linux/drivers/gpio
Geert Uytterhoeven 2a9a2f27d3 gpio: pca953x: Add wake-up support
Implement the irq_set_wake() method in the (optional) irq_chip of the
GPIO expander, and propagate wake-up settings to the upstream interrupt
controller.  This allows GPIOs connected to a PCA953X GPIO expander to
serve as wake-up sources.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-20 10:30:45 +01:00
..
gpio-74x164.c
gpio-74xx-mmio.c
gpio-104-dio-48e.c gpio: 104-dio-48e: Mask read inputs for get_multiple 2018-11-05 08:54:41 +01:00
gpio-104-idi-48.c gpio: 104-idi-48e: Mask the read inputs for get_multiple 2018-11-05 08:54:41 +01:00
gpio-104-idio-16.c
gpio-adnp.c
gpio-adp5520.c drivers: gpio: Update MODULE AUTHOR email address 2018-08-29 13:30:25 +02:00
gpio-adp5588.c gpio: adp5588.c: Switch to events system 2019-02-09 11:33:37 +01:00
gpio-altera-a10sr.c gpio: altera-a10sr: Trivial coding style fix 2019-02-14 15:14:38 +01:00
gpio-altera.c gpio: altera: Fixup block comment style 2019-01-28 14:59:58 +01:00
gpio-amd8111.c
gpio-amdpt.c
gpio-arizona.c
gpio-aspeed.c gpio: aspeed: remove duplicated statement 2018-12-21 11:14:11 +01:00
gpio-ath79.c
gpio-bcm-kona.c gpio-bcm-kona: use new req/relres and dis/enable_irq funcs 2018-09-10 08:57:36 +02:00
gpio-bd9571mwv.c
gpio-brcmstb.c gpio: brcmstb: allow 0 width GPIO banks 2018-08-30 11:04:50 +02:00
gpio-bt8xx.c
gpio-cadence.c gpio: Add Cadence GPIO driver 2018-12-21 11:41:00 +01:00
gpio-clps711x.c
gpio-creg-snps.c GPIO: add single-register GPIO via CREG driver 2018-10-10 09:21:06 +02:00
gpio-crystalcove.c gpio: crystalcove: Convert to use SPDX identifier 2019-02-08 15:55:40 +02:00
gpio-cs5535.c
gpio-da9052.c
gpio-da9055.c
gpio-davinci.c gpio: davinci: restore a way to manually specify the GPIO base 2018-11-26 16:45:10 +05:30
gpio-dln2.c
gpio-dwapb.c gpio: gpio-dwapb: simplify getting .driver_data 2018-11-05 08:54:41 +01:00
gpio-eic-sprd.c gpio updates for v5.1 2019-02-17 21:59:33 +01:00
gpio-em.c
gpio-ep93xx.c gpio: ep93xx: fix test for end of loop 2018-09-10 08:48:24 +02:00
gpio-exar.c
gpio-f7188x.c gpio-f7188x: add support Fintek F81804 & F81966 2019-01-22 15:48:44 +01:00
gpio-ftgpio010.c gpio: ftgpio: Support debounce timer 2018-08-30 09:14:54 +02:00
gpio-ge.c
gpio-gpio-mm.c gpio: gpio-mm: Mask read inputs for get_multiple 2018-11-05 08:54:41 +01:00
gpio-grgpio.c drivers/gpio/gpio-grgpio.c: Remove duplicate header 2018-11-19 15:09:22 +01:00
gpio-gw-pld.c gpio: Add a Gateworks PLD GPIO driver 2019-02-09 11:33:37 +01:00
gpio-hlwd.c gpio: hlwd: Implement edge trigger emulation 2019-01-21 14:34:45 +01:00
gpio-htc-egpio.c gpio: htc-egpio: Remove set but not used variable 'bit' 2018-10-01 12:27:19 +02:00
gpio-ich.c gpio: ich: Convert to use SPDX identifier 2018-12-07 17:34:07 +02:00
gpio-intel-mid.c gpio: intel-mid: Convert to use SPDX identifier 2018-12-07 17:34:07 +02:00
gpio-iop.c
gpio-it87.c gpio: it87: Add support for IT8613 2018-08-10 23:19:17 +02:00
gpio-janz-ttl.c
gpio-kempld.c
gpio-ks8695.c gpio: ks8695: Change to use DEFINE_SHOW_ATTRIBUTE macro 2018-12-07 11:10:14 +01:00
gpio-loongson1.c
gpio-loongson.c
gpio-lp873x.c
gpio-lp3943.c
gpio-lp87565.c
