leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
28f55ebce5
linux/drivers/acpi/dispatcher/dswload.c
Bob Moore 28f55ebce5 [ACPI] ACPICA 20051202 
Modified the parsing of control methods to no longer
create namespace objects during the first pass of the
parse. Objects are now created only during the execute
phase, at the moment the namespace creation operator
is encountered in the AML (Name, OperationRegion,
CreateByteField, etc.) This should eliminate ALREADY_EXISTS
exceptions seen on some machines where reentrant control
methods are protected by an AML mutex. The mutex will now
correctly block multiple threads from attempting to create
the same object more than once.

Increased the number of available Owner Ids for namespace
object tracking from 32 to 255. This should eliminate the
OWNER_ID_LIMIT exceptions seen on some machines with a
large number of ACPI tables (either static or dynamic).

Enhanced the namespace dump routine to output the owner
ID for each namespace object.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-10 00:29:11 -05:00

1081 lines
28 KiB
C
Raw Blame History

/******************************************************************************
*
* Module Name: dswload - Dispatcher namespace load callbacks
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acparser.h>
#include <acpi/amlcode.h>
#include <acpi/acdispat.h>
#include <acpi/acinterp.h>
#include <acpi/acnamesp.h>
#include <acpi/acevents.h>
#ifdef ACPI_ASL_COMPILER
#include <acpi/acdisasm.h>
#endif
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME("dswload")
/*******************************************************************************
*
* FUNCTION: acpi_ds_init_callbacks
*
* PARAMETERS: walk_state - Current state of the parse tree walk
* pass_number - 1, 2, or 3
*
* RETURN: Status
*
* DESCRIPTION: Init walk state callbacks
*
******************************************************************************/
acpi_status
acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
{
switch (pass_number) {
case 1:
walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
ACPI_PARSE_DELETE_TREE;
walk_state->descending_callback = acpi_ds_load1_begin_op;
walk_state->ascending_callback = acpi_ds_load1_end_op;
break;
case 2:
walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
ACPI_PARSE_DELETE_TREE;
walk_state->descending_callback = acpi_ds_load2_begin_op;
walk_state->ascending_callback = acpi_ds_load2_end_op;
break;
case 3:
#ifndef ACPI_NO_METHOD_EXECUTION
walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
ACPI_PARSE_DELETE_TREE;
walk_state->descending_callback = acpi_ds_exec_begin_op;
walk_state->ascending_callback = acpi_ds_exec_end_op;
#endif
break;
default:
return (AE_BAD_PARAMETER);
}
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_load1_begin_op
*
* PARAMETERS: walk_state - Current state of the parse tree walk
* out_op - Where to return op if a new one is created
*
* RETURN: Status
*
* DESCRIPTION: Descending callback used during the loading of ACPI tables.
*
******************************************************************************/
acpi_status
acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
union acpi_parse_object ** out_op)
{
union acpi_parse_object *op;
struct acpi_namespace_node *node;
acpi_status status;
acpi_object_type object_type;
char *path;
u32 flags;
ACPI_FUNCTION_TRACE("ds_load1_begin_op");
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
walk_state));
/* We are only interested in opcodes that have an associated name */
if (op) {
if (!(walk_state->op_info->flags & AML_NAMED)) {
*out_op = op;
return_ACPI_STATUS(AE_OK);
}
/* Check if this object has already been installed in the namespace */
if (op->common.node) {
*out_op = op;
return_ACPI_STATUS(AE_OK);
}
}
path = acpi_ps_get_next_namestring(&walk_state->parser_state);
/* Map the raw opcode into an internal object type */
object_type = walk_state->op_info->object_type;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"State=%p Op=%p [%s]\n", walk_state, op,
acpi_ut_get_type_name(object_type)));
switch (walk_state->opcode) {
case AML_SCOPE_OP:
/*
* The target name of the Scope() operator must exist at this point so
* that we can actually open the scope to enter new names underneath it.
* Allow search-to-root for single namesegs.
*/
status =
acpi_ns_lookup(walk_state->scope_info, path, object_type,
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, &(node));
#ifdef ACPI_ASL_COMPILER
if (status == AE_NOT_FOUND) {
/*
* Table disassembly:
* Target of Scope() not found. Generate an External for it, and
* insert the name into the namespace.
