forked from Minki/linux
2f4f58d689
Remote keytables had different names all over the place. Part of the fault is due to a bad naming when rc subsystem was created, but there were lots of old names that were still here. Use a common standard for everything. Patch generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_codes_,rc_map_,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_key_map,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_map_table_size,rc_map_size,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2018 lines
50 KiB
C
2018 lines
50 KiB
C
/* DVB USB compliant linux driver for Conexant USB reference design.
|
|
*
|
|
* The Conexant reference design I saw on their website was only for analogue
|
|
* capturing (using the cx25842). The box I took to write this driver (reverse
|
|
* engineered) is the one labeled Medion MD95700. In addition to the cx25842
|
|
* for analogue capturing it also has a cx22702 DVB-T demodulator on the main
|
|
* board. Besides it has a atiremote (X10) and a USB2.0 hub onboard.
|
|
*
|
|
* Maybe it is a little bit premature to call this driver cxusb, but I assume
|
|
* the USB protocol is identical or at least inherited from the reference
|
|
* design, so it can be reused for the "analogue-only" device (if it will
|
|
* appear at all).
|
|
*
|
|
* TODO: Use the cx25840-driver for the analogue part
|
|
*
|
|
* Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de)
|
|
* Copyright (C) 2006 Michael Krufky (mkrufky@linuxtv.org)
|
|
* Copyright (C) 2006, 2007 Chris Pascoe (c.pascoe@itee.uq.edu.au)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation, version 2.
|
|
*
|
|
* see Documentation/dvb/README.dvb-usb for more information
|
|
*/
|
|
#include <media/tuner.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "cxusb.h"
|
|
|
|
#include "cx22702.h"
|
|
#include "lgdt330x.h"
|
|
#include "mt352.h"
|
|
#include "mt352_priv.h"
|
|
#include "zl10353.h"
|
|
#include "tuner-xc2028.h"
|
|
#include "tuner-simple.h"
|
|
#include "mxl5005s.h"
|
|
#include "max2165.h"
|
|
#include "dib7000p.h"
|
|
#include "dib0070.h"
|
|
#include "lgs8gxx.h"
|
|
#include "atbm8830.h"
|
|
|
|
/* debug */
|
|
static int dvb_usb_cxusb_debug;
|
|
module_param_named(debug, dvb_usb_cxusb_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
#define deb_info(args...) dprintk(dvb_usb_cxusb_debug, 0x03, args)
|
|
#define deb_i2c(args...) dprintk(dvb_usb_cxusb_debug, 0x02, args)
|
|
|
|
static int cxusb_ctrl_msg(struct dvb_usb_device *d,
|
|
u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
|
|
{
|
|
int wo = (rbuf == NULL || rlen == 0); /* write-only */
|
|
u8 sndbuf[1+wlen];
|
|
memset(sndbuf, 0, 1+wlen);
|
|
|
|
sndbuf[0] = cmd;
|
|
memcpy(&sndbuf[1], wbuf, wlen);
|
|
if (wo)
|
|
return dvb_usb_generic_write(d, sndbuf, 1+wlen);
|
|
else
|
|
return dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0);
|
|
}
|
|
|
|
/* GPIO */
|
|
static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
struct cxusb_state *st = d->priv;