gpio-lpc18xx.c gpio: lpc18xx: fix GPIO controller driver build as a module 2018-12-10 09:10:46 +01:00
gpio-lpc32xx.c
gpio-lynxpoint.c intel-gpio for v4.21-1 2018-12-14 14:27:41 +01:00
gpio-madera.c gpio: madera: Add missing const 2019-02-14 15:14:37 +01:00
gpio-max730x.c
gpio-max732x.c
gpio-max3191x.c gpiolib: Pass array info to get/set array functions 2018-09-13 11:16:54 +02:00
gpio-max7300.c
gpio-max7301.c gpio: max7301: fix driver for use with CONFIG_VMAP_STACK 2018-12-21 09:23:45 +01:00
gpio-max77620.c regmap: regmap-irq/gpio-max77620: add level-irq support 2018-12-19 18:35:45 +00:00
gpio-mb86s7x.c
gpio-mc9s08dz60.c
gpio-mc33880.c
gpio-menz127.c
gpio-merrifield.c gpio: merrifield: Convert to use SPDX identifier 2018-12-07 17:34:08 +02:00
gpio-ml-ioh.c
gpio-mm-lantiq.c
gpio-mmio.c gpio: Use SPDX header for core library 2018-09-25 09:08:48 +02:00
gpio-mockup.c gpio: mockup: rework debugfs interface 2019-02-19 17:42:29 +01:00
gpio-mpc8xxx.c
gpio-mpc5200.c
gpio-msic.c gpio: msic: Convert to use SPDX identifier 2019-02-08 15:55:41 +02:00
gpio-mt7621.c gpio: mt7621: pass mediatek_gpio_bank_probe() failure up the stack 2018-12-07 10:47:24 +01:00
gpio-mvebu.c gpio: mvebu: implement get_direction 2019-01-10 16:19:11 +01:00
gpio-mxc.c gpio: mxc: move gpio noirq suspend/resume to syscore phase 2018-11-16 22:56:54 +01:00
gpio-mxs.c gpio: mxs: read pin level directly instead of using .get 2018-12-21 11:29:57 +01:00
gpio-octeon.c
gpio-omap.c This is the bulk of GPIO changes for the v4.21 kernel series: 2018-12-28 20:00:21 -08:00
gpio-palmas.c
gpio-pca953x.c gpio: pca953x: Add wake-up support 2019-02-20 10:30:45 +01:00
gpio-pcf857x.c gpio updates for v5.1 2019-02-17 21:59:33 +01:00
gpio-pch.c gpio: pch: Convert to use SPDX identifier 2018-12-07 17:34:08 +02:00
gpio-pci-idio-16.c gpio: pci-idio-16: Mask read inputs for get_multiple 2018-11-05 08:54:42 +01:00
gpio-pcie-idio-24.c gpio: pcie-idio-24: Mask read inputs for get_multiple 2018-11-05 08:54:42 +01:00
gpio-pisosr.c
gpio-pl061.c gpio: pl061: Move irq_chip definition inside struct pl061 2018-11-05 08:54:42 +01:00
gpio-pmic-eic-sprd.c gpio: sprd: Remove unused irq trigger setting 2019-01-21 13:47:12 +01:00
gpio-pxa.c gpio: pxa: fix legacy non pinctrl aware builds again 2018-11-16 23:06:29 +01:00
gpio-raspberrypi-exp.c gpio: raspberrypi-exp: decrease refcount on firmware dt node 2018-12-17 15:28:30 +01:00
gpio-rc5t583.c
gpio-rcar.c gpio: rcar: select General Output Register to set output states 2019-01-21 14:59:50 +01:00
gpio-rdc321x.c
gpio-reg.c
gpio-sa1100.c
gpio-sama5d2-piobu.c gpio: sama5d2-piobu: Set proper output level for direction_output 2019-01-11 10:34:37 +01:00
gpio-sch311x.c gpio: sch311x: clean an indentation issue, remove extraneous space 2018-11-05 08:54:42 +01:00
gpio-sch.c gpio: sch: Convert to use SPDX identifier 2018-12-07 17:34:08 +02:00
gpio-siox.c gpio: new driver to work with a 8x12 siox 2018-09-28 09:30:42 +02:00
gpio-sodaville.c gpio: sodaville: Convert to use SPDX identifier 2018-12-07 17:34:08 +02:00
gpio-spear-spics.c
gpio-sprd.c
gpio-sta2x11.c
gpio-stmpe.c
gpio-stp-xway.c
gpio-syscon.c gpio: syscon: Fix possible NULL ptr usage 2018-10-10 10:33:11 +02:00