*/
acpi_dm_add_to_external_list(path);
status =
acpi_ns_lookup(walk_state->scope_info, path,
object_type, ACPI_IMODE_LOAD_PASS1,
ACPI_NS_SEARCH_PARENT, walk_state,
&(node));
}
#endif
if (ACPI_FAILURE(status)) {
ACPI_REPORT_NSERROR(path, status);
return_ACPI_STATUS(status);
}
/*
* Check to make sure that the target is
* one of the opcodes that actually opens a scope
*/
switch (node->type) {
case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_POWER:
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_THERMAL:
/* These are acceptable types */
break;
case ACPI_TYPE_INTEGER:
case ACPI_TYPE_STRING:
case ACPI_TYPE_BUFFER:
/*
* These types we will allow, but we will change the type. This
* enables some existing code of the form:
*
* Name (DEB, 0)
* Scope (DEB) { ... }
*
* Note: silently change the type here. On the second pass, we will report
* a warning
*/
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n",
path,
acpi_ut_get_type_name(node->type)));
node->type = ACPI_TYPE_ANY;
walk_state->scope_info->common.value = ACPI_TYPE_ANY;
break;
default:
/* All other types are an error */
ACPI_REPORT_ERROR(("Invalid type (%s) for target of Scope operator [%4.4s] (Cannot override)\n", acpi_ut_get_type_name(node->type), path));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
break;
default:
/*
* For all other named opcodes, we will enter the name into
* the namespace.
*
* Setup the search flags.
* Since we are entering a name into the namespace, we do not want to
* enable the search-to-root upsearch.
*
* There are only two conditions where it is acceptable that the name
* already exists:
* 1) the Scope() operator can reopen a scoping object that was
* previously defined (Scope, Method, Device, etc.)
* 2) Whenever we are parsing a deferred opcode (op_region, Buffer,
* buffer_field, or Package), the name of the object is already
* in the namespace.
*/
if (walk_state->deferred_node) {
/* This name is already in the namespace, get the node */
node = walk_state->deferred_node;
status = AE_OK;
break;
}
/*
* If we are executing a method, do not create any namespace objects
* during the load phase, only during execution.
*/
if (walk_state->method_node) {
node = NULL;
status = AE_OK;
break;
}
flags = ACPI_NS_NO_UPSEARCH;
if ((walk_state->opcode != AML_SCOPE_OP) &&
(!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
flags |= ACPI_NS_ERROR_IF_FOUND;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"[%s] Cannot already exist\n",
acpi_ut_get_type_name(object_type)));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"[%s] Both Find or Create allowed\n",
acpi_ut_get_type_name(object_type)));
}
/*
* Enter the named type into the internal namespace. We enter the name
* as we go downward in the parse tree. Any necessary subobjects that
* involve arguments to the opcode must be created as we go back up the
* parse tree later.
*/
status =
acpi_ns_lookup(walk_state->scope_info, path, object_type,
ACPI_IMODE_LOAD_PASS1, flags, walk_state,
&(node));
if (ACPI_FAILURE(status)) {
ACPI_REPORT_NSERROR(path, status);
return_ACPI_STATUS(status);
}
break;
}
/* Common exit */
if (!op) {
/* Create a new op */
op = acpi_ps_alloc_op(walk_state->opcode);
if (!op) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
}
/* Initialize the op */
#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
op->named.path = ACPI_CAST_PTR(u8, path);
#endif
if (node) {
/*
* Put the Node in the "op" object that the parser uses, so we
* can get it again quickly when this scope is closed
*/
op->common.node = node;
op->named.name = node->name.integer;
}
acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
op);
*out_op = op;
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_load1_end_op
*
* PARAMETERS: walk_state - Current state of the parse tree walk
*
* RETURN: Status
*
* DESCRIPTION: Ascending callback used during the loading of the namespace,
* both control methods and everything else.