|
|
u8 o[2], i;
|
|
|
|
if (st->gpio_write_state[GPIO_TUNER] == onoff)
|
|
return;
|
|
|
|
o[0] = GPIO_TUNER;
|
|
o[1] = onoff;
|
|
cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1);
|
|
|
|
if (i != 0x01)
|
|
deb_info("gpio_write failed.\n");
|
|
|
|
st->gpio_write_state[GPIO_TUNER] = onoff;
|
|
}
|
|
|
|
static int cxusb_bluebird_gpio_rw(struct dvb_usb_device *d, u8 changemask,
|
|
u8 newval)
|
|
{
|
|
u8 o[2], gpio_state;
|
|
int rc;
|
|
|
|
o[0] = 0xff & ~changemask; /* mask of bits to keep */
|
|
o[1] = newval & changemask; /* new values for bits */
|
|
|
|
rc = cxusb_ctrl_msg(d, CMD_BLUEBIRD_GPIO_RW, o, 2, &gpio_state, 1);
|
|
if (rc < 0 || (gpio_state & changemask) != (newval & changemask))
|
|
deb_info("bluebird_gpio_write failed.\n");
|
|
|
|
return rc < 0 ? rc : gpio_state;
|
|
}
|
|
|
|
static void cxusb_bluebird_gpio_pulse(struct dvb_usb_device *d, u8 pin, int low)
|
|
{
|
|
cxusb_bluebird_gpio_rw(d, pin, low ? 0 : pin);
|
|
msleep(5);
|
|
cxusb_bluebird_gpio_rw(d, pin, low ? pin : 0);
|
|
}
|
|
|
|
static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40);
|
|
}
|
|
|
|
static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d,
|
|
u8 addr, int onoff)
|
|
{
|
|
u8 o[2] = {addr, onoff};
|
|
u8 i;
|
|
int rc;
|
|
|
|
rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1);
|
|
|
|
if (rc < 0)
|
|
return rc;
|
|
if (i == 0x01)
|
|
return 0;
|
|
else {
|
|
deb_info("gpio_write failed.\n");
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/* I2C */
|
|
static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
|
|
int num)
|
|
{
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
int i;
|
|
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
|
return -EAGAIN;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
|
|
if (d->udev->descriptor.idVendor == USB_VID_MEDION)
|
|
switch (msg[i].addr) {
|
|
case 0x63:
|
|
cxusb_gpio_tuner(d, 0);
|
|
break;
|
|
default:
|
|
cxusb_gpio_tuner(d, 1);
|
|
break;
|
|
}
|
|
|
|
if (msg[i].flags & I2C_M_RD) {
|
|
/* read only */
|
|
u8 obuf[3], ibuf[1+msg[i].len];
|
|
obuf[0] = 0;
|
|
obuf[1] = msg[i].len;
|
|
obuf[2] = msg[i].addr;
|
|
if (cxusb_ctrl_msg(d, CMD_I2C_READ,
|
|
obuf, 3,
|
|
ibuf, 1+msg[i].len) < 0) {
|
|
warn("i2c read failed");
|
|
break;
|
|
}
|
|
memcpy(msg[i].buf, &ibuf[1], msg[i].len);
|
|
} else if (i+1 < num && (msg[i+1].flags & I2C_M_RD) &&
|
|
msg[i].addr == msg[i+1].addr) {
|
|
/* write to then read from same address */
|
|
u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len];
|
|
obuf[0] = msg[i].len;
|
|
obuf[1] = msg[i+1].len;
|
|
obuf[2] = msg[i].addr;
|
|
memcpy(&obuf[3], msg[i].buf, msg[i].len);
|
|
|
|
if (cxusb_ctrl_msg(d, CMD_I2C_READ,
|
|
obuf, 3+msg[i].len,
|
|
ibuf, 1+msg[i+1].len) < 0)
|
|
break;
|
|
|
|
if (ibuf[0] != 0x08)
|
|
deb_i2c("i2c read may have failed\n");
|
|
|
|
memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
|
|
|
|
i++;
|
|
} else {
|
|
/* write only */
|
|
u8 obuf[2+msg[i].len], ibuf;
|
|
obuf[0] = msg[i].addr;
