXTR_100,
|
|
BIASEXTR_105_94,
|
|
BIASEXTR_111_88,
|
|
BIASEXTR_118_8,
|
|
BIASEXTR_127_7,
|
|
};
|
|
|
|
struct rockchip_dw_dsi_chip_data {
|
|
u32 reg;
|
|
|
|
u32 lcdsel_grf_reg;
|
|
u32 lcdsel_big;
|
|
u32 lcdsel_lit;
|
|
|
|
u32 enable_grf_reg;
|
|
u32 enable;
|
|
|
|
u32 lanecfg1_grf_reg;
|
|
u32 lanecfg1;
|
|
u32 lanecfg2_grf_reg;
|
|
u32 lanecfg2;
|
|
|
|
unsigned int flags;
|
|
unsigned int max_data_lanes;
|
|
};
|
|
|
|
struct dw_mipi_dsi_rockchip {
|
|
struct device *dev;
|
|
struct drm_encoder encoder;
|
|
void __iomem *base;
|
|
|
|
struct regmap *grf_regmap;
|
|
struct clk *pllref_clk;
|
|
struct clk *grf_clk;
|
|
struct clk *phy_cfg_clk;
|
|
|
|
/* dual-channel */
|
|
bool is_slave;
|
|
struct dw_mipi_dsi_rockchip *slave;
|
|
|
|
unsigned int lane_mbps; /* per lane */
|
|
u16 input_div;
|
|
u16 feedback_div;
|
|
u32 format;
|
|
|
|
struct dw_mipi_dsi *dmd;
|
|
const struct rockchip_dw_dsi_chip_data *cdata;
|
|
struct dw_mipi_dsi_plat_data pdata;
|
|
int devcnt;
|
|
};
|
|
|
|
struct dphy_pll_parameter_map {
|
|
unsigned int max_mbps;
|
|
u8 hsfreqrange;
|
|
u8 icpctrl;
|
|
u8 lpfctrl;
|
|
};
|
|
|
|
/* The table is based on 27MHz DPHY pll reference clock. */
|
|
static const struct dphy_pll_parameter_map dppa_map[] = {
|
|
{ 89, 0x00, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM },
|
|
{ 99, 0x10, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM },
|
|
{ 109, 0x20, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM },
|
|
{ 129, 0x01, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
|
|
{ 139, 0x11, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
|
|
{ 149, 0x21, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
|
|
{ 169, 0x02, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM },
|
|
{ 179, 0x12, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM },
|
|
{ 199, 0x22, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM },
|
|
{ 219, 0x03, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM },
|
|
{ 239, 0x13, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM },
|
|
{ 249, 0x23, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM },
|
|
{ 269, 0x04, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 299, 0x14, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 329, 0x05, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
|
|
{ 359, 0x15, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
|
|
{ 399, 0x25, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
|
|
{ 449, 0x06, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 499, 0x16, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 549, 0x07, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM },
|
|
{ 599, 0x17, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM },
|
|
{ 649, 0x08, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 699, 0x18, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 749, 0x09, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 799, 0x19, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 849, 0x29, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 899, 0x39, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
|
|
{ 949, 0x0a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM },
|
|
{ 999, 0x1a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM },
|
|
{1049, 0x2a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM },
|
|
{1099, 0x3a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM },
|
|
{1149, 0x0b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
|
|
{1199, 0x1b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
|
|
{1249, 0x2b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
|
|
{1299, 0x3b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
|
|
{1349, 0x0c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
|
|
{1399, 0x1c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
|
|
{1449, 0x2c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
|
|
{1500, 0x3c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM }
|
|
};
|
|
|
|
static int max_mbps_to_parameter(unsigned int max_mbps)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dppa_map); i++)
|
|
if (dppa_map[i].max_mbps >= max_mbps)
|
|
return i;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline void dsi_write(struct dw_mipi_dsi_rockchip *dsi, u32 reg, u32 val)
|
|
{
|
|
writel(val, dsi->base + reg);
|
|
}
|
|
|
|
static inline u32 dsi_read(struct dw_mipi_dsi_rockchip *dsi, u32 reg)
|
|
{
|
|
return readl(dsi->base + reg);
|
|
}
|
|
|
|
static inline void dsi_set(struct dw_mipi_dsi_rockchip *dsi, u32 reg, u32 mask)
|
|
{
|
|
dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
|
|
}
|
|
|
|
static inline void dsi_update_bits(struct dw_mipi_dsi_rockchip *dsi, u32 reg,
|
|
u32 mask, u32 val)
|
|
{
|
|
dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
|
|
}
|
|
|
|
static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi_rockchip *dsi,
|
|
u8 test_code,
|
|
u8 test_data)
|
|
{
|
|
/*
|
|
* With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
|
|
* is latched internally as the current test code. Test data is
|
|
* programmed internally by rising edge on TESTCLK.