*
******************************************************************************/
acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
{
union acpi_parse_object *op;
acpi_object_type object_type;
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE("ds_load1_end_op");
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
walk_state));
/* We are only interested in opcodes that have an associated name */
if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
return_ACPI_STATUS(AE_OK);
}
/* Get the object type to determine if we should pop the scope */
object_type = walk_state->op_info->object_type;
#ifndef ACPI_NO_METHOD_EXECUTION
if (walk_state->op_info->flags & AML_FIELD) {
/*
* If we are executing a method, do not create any namespace objects
* during the load phase, only during execution.
*/
if (!walk_state->method_node) {
if (walk_state->opcode == AML_FIELD_OP ||
walk_state->opcode == AML_BANK_FIELD_OP ||
walk_state->opcode == AML_INDEX_FIELD_OP) {
status =
acpi_ds_init_field_objects(op, walk_state);
}
}
return_ACPI_STATUS(status);
}
/*
* If we are executing a method, do not create any namespace objects
* during the load phase, only during execution.
*/
if (!walk_state->method_node) {
if (op->common.aml_opcode == AML_REGION_OP) {
status =
acpi_ex_create_region(op->named.data,
op->named.length,
(acpi_adr_space_type)
((op->common.value.arg)->
common.value.integer),
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
}
#endif
if (op->common.aml_opcode == AML_NAME_OP) {
/* For Name opcode, get the object type from the argument */
if (op->common.value.arg) {
object_type = (acpi_ps_get_opcode_info((op->common.
value.arg)->
common.
aml_opcode))->
object_type;
/* Set node type if we have a namespace node */
if (op->common.node) {
op->common.node->type = (u8) object_type;
}
}
}
if (op->common.aml_opcode == AML_METHOD_OP) {
/*
* method_op pkg_length name_string method_flags term_list
*
* Note: We must create the method node/object pair as soon as we
* see the method declaration. This allows later pass1 parsing
* of invocations of the method (need to know the number of
* arguments.)
*/
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"LOADING-Method: State=%p Op=%p named_obj=%p\n",
walk_state, op, op->named.node));
if (!acpi_ns_get_attached_object(op->named.node)) {
walk_state->operands[0] = (void *)op->named.node;
walk_state->num_operands = 1;
status =
acpi_ds_create_operands(walk_state,
op->common.value.arg);
if (ACPI_SUCCESS(status)) {
status = acpi_ex_create_method(op->named.data,
op->named.length,
walk_state);
}
walk_state->operands[0] = NULL;
walk_state->num_operands = 0;
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
}
/* Pop the scope stack */
if (acpi_ns_opens_scope(object_type)) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"(%s): Popping scope for Op %p\n",
acpi_ut_get_type_name(object_type), op));
status = acpi_ds_scope_stack_pop(walk_state);
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_load2_begin_op
*
* PARAMETERS: walk_state - Current state of the parse tree walk
* out_op - Wher to return op if a new one is created
*
* RETURN: Status
*
* DESCRIPTION: Descending callback used during the loading of ACPI tables.
*
******************************************************************************/
acpi_status
acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
union acpi_parse_object **out_op)
{
union acpi_parse_object *op;
struct acpi_namespace_node *node;
acpi_status status;
acpi_object_type object_type;
char *buffer_ptr;
ACPI_FUNCTION_TRACE("ds_load2_begin_op");
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
walk_state));
if (op) {
if ((walk_state->control_state) &&
(walk_state->control_state->common.state ==
ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
/* We are executing a while loop outside of a method */
status = acpi_ds_exec_begin_op(walk_state, out_op);
return_ACPI_STATUS(status);
}
/* We only care about Namespace opcodes here */
if ((!(walk_state->op_info->flags & AML_NSOPCODE) &&
(walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
(!(walk_state->op_info->flags & AML_NAMED))) {
#ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
if ((walk_state->op_info->class == AML_CLASS_EXECUTE) ||
(walk_state->op_info->class == AML_CLASS_CONTROL)) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"Begin/EXEC: %s (fl %8.8X)\n",
walk_state->op_info->name,
walk_state->op_info->flags));
/* Executing a type1 or type2 opcode outside of a method */
status =
acpi_ds_exec_begin_op(walk_state, out_op);
return_ACPI_STATUS(status);
}
#endif
return_ACPI_STATUS(AE_OK);
}
/* Get the name we are going to enter or lookup in the namespace */
if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
/* For Namepath op, get the path string */
buffer_ptr = op->common.value.string;
if (!buffer_ptr) {
/* No name, just exit */
return_ACPI_STATUS(AE_OK);
}
} else {
/* Get name from the op */
buffer_ptr = (char *)&op->named.name;
}
} else {
/* Get the namestring from the raw AML */
buffer_ptr =
acpi_ps_get_next_namestring(&walk_state->parser_state);
}
/* Map the opcode into an internal object type */
object_type = walk_state->op_info->object_type;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"State=%p Op=%p Type=%X\n", walk_state, op,
object_type));
switch (walk_state->opcode) {
case AML_FIELD_OP:
case AML_BANK_FIELD_OP:
case AML_INDEX_FIELD_OP:
node = NULL;
status = AE_OK;
break;
case AML_INT_NAMEPATH_OP:
/*
* The name_path is an object reference to an existing object.
