e4a604cbee
The NXP pcf85063 supports two different xtal load capacitance - 7000fF (7pF) HW default, Linux driver default - 12500fF (12.5pF) Minimum power consumption To obtain a precise RTC the pcf85063 must be configured with the correct capacitance load of the xtal. Add a property to specify the xtal capacitance load. The default value matches that of the current Linux driver. With a dedicated binding remove the entry in rtc.txt Signed-off-by: Søren Andersen <san@skov.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Urs Fässler <urs.fassler@bbv.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
19 lines
450 B
Plaintext
19 lines
450 B
Plaintext
* NXP PCF85063 Real Time Clock
|
|
|
|
Required properties:
|
|
- compatible: Should contain "nxp,pcf85063".
|
|
- reg: I2C address for chip.
|
|
|
|
Optional property:
|
|
- quartz-load-femtofarads: The capacitive load of the quartz(x-tal),
|
|
expressed in femto Farad (fF). Valid values are 7000 and 12500.
|
|
Default value (if no value is specified) is 7000fF.
|
|
|
|
Example:
|
|
|
|
pcf85063: rtc@51 {
|
|
compatible = "nxp,pcf85063";
|
|
reg = <0x51>;
|
|
quartz-load-femtofarads = <12500>;
|
|
};
|