|
|
*/
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
|
|
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
|
|
PHY_TESTDIN(test_code));
|
|
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
|
|
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
|
|
PHY_TESTDIN(test_data));
|
|
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
|
|
}
|
|
|
|
/**
|
|
* ns2bc - Nanoseconds to byte clock cycles
|
|
*/
|
|
static inline unsigned int ns2bc(struct dw_mipi_dsi_rockchip *dsi, int ns)
|
|
{
|
|
return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000);
|
|
}
|
|
|
|
/**
|
|
* ns2ui - Nanoseconds to UI time periods
|
|
*/
|
|
static inline unsigned int ns2ui(struct dw_mipi_dsi_rockchip *dsi, int ns)
|
|
{
|
|
return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000);
|
|
}
|
|
|
|
static int dw_mipi_dsi_phy_init(void *priv_data)
|
|
{
|
|
struct dw_mipi_dsi_rockchip *dsi = priv_data;
|
|
int ret, i, vco;
|
|
|
|
/*
|
|
* Get vco from frequency(lane_mbps)
|
|
* vco frequency table
|
|
* 000 - between 80 and 200 MHz
|
|
* 001 - between 200 and 300 MHz
|
|
* 010 - between 300 and 500 MHz
|
|
* 011 - between 500 and 700 MHz
|
|
* 100 - between 700 and 900 MHz
|
|
* 101 - between 900 and 1100 MHz
|
|
* 110 - between 1100 and 1300 MHz
|
|
* 111 - between 1300 and 1500 MHz
|
|
*/
|
|
vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
|
|
|
|
i = max_mbps_to_parameter(dsi->lane_mbps);
|
|
if (i < 0) {
|
|
DRM_DEV_ERROR(dsi->dev,
|
|
"failed to get parameter for %dmbps clock\n",
|
|
dsi->lane_mbps);
|
|
return i;
|
|
}
|
|
|
|
ret = clk_prepare_enable(dsi->phy_cfg_clk);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n");
|
|
return ret;
|
|
}
|
|
|
|
dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL,
|
|
BYPASS_VCO_RANGE |
|
|
VCO_RANGE_CON_SEL(vco) |
|
|
VCO_IN_CAP_CON_LOW |
|
|
REF_BIAS_CUR_SEL);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS,
|
|
CP_CURRENT_SEL(dppa_map[i].icpctrl));
|
|
dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL,
|
|
CP_PROGRAM_EN | LPF_PROGRAM_EN |
|
|
LPF_RESISTORS_SEL(dppa_map[i].lpfctrl));
|
|
|
|
dw_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0,
|
|
HSFREQRANGE_SEL(dppa_map[i].hsfreqrange));
|
|
|
|
dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO,
|
|
INPUT_DIVIDER(dsi->input_div));
|
|
dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
|
|
LOOP_DIV_LOW_SEL(dsi->feedback_div) |
|
|
LOW_PROGRAM_EN);
|
|
/*
|
|
* We need set PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL immediately
|
|
* to make the configured LSB effective according to IP simulation
|
|
* and lab test results.