* Don't enter the name into the namespace, but look it up
* for use later.
*/
status =
acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
object_type, ACPI_IMODE_EXECUTE,
ACPI_NS_SEARCH_PARENT, walk_state, &(node));
break;
case AML_SCOPE_OP:
/*
* The Path is an object reference to an existing object.
* Don't enter the name into the namespace, but look it up
* for use later.
*/
status =
acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
object_type, ACPI_IMODE_EXECUTE,
ACPI_NS_SEARCH_PARENT, walk_state, &(node));
if (ACPI_FAILURE(status)) {
#ifdef ACPI_ASL_COMPILER
if (status == AE_NOT_FOUND) {
status = AE_OK;
} else {
ACPI_REPORT_NSERROR(buffer_ptr, status);
}
#else
ACPI_REPORT_NSERROR(buffer_ptr, status);
#endif
return_ACPI_STATUS(status);
}
/*
* We must check to make sure that the target is
* one of the opcodes that actually opens a scope
*/
switch (node->type) {
case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_POWER:
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_THERMAL:
/* These are acceptable types */
break;
case ACPI_TYPE_INTEGER:
case ACPI_TYPE_STRING:
case ACPI_TYPE_BUFFER:
/*
* These types we will allow, but we will change the type. This
* enables some existing code of the form:
*
* Name (DEB, 0)
* Scope (DEB) { ... }
*/
ACPI_REPORT_WARNING(("Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n", buffer_ptr, acpi_ut_get_type_name(node->type)));
node->type = ACPI_TYPE_ANY;
walk_state->scope_info->common.value = ACPI_TYPE_ANY;
break;
default:
/* All other types are an error */
ACPI_REPORT_ERROR(("Invalid type (%s) for target of Scope operator [%4.4s]\n", acpi_ut_get_type_name(node->type), buffer_ptr));
return (AE_AML_OPERAND_TYPE);
}
break;
default:
/* All other opcodes */
if (op && op->common.node) {
/* This op/node was previously entered into the namespace */
node = op->common.node;
if (acpi_ns_opens_scope(object_type)) {
status =
acpi_ds_scope_stack_push(node, object_type,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
return_ACPI_STATUS(AE_OK);
}
/*
* Enter the named type into the internal namespace. We enter the name
* as we go downward in the parse tree. Any necessary subobjects that
* involve arguments to the opcode must be created as we go back up the
* parse tree later.
*
* Note: Name may already exist if we are executing a deferred opcode.
*/
if (walk_state->deferred_node) {
/* This name is already in the namespace, get the node */
node = walk_state->deferred_node;
status = AE_OK;
break;
}
/* Add new entry into namespace */
status =
acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
object_type, ACPI_IMODE_LOAD_PASS2,
ACPI_NS_NO_UPSEARCH, walk_state, &(node));
break;
}
if (ACPI_FAILURE(status)) {
ACPI_REPORT_NSERROR(buffer_ptr, status);
return_ACPI_STATUS(status);
}
if (!op) {
/* Create a new op */
op = acpi_ps_alloc_op(walk_state->opcode);
if (!op) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Initialize the new op */
if (node) {
op->named.name = node->name.integer;
}
*out_op = op;
}
/*
* Put the Node in the "op" object that the parser uses, so we
* can get it again quickly when this scope is closed
*/
op->common.node = node;
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_load2_end_op
*
* PARAMETERS: walk_state - Current state of the parse tree walk
*
* RETURN: Status
*
* DESCRIPTION: Ascending callback used during the loading of the namespace,
* both control methods and everything else.