|
|
obuf[1] = msg[i].len;
|
|
memcpy(&obuf[2], msg[i].buf, msg[i].len);
|
|
|
|
if (cxusb_ctrl_msg(d, CMD_I2C_WRITE, obuf,
|
|
2+msg[i].len, &ibuf,1) < 0)
|
|
break;
|
|
if (ibuf != 0x08)
|
|
deb_i2c("i2c write may have failed\n");
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return i == num ? num : -EREMOTEIO;
|
|
}
|
|
|
|
static u32 cxusb_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C;
|
|
}
|
|
|
|
static struct i2c_algorithm cxusb_i2c_algo = {
|
|
.master_xfer = cxusb_i2c_xfer,
|
|
.functionality = cxusb_i2c_func,
|
|
};
|
|
|
|
static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
u8 b = 0;
|
|
if (onoff)
|
|
return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0);
|
|
else
|
|
return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0);
|
|
}
|
|
|
|
static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
int ret;
|
|
if (!onoff)
|
|
return cxusb_ctrl_msg(d, CMD_POWER_OFF, NULL, 0, NULL, 0);
|
|
if (d->state == DVB_USB_STATE_INIT &&
|
|
usb_set_interface(d->udev, 0, 0) < 0)
|
|
err("set interface failed");
|
|
do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
|
|
!(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
|
|
!(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
|
|
if (!ret) {
|
|
/* FIXME: We don't know why, but we need to configure the
|
|
* lgdt3303 with the register settings below on resume */
|
|
int i;
|
|
u8 buf, bufs[] = {
|
|
0x0e, 0x2, 0x00, 0x7f,
|
|
0x0e, 0x2, 0x02, 0xfe,
|
|
0x0e, 0x2, 0x02, 0x01,
|
|
0x0e, 0x2, 0x00, 0x03,
|
|
0x0e, 0x2, 0x0d, 0x40,
|
|
0x0e, 0x2, 0x0e, 0x87,
|
|
0x0e, 0x2, 0x0f, 0x8e,
|
|
0x0e, 0x2, 0x10, 0x01,
|
|
0x0e, 0x2, 0x14, 0xd7,
|
|
0x0e, 0x2, 0x47, 0x88,
|
|
};
|
|
msleep(20);
|
|
for (i = 0; i < sizeof(bufs)/sizeof(u8); i += 4/sizeof(u8)) {
|
|
ret = cxusb_ctrl_msg(d, CMD_I2C_WRITE,
|
|
bufs+i, 4, &buf, 1);
|
|
if (ret)
|
|
break;
|
|
if (buf != 0x8)
|
|
return -EREMOTEIO;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
u8 b = 0;
|
|
if (onoff)
|
|
return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
int rc = 0;
|
|
|
|
rc = cxusb_power_ctrl(d, onoff);
|
|
if (!onoff)
|
|
cxusb_nano2_led(d, 0);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
int ret;
|
|
u8 b;
|
|
ret = cxusb_power_ctrl(d, onoff);
|
|
if (!onoff)
|
|
return ret;
|
|
|
|
msleep(128);
|
|
cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1);
|
|
msleep(100);
|
|
return ret;
|
|
}
|
|
|
|
static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
|
|
{
|
|
u8 buf[2] = { 0x03, 0x00 };
|
|
if (onoff)
|
|
cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, buf, 2, NULL, 0);
|
|
else
|
|
cxusb_ctrl_msg(adap->dev, CMD_STREAMING_OFF, NULL, 0, NULL, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
|
|
{
|
|
if (onoff)
|
|
cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_ON, NULL, 0, NULL, 0);
|
|
else
|
|
cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_OFF,
|
|
NULL, 0, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d)
|
|
{
|
|