|
|
* Only in this way can we get correct mipi phy pll frequency.
|
|
*/
|
|
dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
|
|
PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
|
|
dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
|
|
LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
|
|
HIGH_PROGRAM_EN);
|
|
dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
|
|
PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
|
|
LOW_PROGRAM_EN | BIASEXTR_SEL(BIASEXTR_127_7));
|
|
dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
|
|
HIGH_PROGRAM_EN | BANDGAP_SEL(BANDGAP_96_10));
|
|
|
|
dw_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL,
|
|
POWER_CONTROL | INTERNAL_REG_CURRENT |
|
|
BIAS_BLOCK_ON | BANDGAP_ON);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
|
|
TER_RESISTOR_LOW | TER_CAL_DONE |
|
|
SETRD_MAX | TER_RESISTORS_ON);
|
|
dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
|
|
TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
|
|
SETRD_MAX | POWER_MANAGE |
|
|
TER_RESISTORS_ON);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL,
|
|
TLP_PROGRAM_EN | ns2bc(dsi, 500));
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL,
|
|
THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL,
|
|
THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL,
|
|
THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL,
|
|
BIT(5) | ns2bc(dsi, 100));
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_POST_TIME_CONTROL,
|
|
BIT(5) | (ns2bc(dsi, 60) + 7));
|
|
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL,
|
|
TLP_PROGRAM_EN | ns2bc(dsi, 500));
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL,
|
|
THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 20));
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL,
|
|
THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL,
|
|
THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
|
|
dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL,
|
|
BIT(5) | ns2bc(dsi, 100));
|
|
|
|
clk_disable_unprepare(dsi->phy_cfg_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
|
|
unsigned long mode_flags, u32 lanes, u32 format,
|
|
unsigned int *lane_mbps)
|
|
{
|
|
struct dw_mipi_dsi_rockchip *dsi = priv_data;
|
|
int bpp;
|
|
unsigned long mpclk, tmp;
|
|
unsigned int target_mbps = 1000;
|
|
unsigned int max_mbps = dppa_map[ARRAY_SIZE(dppa_map) - 1].max_mbps;
|
|
unsigned long best_freq = 0;
|
|
unsigned long fvco_min, fvco_max, fin, fout;
|
|
unsigned int min_prediv, max_prediv;
|
|
unsigned int _prediv, uninitialized_var(best_prediv);
|
|
unsigned long _fbdiv, uninitialized_var(best_fbdiv);
|
|
unsigned long min_delta = ULONG_MAX;
|
|
|
|
dsi->format = format;
|
|
bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
|
|
if (bpp < 0) {
|
|
DRM_DEV_ERROR(dsi->dev,
|
|
"failed to get bpp for pixel format %d\n",
|
|
dsi->format);
|
|
return bpp;
|
|
}
|
|
|
|
mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
|
|
if (mpclk) {
|
|
/* take 1 / 0.8, since mbps must big than bandwidth of RGB */
|
|
tmp = mpclk * (bpp / lanes) * 10 / 8;
|
|
if (tmp < max_mbps)
|
|
target_mbps = tmp;
|
|
else
|
|
DRM_DEV_ERROR(dsi->dev,
|
|
"DPHY clock frequency is out of range\n");
|
|
}
|
|
|
|
fin = clk_get_rate(dsi->pllref_clk);
|
|
fout = target_mbps * USEC_PER_SEC;
|
|
|
|
/* constraint: 5Mhz <= Fref / N <= 40MHz */
|
|
min_prediv = DIV_ROUND_UP(fin, 40 * USEC_PER_SEC);
|
|
max_prediv = fin / (5 * USEC_PER_SEC);
|
|
|
|
/* constraint: 80MHz <= Fvco <= 1500Mhz */
|
|
fvco_min = 80 * USEC_PER_SEC;
|
|
fvco_max = 1500 * USEC_PER_SEC;
|
|
|
|
for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) {
|
|
u64 tmp;
|
|
u32 delta;
|
|
/* Fvco = Fref * M / N */
|
|
tmp = (u64)fout * _prediv;
|
|
do_div(tmp, fin);
|
|
_fbdiv = tmp;
|
|
/*
|
|
* Due to the use of a "by 2 pre-scaler," the range of the
|
|
* feedback multiplication value M is limited to even division
|
|
* numbers, and m must be greater than 6, not bigger than 512.