*
******************************************************************************/
acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
{
union acpi_parse_object *op;
acpi_status status = AE_OK;
acpi_object_type object_type;
struct acpi_namespace_node *node;
union acpi_parse_object *arg;
struct acpi_namespace_node *new_node;
#ifndef ACPI_NO_METHOD_EXECUTION
u32 i;
#endif
ACPI_FUNCTION_TRACE("ds_load2_end_op");
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
walk_state->op_info->name, op, walk_state));
/* Check if opcode had an associated namespace object */
if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
#ifndef ACPI_NO_METHOD_EXECUTION
#ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
/* No namespace object. Executable opcode? */
if ((walk_state->op_info->class == AML_CLASS_EXECUTE) ||
(walk_state->op_info->class == AML_CLASS_CONTROL)) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"End/EXEC: %s (fl %8.8X)\n",
walk_state->op_info->name,
walk_state->op_info->flags));
/* Executing a type1 or type2 opcode outside of a method */
status = acpi_ds_exec_end_op(walk_state);
return_ACPI_STATUS(status);
}
#endif
#endif
return_ACPI_STATUS(AE_OK);
}
if (op->common.aml_opcode == AML_SCOPE_OP) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"Ending scope Op=%p State=%p\n", op,
walk_state));
}
object_type = walk_state->op_info->object_type;
/*
* Get the Node/name from the earlier lookup
* (It was saved in the *op structure)
*/
node = op->common.node;
/*
* Put the Node on the object stack (Contains the ACPI Name of
* this object)
*/
walk_state->operands[0] = (void *)node;
walk_state->num_operands = 1;
/* Pop the scope stack */
if (acpi_ns_opens_scope(object_type) &&
(op->common.aml_opcode != AML_INT_METHODCALL_OP)) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"(%s) Popping scope for Op %p\n",
acpi_ut_get_type_name(object_type), op));
status = acpi_ds_scope_stack_pop(walk_state);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
}
/*
* Named operations are as follows:
*
* AML_ALIAS
* AML_BANKFIELD
* AML_CREATEBITFIELD
* AML_CREATEBYTEFIELD
* AML_CREATEDWORDFIELD
* AML_CREATEFIELD
* AML_CREATEQWORDFIELD
* AML_CREATEWORDFIELD
* AML_DATA_REGION
* AML_DEVICE
* AML_EVENT
* AML_FIELD
* AML_INDEXFIELD
* AML_METHOD
* AML_METHODCALL
* AML_MUTEX
* AML_NAME
* AML_NAMEDFIELD
* AML_OPREGION
* AML_POWERRES
* AML_PROCESSOR
* AML_SCOPE
* AML_THERMALZONE
*/
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"Create-Load [%s] State=%p Op=%p named_obj=%p\n",
acpi_ps_get_opcode_name(op->common.aml_opcode),
walk_state, op, node));
/* Decode the opcode */
arg = op->common.value.arg;
switch (walk_state->op_info->type) {
#ifndef ACPI_NO_METHOD_EXECUTION
case AML_TYPE_CREATE_FIELD:
/*
* Create the field object, but the field buffer and index must
* be evaluated later during the execution phase
*/
status = acpi_ds_create_buffer_field(op, walk_state);
break;
case AML_TYPE_NAMED_FIELD:
/*
* If we are executing a method, initialize the field
*/
if (walk_state->method_node) {
status = acpi_ds_init_field_objects(op, walk_state);
}
switch (op->common.aml_opcode) {
case AML_INDEX_FIELD_OP:
status =
acpi_ds_create_index_field(op,
(acpi_handle) arg->
common.node, walk_state);
break;
case AML_BANK_FIELD_OP:
status =
acpi_ds_create_bank_field(op, arg->common.node,
walk_state);
break;
case AML_FIELD_OP:
status =
acpi_ds_create_field(op, arg->common.node,