int ep = d->props.generic_bulk_ctrl_endpoint;
|
|
const int timeout = 100;
|
|
const int junk_len = 32;
|
|
u8 *junk;
|
|
int rd_count;
|
|
|
|
/* Discard remaining data in video pipe */
|
|
junk = kmalloc(junk_len, GFP_KERNEL);
|
|
if (!junk)
|
|
return;
|
|
while (1) {
|
|
if (usb_bulk_msg(d->udev,
|
|
usb_rcvbulkpipe(d->udev, ep),
|
|
junk, junk_len, &rd_count, timeout) < 0)
|
|
break;
|
|
if (!rd_count)
|
|
break;
|
|
}
|
|
kfree(junk);
|
|
}
|
|
|
|
static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d)
|
|
{
|
|
struct usb_data_stream_properties *p = &d->props.adapter[0].stream;
|
|
const int timeout = 100;
|
|
const int junk_len = p->u.bulk.buffersize;
|
|
u8 *junk;
|
|
int rd_count;
|
|
|
|
/* Discard remaining data in video pipe */
|
|
junk = kmalloc(junk_len, GFP_KERNEL);
|
|
if (!junk)
|
|
return;
|
|
while (1) {
|
|
if (usb_bulk_msg(d->udev,
|
|
usb_rcvbulkpipe(d->udev, p->endpoint),
|
|
junk, junk_len, &rd_count, timeout) < 0)
|
|
break;
|
|
if (!rd_count)
|
|
break;
|
|
}
|
|
kfree(junk);
|
|
}
|
|
|
|
static int cxusb_d680_dmb_streaming_ctrl(
|
|
struct dvb_usb_adapter *adap, int onoff)
|
|
{
|
|
if (onoff) {
|
|
u8 buf[2] = { 0x03, 0x00 };
|
|
cxusb_d680_dmb_drain_video(adap->dev);
|
|
return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON,
|
|
buf, sizeof(buf), NULL, 0);
|
|
} else {
|
|
int ret = cxusb_ctrl_msg(adap->dev,
|
|
CMD_STREAMING_OFF, NULL, 0, NULL, 0);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
|
|
{
|
|
struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
|
|
u8 ircode[4];
|
|
int i;
|
|
|
|
cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4);
|
|
|
|
*event = 0;
|
|
*state = REMOTE_NO_KEY_PRESSED;
|
|
|
|
for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
|
|
if (rc5_custom(&keymap[i]) == ircode[2] &&
|
|
rc5_data(&keymap[i]) == ircode[3]) {
|
|
*event = keymap[i].keycode;
|
|
*state = REMOTE_KEY_PRESSED;
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
|
|
int *state)
|
|
{
|
|
struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
|
|
u8 ircode[4];
|
|
int i;
|
|
struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD,
|
|
.buf = ircode, .len = 4 };
|
|
|
|
*event = 0;
|
|
*state = REMOTE_NO_KEY_PRESSED;
|
|
|
|
if (cxusb_i2c_xfer(&d->i2c_adap, &msg, 1) != 1)
|
|
return 0;
|
|
|
|
for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
|
|
if (rc5_custom(&keymap[i]) == ircode[1] &&
|
|
rc5_data(&keymap[i]) == ircode[2]) {
|
|
*event = keymap[i].keycode;
|
|
*state = REMOTE_KEY_PRESSED;
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
|
|
int *state)
|
|
{
|
|
struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
|
|
u8 ircode[2];
|
|
int i;
|
|
|
|
*event = 0;
|
|
*state = REMOTE_NO_KEY_PRESSED;
|
|
|
|
if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0)
|
|
return 0;
|
|
|
|
for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
|
|
if (rc5_custom(&keymap[i]) == ircode[0] &&
|
|
rc5_data(&keymap[i]) == ircode[1]) {
|
|
*event = keymap[i].keycode;
|
|