|
|
*/
|
|
if (_fbdiv < 6 || _fbdiv > 512)
|
|
continue;
|
|
|
|
_fbdiv += _fbdiv % 2;
|
|
|
|
tmp = (u64)_fbdiv * fin;
|
|
do_div(tmp, _prediv);
|
|
if (tmp < fvco_min || tmp > fvco_max)
|
|
continue;
|
|
|
|
delta = abs(fout - tmp);
|
|
if (delta < min_delta) {
|
|
best_prediv = _prediv;
|
|
best_fbdiv = _fbdiv;
|
|
min_delta = delta;
|
|
best_freq = tmp;
|
|
}
|
|
}
|
|
|
|
if (best_freq) {
|
|
dsi->lane_mbps = DIV_ROUND_UP(best_freq, USEC_PER_SEC);
|
|
*lane_mbps = dsi->lane_mbps;
|
|
dsi->input_div = best_prediv;
|
|
dsi->feedback_div = best_fbdiv;
|
|
} else {
|
|
DRM_DEV_ERROR(dsi->dev, "Can not find best_freq for DPHY\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_rockchip_phy_ops = {
|
|
.init = dw_mipi_dsi_phy_init,
|
|
.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
|
|
};
|
|
|
|
static void dw_mipi_dsi_rockchip_config(struct dw_mipi_dsi_rockchip *dsi,
|
|
int mux)
|
|
{
|
|
if (dsi->cdata->lcdsel_grf_reg)
|
|
regmap_write(dsi->grf_regmap, dsi->cdata->lcdsel_grf_reg,
|
|
mux ? dsi->cdata->lcdsel_lit : dsi->cdata->lcdsel_big);
|
|
|
|
if (dsi->cdata->lanecfg1_grf_reg)
|
|
regmap_write(dsi->grf_regmap, dsi->cdata->lanecfg1_grf_reg,
|
|
dsi->cdata->lanecfg1);
|
|
|
|
if (dsi->cdata->lanecfg2_grf_reg)
|
|
regmap_write(dsi->grf_regmap, dsi->cdata->lanecfg2_grf_reg,
|
|
dsi->cdata->lanecfg2);
|
|
|
|
if (dsi->cdata->enable_grf_reg)
|
|
regmap_write(dsi->grf_regmap, dsi->cdata->enable_grf_reg,
|
|
dsi->cdata->enable);
|
|
}
|
|
|
|
static int
|
|
dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
|
|
struct drm_crtc_state *crtc_state,
|
|
struct drm_connector_state *conn_state)
|
|
{
|
|
struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
|
|
struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
|
|
|
|
switch (dsi->format) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
s->output_mode = ROCKCHIP_OUT_MODE_P888;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666:
|
|
s->output_mode = ROCKCHIP_OUT_MODE_P666;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB565:
|
|
s->output_mode = ROCKCHIP_OUT_MODE_P565;
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
s->output_type = DRM_MODE_CONNECTOR_DSI;
|
|
if (dsi->slave)
|
|
s->output_flags = ROCKCHIP_OUTPUT_DSI_DUAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
|
|
{
|
|
struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
|
|
int ret, mux;
|
|
|
|
mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node,
|
|
&dsi->encoder);
|
|
if (mux < 0)
|
|
return;
|
|
|
|
pm_runtime_get_sync(dsi->dev);
|
|
if (dsi->slave)
|
|
pm_runtime_get_sync(dsi->slave->dev);
|
|
|
|
/*
|
|
* For the RK3399, the clk of grf must be enabled before writing grf
|
|
* register. And for RK3288 or other soc, this grf_clk must be NULL,
|
|
* the clk_prepare_enable return true directly.
