linux/drivers/usb
Yoshihiro Shimoda 2acecd5896 usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3
The latest HW manual (Rev.0.55) shows us this UGCTRL2.VBUSSEL bit.
If the bit sets to 1, the VBUS drive is controlled by phy related
registers (called "UCOM Registers" on the manual). Since R-Car Gen3
environment will control VBUS by phy-rcar-gen3-usb2 driver,
the UGCTRL2.VBUSSEL bit should be set to 1. So, this patch fixes
the register's value. Otherwise, even if the ID pin indicates to
peripheral, the R-Car will output USBn_PWEN to 1 when a host driver
is running.

Fixes: de18757e27 ("usb: renesas_usbhs: add R-Car Gen3 power control"
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-03 12:32:25 +03:00
..
atm
c67x00
chipidea One patch to improve error handling at chipidea core 2017-06-27 17:35:31 +02:00
class USB: cdc-acm: add device-id for quirky printer 2017-07-17 13:11:56 +02:00
common DeviceTree for 4.12: 2017-05-05 19:33:07 -07:00
core Merge branch 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2017-07-06 20:57:13 -07:00
dwc2 usb: dwc2: gadget: On USB RESET reset device address to zero 2017-07-18 08:57:36 +03:00
dwc3 usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets 2017-08-03 12:30:51 +03:00
early usb/early: Remove trace_printk() callers in xhci-dbc 2017-06-13 10:54:40 +02:00
gadget usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling 2017-08-03 12:31:17 +03:00
host xhci: fix memleak in xhci_run() 2017-07-20 14:40:36 +02:00
image
isp1760
misc usb: typec: ucsi: Add ACPI driver 2017-06-27 17:55:45 +02:00
mon
mtu3 usb: mtu3: Handle return value of clk_prepare_enable 2017-06-13 13:21:06 +03:00
musb usb: musb: compress return logic into one line 2017-06-27 17:55:06 +02:00
phy usb: phy: phy-msm-usb: Fix usage of devm_regulator_bulk_get() 2017-08-03 12:32:13 +03:00
renesas_usbhs usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3 2017-08-03 12:32:25 +03:00
serial USB: serial: safe_serial: move __inline__ before return type 2017-07-12 16:26:04 -07:00
storage usb: storage: return on error to avoid a null pointer dereference 2017-07-17 13:11:57 +02:00
typec usb: typec: include linux/device.h in ucsi.h 2017-07-17 13:11:56 +02:00
usbip driver core patches for 4.13-rc1 2017-07-03 20:27:48 -07:00
wusbcore
Kconfig usb: USB Type-C connector class 2017-03-23 13:48:44 +01:00
Makefile USB patches for 4.12-rc1 2017-05-04 18:03:51 -07:00
README
usb-skeleton.c USB: usb-skeleton: refactor endpoint retrieval 2017-03-23 13:54:08 +01:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.