*state = REMOTE_KEY_PRESSED;
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct rc_map_table rc_map_dvico_mce_table[] = {
|
|
{ 0xfe02, KEY_TV },
|
|
{ 0xfe0e, KEY_MP3 },
|
|
{ 0xfe1a, KEY_DVD },
|
|
{ 0xfe1e, KEY_FAVORITES },
|
|
{ 0xfe16, KEY_SETUP },
|
|
{ 0xfe46, KEY_POWER2 },
|
|
{ 0xfe0a, KEY_EPG },
|
|
{ 0xfe49, KEY_BACK },
|
|
{ 0xfe4d, KEY_MENU },
|
|
{ 0xfe51, KEY_UP },
|
|
{ 0xfe5b, KEY_LEFT },
|
|
{ 0xfe5f, KEY_RIGHT },
|
|
{ 0xfe53, KEY_DOWN },
|
|
{ 0xfe5e, KEY_OK },
|
|
{ 0xfe59, KEY_INFO },
|
|
{ 0xfe55, KEY_TAB },
|
|
{ 0xfe0f, KEY_PREVIOUSSONG },/* Replay */
|
|
{ 0xfe12, KEY_NEXTSONG }, /* Skip */
|
|
{ 0xfe42, KEY_ENTER }, /* Windows/Start */
|
|
{ 0xfe15, KEY_VOLUMEUP },
|
|
{ 0xfe05, KEY_VOLUMEDOWN },
|
|
{ 0xfe11, KEY_CHANNELUP },
|
|
{ 0xfe09, KEY_CHANNELDOWN },
|
|
{ 0xfe52, KEY_CAMERA },
|
|
{ 0xfe5a, KEY_TUNER }, /* Live */
|
|
{ 0xfe19, KEY_OPEN },
|
|
{ 0xfe0b, KEY_1 },
|
|
{ 0xfe17, KEY_2 },
|
|
{ 0xfe1b, KEY_3 },
|
|
{ 0xfe07, KEY_4 },
|
|
{ 0xfe50, KEY_5 },
|
|
{ 0xfe54, KEY_6 },
|
|
{ 0xfe48, KEY_7 },
|
|
{ 0xfe4c, KEY_8 },
|
|
{ 0xfe58, KEY_9 },
|
|
{ 0xfe13, KEY_ANGLE }, /* Aspect */
|
|
{ 0xfe03, KEY_0 },
|
|
{ 0xfe1f, KEY_ZOOM },
|
|
{ 0xfe43, KEY_REWIND },
|
|
{ 0xfe47, KEY_PLAYPAUSE },
|
|
{ 0xfe4f, KEY_FASTFORWARD },
|
|
{ 0xfe57, KEY_MUTE },
|
|
{ 0xfe0d, KEY_STOP },
|
|
{ 0xfe01, KEY_RECORD },
|
|
{ 0xfe4e, KEY_POWER },
|
|
};
|
|
|
|
static struct rc_map_table rc_map_dvico_portable_table[] = {
|
|
{ 0xfc02, KEY_SETUP }, /* Profile */
|
|
{ 0xfc43, KEY_POWER2 },
|
|
{ 0xfc06, KEY_EPG },
|
|
{ 0xfc5a, KEY_BACK },
|
|
{ 0xfc05, KEY_MENU },
|
|
{ 0xfc47, KEY_INFO },
|
|
{ 0xfc01, KEY_TAB },
|
|
{ 0xfc42, KEY_PREVIOUSSONG },/* Replay */
|
|
{ 0xfc49, KEY_VOLUMEUP },
|
|
{ 0xfc09, KEY_VOLUMEDOWN },
|
|
{ 0xfc54, KEY_CHANNELUP },
|
|
{ 0xfc0b, KEY_CHANNELDOWN },
|
|
{ 0xfc16, KEY_CAMERA },
|
|
{ 0xfc40, KEY_TUNER }, /* ATV/DTV */
|
|
{ 0xfc45, KEY_OPEN },
|
|
{ 0xfc19, KEY_1 },
|
|
{ 0xfc18, KEY_2 },
|
|
{ 0xfc1b, KEY_3 },
|
|
{ 0xfc1a, KEY_4 },
|
|
{ 0xfc58, KEY_5 },
|
|
{ 0xfc59, KEY_6 },
|
|
{ 0xfc15, KEY_7 },
|
|
{ 0xfc14, KEY_8 },
|
|
{ 0xfc17, KEY_9 },
|
|
{ 0xfc44, KEY_ANGLE }, /* Aspect */
|
|
{ 0xfc55, KEY_0 },
|
|
{ 0xfc07, KEY_ZOOM },
|
|
{ 0xfc0a, KEY_REWIND },
|
|
{ 0xfc08, KEY_PLAYPAUSE },
|
|
{ 0xfc4b, KEY_FASTFORWARD },
|
|
{ 0xfc5b, KEY_MUTE },
|
|
{ 0xfc04, KEY_STOP },
|
|
{ 0xfc56, KEY_RECORD },
|
|
{ 0xfc57, KEY_POWER },
|
|
{ 0xfc41, KEY_UNKNOWN }, /* INPUT */
|
|
{ 0xfc00, KEY_UNKNOWN }, /* HD */
|
|
};
|
|
|
|
static struct rc_map_table rc_map_d680_dmb_table[] = {
|
|
{ 0x0038, KEY_UNKNOWN }, /* TV/AV */
|
|
{ 0x080c, KEY_ZOOM },
|
|
{ 0x0800, KEY_0 },
|
|
{ 0x0001, KEY_1 },
|
|
{ 0x0802, KEY_2 },
|
|
{ 0x0003, KEY_3 },
|
|
{ 0x0804, KEY_4 },
|
|
{ 0x0005, KEY_5 },
|
|
{ 0x0806, KEY_6 },
|
|
{ 0x0007, KEY_7 },
|
|
{ 0x0808, KEY_8 },
|
|
{ 0x0009, KEY_9 },
|
|
{ 0x000a, KEY_MUTE },
|
|
{ 0x0829, KEY_BACK },
|
|
{ 0x0012, KEY_CHANNELUP },
|
|
{ 0x0813, KEY_CHANNELDOWN },
|
|
{ 0x002b, KEY_VOLUMEUP },