|
|
*/
|
|
ret = clk_prepare_enable(dsi->grf_clk);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
dw_mipi_dsi_rockchip_config(dsi, mux);
|
|
if (dsi->slave)
|
|
dw_mipi_dsi_rockchip_config(dsi->slave, mux);
|
|
|
|
clk_disable_unprepare(dsi->grf_clk);
|
|
}
|
|
|
|
static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
|
|
{
|
|
struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
|
|
|
|
if (dsi->slave)
|
|
pm_runtime_put(dsi->slave->dev);
|
|
pm_runtime_put(dsi->dev);
|
|
}
|
|
|
|
static const struct drm_encoder_helper_funcs
|
|
dw_mipi_dsi_encoder_helper_funcs = {
|
|
.atomic_check = dw_mipi_dsi_encoder_atomic_check,
|
|
.enable = dw_mipi_dsi_encoder_enable,
|
|
.disable = dw_mipi_dsi_encoder_disable,
|
|
};
|
|
|
|
static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = {
|
|
.destroy = drm_encoder_cleanup,
|
|
};
|
|
|
|
static int rockchip_dsi_drm_create_encoder(struct dw_mipi_dsi_rockchip *dsi,
|
|
struct drm_device *drm_dev)
|
|
{
|
|
struct drm_encoder *encoder = &dsi->encoder;
|
|
int ret;
|
|
|
|
encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
|
|
dsi->dev->of_node);
|
|
|
|
ret = drm_encoder_init(drm_dev, encoder, &dw_mipi_dsi_encoder_funcs,
|
|
DRM_MODE_ENCODER_DSI, NULL);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to initialize encoder with drm\n");
|
|
return ret;
|
|
}
|
|
|
|
drm_encoder_helper_add(encoder, &dw_mipi_dsi_encoder_helper_funcs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct device
|
|
*dw_mipi_dsi_rockchip_find_second(struct dw_mipi_dsi_rockchip *dsi)
|
|
{
|
|
const struct of_device_id *match;
|
|
struct device_node *node = NULL, *local;
|
|
|
|
match = of_match_device(dsi->dev->driver->of_match_table, dsi->dev);
|
|
|
|
local = of_graph_get_remote_node(dsi->dev->of_node, 1, 0);
|
|
if (!local)
|
|
return NULL;
|
|
|
|
while ((node = of_find_compatible_node(node, NULL,
|
|
match->compatible))) {
|
|
struct device_node *remote;
|
|
|
|
/* found ourself */
|
|
if (node == dsi->dev->of_node)
|
|
continue;
|
|
|
|
remote = of_graph_get_remote_node(node, 1, 0);
|
|
if (!remote)
|
|
continue;
|
|
|
|
/* same display device in port1-ep0 for both */
|
|
if (remote == local) {
|
|
struct dw_mipi_dsi_rockchip *dsi2;
|
|
struct platform_device *pdev;
|
|
|
|
pdev = of_find_device_by_node(node);
|
|
|
|
/*
|
|
* we have found the second, so will either return it
|
|
* or return with an error. In any case won't need the
|
|
* nodes anymore nor continue the loop.