gpio-tb10x.c gpio: tb10x: Use GENERIC_GPIO 2018-08-29 08:53:37 +02:00
gpio-tc3589x.c
gpio-tegra186.c gpio: tegra186: Use TEGRA186_ prefix for GPIO names 2019-02-14 15:14:38 +01:00
gpio-tegra.c gpio: tegra: Fix offset of pinctrl calls 2019-02-19 21:48:20 +01:00
gpio-thunderx.c
gpio-timberdale.c
gpio-tpic2810.c
gpio-tps6586x.c gpio: tps65xxx: Use SPDX license tag 2018-09-04 08:22:47 +02:00
gpio-tps65086.c gpio: tps65xxx: Use SPDX license tag 2018-09-04 08:22:47 +02:00
gpio-tps65218.c
gpio-tps65910.c gpio: tps65xxx: Use SPDX license tag 2018-09-04 08:22:47 +02:00
gpio-tps65912.c gpio: tps65xxx: Use SPDX license tag 2018-09-04 08:22:47 +02:00
gpio-tps68470.c
gpio-tqmx86.c gpio: tqmx86: Drop unnecessary gpiochip_remove in tqmx86_gpio_probe() 2019-02-09 11:33:37 +01:00
gpio-ts4800.c
gpio-ts4900.c
gpio-ts5500.c gpio: ts5500: Delete platform data handling 2018-09-04 08:22:47 +02:00
gpio-twl4030.c gpio: twl4030: Implement .get_direction() 2018-09-10 08:48:51 +02:00
gpio-twl6040.c gpio: twl6040: Implement .get_direction() 2018-09-10 08:49:22 +02:00
gpio-ucb1400.c
gpio-uniphier.c gpio: uniphier: convert to SPDX License Identifier 2018-12-07 13:40:28 +01:00
gpio-vf610.c gpio: vf610: Mask all GPIO interrupts 2019-01-28 15:28:43 +01:00
gpio-viperboard.c gpio: viperboard: Cut down on boilerplate 2018-09-17 10:55:24 -07:00
gpio-vr41xx.c gpio: vr41xx: Delete vr41xx_gpio_pullupdown() callback 2018-09-17 10:55:24 -07:00
gpio-vx855.c gpio: vx855: Cut down on boilerplate 2018-09-17 10:55:24 -07:00
gpio-wcove.c gpio: wcove: Convert to use SPDX identifier 2019-02-08 15:55:41 +02:00
gpio-winbond.c
gpio-wm831x.c gpio: wm8xxx: Cut down on boilerplate 2018-09-17 10:55:24 -07:00
gpio-wm8350.c gpio: wm8xxx: Cut down on boilerplate 2018-09-17 10:55:24 -07:00
gpio-wm8994.c gpio: wm8xxx: Cut down on boilerplate 2018-09-17 10:55:24 -07:00
gpio-ws16c48.c gpio: ws16c48: Mask read inputs for get_multiple 2018-11-05 08:54:42 +01:00
gpio-xgene-sb.c
gpio-xgene.c
gpio-xilinx.c
gpio-xlp.c gpio: xlp: Cut down on boilerplate 2018-09-17 10:55:24 -07:00
gpio-xra1403.c
gpio-xtensa.c gpio: xtensa: Cut down on boilerplate 2018-09-17 10:55:24 -07:00
gpio-zevio.c gpio: zevio: Include the right header 2018-09-04 08:22:47 +02:00
gpio-zx.c
gpio-zynq.c gpio: zynq: properly support runtime PM for GPIO used as interrupts 2019-02-13 10:36:54 +01:00
gpiolib-acpi.c gpio updates for v5.1 2019-02-17 21:59:33 +01:00
gpiolib-devprop.c Accept partial 'gpio-line-names' property. 2018-10-01 13:15:06 +02:00
gpiolib-devres.c gpio: Add devm_gpiod_unhinge() 2018-12-11 01:04:23 +00:00
gpiolib-legacy.c gpio: Use SPDX header for core library 2018-09-25 09:08:48 +02:00
gpiolib-of.c gpio: of: Apply regulator-gpio quirk only to enable-gpios 2019-02-17 22:20:11 +01:00
gpiolib-sysfs.c gpio: Use SPDX header for core library 2018-09-25 09:08:48 +02:00
gpiolib.c gpio updates for v5.1 2019-02-17 21:59:33 +01:00
gpiolib.h gpio: add core support for pull-up/pull-down configuration 2019-02-13 09:10:14 +01:00
Kconfig gpio: Add a Gateworks PLD GPIO driver 2019-02-09 11:33:37 +01:00
Makefile gpio: Add a Gateworks PLD GPIO driver 2019-02-09 11:33:37 +01:00
TODO gpio: Add global TODO file for GPIO 2018-11-05 08:54:40 +01:00