|
|
{ 0x082c, KEY_VOLUMEDOWN },
|
|
{ 0x0020, KEY_UP },
|
|
{ 0x0821, KEY_DOWN },
|
|
{ 0x0011, KEY_LEFT },
|
|
{ 0x0810, KEY_RIGHT },
|
|
{ 0x000d, KEY_OK },
|
|
{ 0x081f, KEY_RECORD },
|
|
{ 0x0017, KEY_PLAYPAUSE },
|
|
{ 0x0816, KEY_PLAYPAUSE },
|
|
{ 0x000b, KEY_STOP },
|
|
{ 0x0827, KEY_FASTFORWARD },
|
|
{ 0x0026, KEY_REWIND },
|
|
{ 0x081e, KEY_UNKNOWN }, /* Time Shift */
|
|
{ 0x000e, KEY_UNKNOWN }, /* Snapshot */
|
|
{ 0x082d, KEY_UNKNOWN }, /* Mouse Cursor */
|
|
{ 0x000f, KEY_UNKNOWN }, /* Minimize/Maximize */
|
|
{ 0x0814, KEY_UNKNOWN }, /* Shuffle */
|
|
{ 0x0025, KEY_POWER },
|
|
};
|
|
|
|
static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
|
|
{
|
|
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 };
|
|
static u8 reset [] = { RESET, 0x80 };
|
|
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
|
|
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 };
|
|
static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 };
|
|
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
|
|
|
|
mt352_write(fe, clock_config, sizeof(clock_config));
|
|
udelay(200);
|
|
mt352_write(fe, reset, sizeof(reset));
|
|
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
|
|
|
|
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
|
|
mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
|
|
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
|
|
{ /* used in both lgz201 and th7579 */
|
|
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x29 };
|
|
static u8 reset [] = { RESET, 0x80 };
|
|
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
|
|
static u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 };
|
|
static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 };
|
|
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
|
|
|
|
mt352_write(fe, clock_config, sizeof(clock_config));
|
|
udelay(200);
|
|
mt352_write(fe, reset, sizeof(reset));
|
|
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
|
|
|
|
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
|
|
mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
|
|
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
|
|
return 0;
|
|
}
|
|
|
|
static struct cx22702_config cxusb_cx22702_config = {
|
|
.demod_address = 0x63,
|
|
.output_mode = CX22702_PARALLEL_OUTPUT,
|
|
};
|
|
|
|
static struct lgdt330x_config cxusb_lgdt3303_config = {
|
|
.demod_address = 0x0e,
|
|
.demod_chip = LGDT3303,
|
|
};
|
|
|
|
static struct lgdt330x_config cxusb_aver_lgdt3303_config = {
|
|
.demod_address = 0x0e,
|
|
.demod_chip = LGDT3303,
|
|
.clock_polarity_flip = 2,
|
|
};
|
|
|
|
static struct mt352_config cxusb_dee1601_config = {
|
|
.demod_address = 0x0f,
|
|
.demod_init = cxusb_dee1601_demod_init,
|
|
};
|
|
|
|
static struct zl10353_config cxusb_zl10353_dee1601_config = {
|
|
.demod_address = 0x0f,
|
|
.parallel_ts = 1,
|
|
};
|
|
|
|
static struct mt352_config cxusb_mt352_config = {
|
|
/* used in both lgz201 and th7579 */
|
|
.demod_address = 0x0f,
|
|