|
|
*/
|
|
of_node_put(remote);
|
|
of_node_put(node);
|
|
of_node_put(local);
|
|
|
|
if (!pdev)
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
|
|
dsi2 = platform_get_drvdata(pdev);
|
|
if (!dsi2) {
|
|
platform_device_put(pdev);
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
|
|
return &pdev->dev;
|
|
}
|
|
|
|
of_node_put(remote);
|
|
}
|
|
|
|
of_node_put(local);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int dw_mipi_dsi_rockchip_bind(struct device *dev,
|
|
struct device *master,
|
|
void *data)
|
|
{
|
|
struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
|
|
struct drm_device *drm_dev = data;
|
|
struct device *second;
|
|
bool master1, master2;
|
|
int ret;
|
|
|
|
second = dw_mipi_dsi_rockchip_find_second(dsi);
|
|
if (IS_ERR(second))
|
|
return PTR_ERR(second);
|
|
|
|
if (second) {
|
|
master1 = of_property_read_bool(dsi->dev->of_node,
|
|
"clock-master");
|
|
master2 = of_property_read_bool(second->of_node,
|
|
"clock-master");
|
|
|
|
if (master1 && master2) {
|
|
DRM_DEV_ERROR(dsi->dev, "only one clock-master allowed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!master1 && !master2) {
|
|
DRM_DEV_ERROR(dsi->dev, "no clock-master defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* we are the slave in dual-DSI */
|
|
if (!master1) {
|
|
dsi->is_slave = true;
|
|
return 0;
|
|
}
|
|
|
|
dsi->slave = dev_get_drvdata(second);
|
|
if (!dsi->slave) {
|
|
DRM_DEV_ERROR(dev, "could not get slaves data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
dsi->slave->is_slave = true;
|
|
dw_mipi_dsi_set_slave(dsi->dmd, dsi->slave->dmd);
|
|
put_device(second);
|
|
}
|
|
|
|
ret = clk_prepare_enable(dsi->pllref_clk);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "Failed to enable pllref_clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = rockchip_dsi_drm_create_encoder(dsi, drm_dev);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "Failed to create drm encoder\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = dw_mipi_dsi_bind(dsi->dmd, &dsi->encoder);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mipi_dsi_rockchip_unbind(struct device *dev,
|
|
struct device *master,
|
|
void *data)
|
|
{
|
|
struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
|
|
|
|
if (dsi->is_slave)
|
|
return;
|
|
|
|
dw_mipi_dsi_unbind(dsi->dmd);
|
|
|
|
clk_disable_unprepare(dsi->pllref_clk);
|
|
}
|
|
|
|
static const struct component_ops dw_mipi_dsi_rockchip_ops = {
|
|
.bind = dw_mipi_dsi_rockchip_bind,
|
|
.unbind = dw_mipi_dsi_rockchip_unbind,
|
|
};
|
|
|
|
static int dw_mipi_dsi_rockchip_host_attach(void *priv_data,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct dw_mipi_dsi_rockchip *dsi = priv_data;
|
|
struct device *second;
|
|
int ret;
|
|
|
|
ret = component_add(dsi->dev, &dw_mipi_dsi_rockchip_ops);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dsi->dev, "Failed to register component: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
second = dw_mipi_dsi_rockchip_find_second(dsi);
|
|
if (IS_ERR(second))
|
|