walk_state);
break;
default:
/* All NAMED_FIELD opcodes must be handled above */
break;
}
break;
case AML_TYPE_NAMED_SIMPLE:
status = acpi_ds_create_operands(walk_state, arg);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
switch (op->common.aml_opcode) {
case AML_PROCESSOR_OP:
status = acpi_ex_create_processor(walk_state);
break;
case AML_POWER_RES_OP:
status = acpi_ex_create_power_resource(walk_state);
break;
case AML_MUTEX_OP:
status = acpi_ex_create_mutex(walk_state);
break;
case AML_EVENT_OP:
status = acpi_ex_create_event(walk_state);
break;
case AML_DATA_REGION_OP:
status = acpi_ex_create_table_region(walk_state);
break;
case AML_ALIAS_OP:
status = acpi_ex_create_alias(walk_state);
break;
default:
/* Unknown opcode */
status = AE_OK;
goto cleanup;
}
/* Delete operands */
for (i = 1; i < walk_state->num_operands; i++) {
acpi_ut_remove_reference(walk_state->operands[i]);
walk_state->operands[i] = NULL;
}
break;
#endif /* ACPI_NO_METHOD_EXECUTION */
case AML_TYPE_NAMED_COMPLEX:
switch (op->common.aml_opcode) {
#ifndef ACPI_NO_METHOD_EXECUTION
case AML_REGION_OP:
/*
* If we are executing a method, initialize the region
*/
if (walk_state->method_node) {
status =
acpi_ex_create_region(op->named.data,
op->named.length,
(acpi_adr_space_type)
((op->common.value.
arg)->common.value.
integer),
walk_state);
if (ACPI_FAILURE(status)) {
return (status);
}
}
/*
* The op_region is not fully parsed at this time. Only valid
* argument is the space_id. (We must save the address of the
* AML of the address and length operands)
*/
/*
* If we have a valid region, initialize it
* Namespace is NOT locked at this point.
*/
status =
acpi_ev_initialize_region
(acpi_ns_get_attached_object(node), FALSE);
if (ACPI_FAILURE(status)) {
/*
* If AE_NOT_EXIST is returned, it is not fatal
* because many regions get created before a handler
* is installed for said region.
*/
if (AE_NOT_EXIST == status) {
status = AE_OK;
}
}
break;
case AML_NAME_OP:
status = acpi_ds_create_node(walk_state, node, op);
break;
#endif /* ACPI_NO_METHOD_EXECUTION */
default:
/* All NAMED_COMPLEX opcodes must be handled above */
/* Note: Method objects were already created in Pass 1 */
break;
}
break;
case AML_CLASS_INTERNAL:
/* case AML_INT_NAMEPATH_OP: */
break;
case AML_CLASS_METHOD_CALL:
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"RESOLVING-method_call: State=%p Op=%p named_obj=%p\n",
walk_state, op, node));
/*
* Lookup the method name and save the Node
*/
status =
acpi_ns_lookup(walk_state->scope_info,
arg->common.value.string, ACPI_TYPE_ANY,
ACPI_IMODE_LOAD_PASS2,
ACPI_NS_SEARCH_PARENT |
ACPI_NS_DONT_OPEN_SCOPE, walk_state,
&(new_node));
if (ACPI_SUCCESS(status)) {
/*
* Make sure that what we found is indeed a method
* We didn't search for a method on purpose, to see if the name
* would resolve
*/
if (new_node->type != ACPI_TYPE_METHOD) {
status = AE_AML_OPERAND_TYPE;
}
/* We could put the returned object (Node) on the object stack for
* later, but for now, we will put it in the "op" object that the
* parser uses, so we can get it again at the end of this scope
*/
op->common.node = new_node;
} else {
ACPI_REPORT_NSERROR(arg->common.value.string, status);
}
break;
default:
break;
}
cleanup:
/* Remove the Node pushed at the very beginning */
walk_state->operands[0] = NULL;
walk_state->num_operands = 0;
return_ACPI_STATUS(status);
}
Reference in New Issue View Git Blame Copy Permalink