return PTR_ERR(second);
|
|
if (second) {
|
|
ret = component_add(second, &dw_mipi_dsi_rockchip_ops);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(second,
|
|
"Failed to register component: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mipi_dsi_rockchip_host_detach(void *priv_data,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct dw_mipi_dsi_rockchip *dsi = priv_data;
|
|
struct device *second;
|
|
|
|
second = dw_mipi_dsi_rockchip_find_second(dsi);
|
|
if (second && !IS_ERR(second))
|
|
component_del(second, &dw_mipi_dsi_rockchip_ops);
|
|
|
|
component_del(dsi->dev, &dw_mipi_dsi_rockchip_ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_mipi_dsi_host_ops dw_mipi_dsi_rockchip_host_ops = {
|
|
.attach = dw_mipi_dsi_rockchip_host_attach,
|
|
.detach = dw_mipi_dsi_rockchip_host_detach,
|
|
};
|
|
|
|
static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct dw_mipi_dsi_rockchip *dsi;
|
|
struct resource *res;
|
|
const struct rockchip_dw_dsi_chip_data *cdata =
|
|
of_device_get_match_data(dev);
|
|
int ret, i;
|
|
|
|
dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
|
|
if (!dsi)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
dsi->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(dsi->base)) {
|
|
DRM_DEV_ERROR(dev, "Unable to get dsi registers\n");
|
|
return PTR_ERR(dsi->base);
|
|
}
|
|
|
|
i = 0;
|
|
while (cdata[i].reg) {
|
|
if (cdata[i].reg == res->start) {
|
|
dsi->cdata = &cdata[i];
|
|
break;
|
|
}
|
|
|
|
i++;
|
|
}
|
|
|
|
if (!dsi->cdata) {
|
|
dev_err(dev, "no dsi-config for %s node\n", np->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dsi->pllref_clk = devm_clk_get(dev, "ref");
|
|
if (IS_ERR(dsi->pllref_clk)) {
|
|
ret = PTR_ERR(dsi->pllref_clk);
|
|
DRM_DEV_ERROR(dev,
|
|
"Unable to get pll reference clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (dsi->cdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) {
|
|
dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
|
|
if (IS_ERR(dsi->phy_cfg_clk)) {
|
|
ret = PTR_ERR(dsi->phy_cfg_clk);
|
|
DRM_DEV_ERROR(dev,
|
|
"Unable to get phy_cfg_clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (dsi->cdata->flags & DW_MIPI_NEEDS_GRF_CLK) {
|
|
dsi->grf_clk = devm_clk_get(dev, "grf");
|
|
if (IS_ERR(dsi->grf_clk)) {
|
|
ret = PTR_ERR(dsi->grf_clk);
|
|
DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
|
|
if (IS_ERR(dsi->grf_regmap)) {
|
|
DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n");
|
|
return PTR_ERR(dsi->grf_regmap);
|
|
}
|
|
|
|
dsi->dev = dev;
|
|
dsi->pdata.base = dsi->base;
|
|
dsi->pdata.max_data_lanes = dsi->cdata->max_data_lanes;
|
|
dsi->pdata.phy_ops = &dw_mipi_dsi_rockchip_phy_ops;
|
|
dsi->pdata.host_ops = &dw_mipi_dsi_rockchip_host_ops;
|
|
dsi->pdata.priv_data = dsi;
|
|
platform_set_drvdata(pdev, dsi);
|
|
|
|
dsi->dmd = dw_mipi_dsi_probe(pdev, &dsi->pdata);
|
|
if (IS_ERR(dsi->dmd)) {
|
|
ret = PTR_ERR(dsi->dmd);
|
|
if (ret != -EPROBE_DEFER)
|
|
DRM_DEV_ERROR(dev,
|
|
"Failed to probe dw_mipi_dsi: %d\n", ret);
|
|
goto err_clkdisable;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_clkdisable:
|
|
clk_disable_unprepare(dsi->pllref_clk);
|
|
return ret;
|
|
}
|
|
|
|
static int dw_mipi_dsi_rockchip_remove(struct platform_device *pdev)
|
|
{
|
|
struct dw_mipi_dsi_rockchip *dsi = platform_get_drvdata(pdev);
|
|
|
|
if (dsi->devcnt == 0)
|
|
component_del(dsi->dev, &dw_mipi_dsi_rockchip_ops);
|
|
|
|
dw_mipi_dsi_remove(dsi->dmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct rockchip_dw_dsi_chip_data rk3288_chip_data[] = {
|
|
{
|
|
.reg = 0xff960000,
|
|
.lcdsel_grf_reg = RK3288_GRF_SOC_CON6,
|
|
.lcdsel_big = HIWORD_UPDATE(0, RK3288_DSI0_LCDC_SEL),
|
|
.lcdsel_lit = HIWORD_UPDATE(RK3288_DSI0_LCDC_SEL, RK3288_DSI0_LCDC_SEL),
|
|
|
|
.max_data_lanes = 4,
|
|
},
|
|
{
|
|
.reg = 0xff964000,
|
|
.lcdsel_grf_reg = RK3288_GRF_SOC_CON6,
|
|
.lcdsel_big = HIWORD_UPDATE(0, RK3288_DSI1_LCDC_SEL),
|
|
.lcdsel_lit = HIWORD_UPDATE(RK3288_DSI1_LCDC_SEL, RK3288_DSI1_LCDC_SEL),
|
|
|
|
.max_data_lanes = 4,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct rockchip_dw_dsi_chip_data rk3399_chip_data[] = {
|
|
{
|
|
.reg = 0xff960000,
|
|
.lcdsel_grf_reg = RK3399_GRF_SOC_CON20,
|
|
.lcdsel_big = HIWORD_UPDATE(0, RK3399_DSI0_LCDC_SEL),
|
|
.lcdsel_lit = HIWORD_UPDATE(RK3399_DSI0_LCDC_SEL,
|
|
RK3399_DSI0_LCDC_SEL),
|
|
|
|
.lanecfg1_grf_reg = RK3399_GRF_SOC_CON22,
|
|
.lanecfg1 = HIWORD_UPDATE(0, RK3399_DSI0_TURNREQUEST |
|
|
RK3399_DSI0_TURNDISABLE |
|
|
RK3399_DSI0_FORCETXSTOPMODE |
|
|
RK3399_DSI0_FORCERXMODE),
|
|
|
|
.flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK,
|
|
.max_data_lanes = 4,
|
|
},
|
|
{
|
|
.reg = 0xff968000,
|
|
.lcdsel_grf_reg = RK3399_GRF_SOC_CON20,
|
|
.lcdsel_big = HIWORD_UPDATE(0, RK3399_DSI1_LCDC_SEL),
|
|
.lcdsel_lit = HIWORD_UPDATE(RK3399_DSI1_LCDC_SEL,
|
|
RK3399_DSI1_LCDC_SEL),
|
|
|
|
.lanecfg1_grf_reg = RK3399_GRF_SOC_CON23,
|
|
.lanecfg1 = HIWORD_UPDATE(0, RK3399_DSI1_TURNDISABLE |
|
|
RK3399_DSI1_FORCETXSTOPMODE |
|
|
RK3399_DSI1_FORCERXMODE |
|
|
RK3399_DSI1_ENABLE),
|
|
|
|
.lanecfg2_grf_reg = RK3399_GRF_SOC_CON24,
|
|
.lanecfg2 = HIWORD_UPDATE(RK3399_TXRX_MASTERSLAVEZ |
|
|
RK3399_TXRX_ENABLECLK,
|
|
RK3399_TXRX_MASTERSLAVEZ |
|
|
RK3399_TXRX_ENABLECLK |
|
|
RK3399_TXRX_BASEDIR),
|
|
|
|
.enable_grf_reg = RK3399_GRF_SOC_CON23,
|
|
.enable = HIWORD_UPDATE(RK3399_DSI1_ENABLE, RK3399_DSI1_ENABLE),
|
|
|
|
.flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK,
|
|
.max_data_lanes = 4,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct of_device_id dw_mipi_dsi_rockchip_dt_ids[] = {
|
|
{
|
|
.compatible = "rockchip,rk3288-mipi-dsi",
|
|
.data = &rk3288_chip_data,
|
|
}, {
|
|
.compatible = "rockchip,rk3399-mipi-dsi",
|
|
.data = &rk3399_chip_data,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_mipi_dsi_rockchip_dt_ids);
|
|
|
|
struct platform_driver dw_mipi_dsi_rockchip_driver = {
|
|
.probe = dw_mipi_dsi_rockchip_probe,
|
|
.remove = dw_mipi_dsi_rockchip_remove,
|
|
.driver = {
|
|
.of_match_table = dw_mipi_dsi_rockchip_dt_ids,
|
|
.name = "dw-mipi-dsi-rockchip",
|
|
},
|
|
};
|