.demod_init = cxusb_mt352_demod_init,
|
|
};
|
|
|
|
static struct zl10353_config cxusb_zl10353_xc3028_config = {
|
|
.demod_address = 0x0f,
|
|
.if2 = 45600,
|
|
.no_tuner = 1,
|
|
.parallel_ts = 1,
|
|
};
|
|
|
|
static struct zl10353_config cxusb_zl10353_xc3028_config_no_i2c_gate = {
|
|
.demod_address = 0x0f,
|
|
.if2 = 45600,
|
|
.no_tuner = 1,
|
|
.parallel_ts = 1,
|
|
.disable_i2c_gate_ctrl = 1,
|
|
};
|
|
|
|
static struct mt352_config cxusb_mt352_xc3028_config = {
|
|
.demod_address = 0x0f,
|
|
.if2 = 4560,
|
|
.no_tuner = 1,
|
|
.demod_init = cxusb_mt352_demod_init,
|
|
};
|
|
|
|
/* FIXME: needs tweaking */
|
|
static struct mxl5005s_config aver_a868r_tuner = {
|
|
.i2c_address = 0x63,
|
|
.if_freq = 6000000UL,
|
|
.xtal_freq = CRYSTAL_FREQ_16000000HZ,
|
|
.agc_mode = MXL_SINGLE_AGC,
|
|
.tracking_filter = MXL_TF_C,
|
|
.rssi_enable = MXL_RSSI_ENABLE,
|
|
.cap_select = MXL_CAP_SEL_ENABLE,
|
|
.div_out = MXL_DIV_OUT_4,
|
|
.clock_out = MXL_CLOCK_OUT_DISABLE,
|
|
.output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
|
|
.top = MXL5005S_TOP_25P2,
|
|
.mod_mode = MXL_DIGITAL_MODE,
|
|
.if_mode = MXL_ZERO_IF,
|
|
.AgcMasterByte = 0x00,
|
|
};
|
|
|
|
/* FIXME: needs tweaking */
|
|
static struct mxl5005s_config d680_dmb_tuner = {
|
|
.i2c_address = 0x63,
|
|
.if_freq = 36125000UL,
|
|
.xtal_freq = CRYSTAL_FREQ_16000000HZ,
|
|
.agc_mode = MXL_SINGLE_AGC,
|
|
.tracking_filter = MXL_TF_C,
|
|
.rssi_enable = MXL_RSSI_ENABLE,
|
|
.cap_select = MXL_CAP_SEL_ENABLE,
|
|
.div_out = MXL_DIV_OUT_4,
|
|
.clock_out = MXL_CLOCK_OUT_DISABLE,
|
|
.output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
|
|
.top = MXL5005S_TOP_25P2,
|
|
.mod_mode = MXL_DIGITAL_MODE,
|
|
.if_mode = MXL_ZERO_IF,
|
|
.AgcMasterByte = 0x00,
|
|
};
|
|
|
|
static struct max2165_config mygica_d689_max2165_cfg = {
|
|
.i2c_address = 0x60,
|
|
.osc_clk = 20
|
|
};
|
|
|
|
/* Callbacks for DVB USB */
|
|
static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dvb_attach(simple_tuner_attach, adap->fe,
|
|
&adap->dev->i2c_adap, 0x61,
|
|
TUNER_PHILIPS_FMD1216ME_MK3);
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_dee1601_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dvb_attach(dvb_pll_attach, adap->fe, 0x61,
|
|
NULL, DVB_PLL_THOMSON_DTT7579);
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_lgz201_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dvb_attach(dvb_pll_attach, adap->fe, 0x61, NULL, DVB_PLL_LG_Z201);
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dvb_attach(dvb_pll_attach, adap->fe, 0x60,
|
|
NULL, DVB_PLL_THOMSON_DTT7579);
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dvb_attach(simple_tuner_attach, adap->fe,
|
|
&adap->dev->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF);
|
|
return 0;
|
|
}
|
|
|
|
static int dvico_bluebird_xc2028_callback(void *ptr, int component,
|
|
int command, int arg)
|
|
{
|
|
struct dvb_usb_adapter *adap = ptr;
|
|
struct dvb_usb_device *d = adap->dev;
|
|
|
|
switch (command) {
|
|
case XC2028_TUNER_RESET:
|
|
deb_info("%s: XC2028_TUNER_RESET %d\n", __func__, arg);
|
|
cxusb_bluebird_gpio_pulse(d, 0x01, 1);
|
|
break;
|
|
case XC2028_RESET_CLK:
|
|
deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg);
|
|
break;
|
|
default:
|
|
deb_info("%s: unknown command %d, arg %d\n", __func__,
|
|
command, arg);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dvb_frontend *fe;
|
|
struct xc2028_config cfg = {
|
|
.i2c_adap = &adap->dev->i2c_adap,
|
|
.i2c_addr = 0x61,
|
|
};
|
|
static struct xc2028_ctrl ctl = {
|
|
.fname = XC2028_DEFAULT_FIRMWARE,
|
|
.max_len = 64,
|
|
.demod = XC3028_FE_ZARLINK456,
|
|
};
|
|
|
|
/* FIXME: generalize & move to common area */
|
|
adap->fe->callback = dvico_bluebird_xc2028_callback;
|
|
|
|
fe = dvb_attach(xc2028_attach, adap->fe, &cfg);
|
|
if (fe == NULL || fe->ops.tuner_ops.set_config == NULL)
|
|
return -EIO;
|
|
|
|
fe->ops.tuner_ops.set_config(fe, &ctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dvb_attach(mxl5005s_attach, adap->fe,
|
|
&adap->dev->i2c_adap, &aver_a868r_tuner);
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dvb_frontend *fe;
|
|
fe = dvb_attach(mxl5005s_attach, adap->fe,
|
|
&adap->dev->i2c_adap, &d680_dmb_tuner);
|
|
return (fe == NULL) ? -EIO : 0;
|
|
}
|
|
|
|
static int cxusb_mygica_d689_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dvb_frontend *fe;
|
|
fe = dvb_attach(max2165_attach, adap->fe,
|
|
&adap->dev->i2c_adap, &mygica_d689_max2165_cfg);
|
|
return (fe == NULL) ? -EIO : 0;
|
|
}
|
|
|
|
static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
u8 b;
|
|
if (usb_set_interface(adap->dev->udev, 0, 6) < 0)
|
|
err("set interface failed");
|
|
|
|
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, &b, 1);
|
|
|
|
if ((adap->fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config,
|
|
&adap->dev->i2c_adap)) != NULL)
|
|
return 0;
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
if (usb_set_interface(adap->dev->udev, 0, 7) < 0)
|
|
err("set interface failed");
|
|
|
|
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
|
|
|
|
if ((adap->fe = dvb_attach(lgdt330x_attach, &cxusb_lgdt3303_config,
|
|
&adap->dev->i2c_adap)) != NULL)
|
|
return 0;
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
adap->fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config,
|
|
&adap->dev->i2c_adap);
|
|
if (adap->fe != NULL)
|
|
return 0;
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
/* used in both lgz201 and th7579 */
|
|
if (usb_set_interface(adap->dev->udev, 0, 0) < 0)
|
|
err("set interface failed");
|
|
|
|
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
|
|
|
|
if ((adap->fe = dvb_attach(mt352_attach, &cxusb_mt352_config,
|
|
&adap->dev->i2c_adap)) != NULL)
|
|
return 0;
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int cxusb_dee1601_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
if (usb_set_interface(adap->dev->udev, 0, 0) < 0)
|
|
err("set interface failed");
|
|
|
|
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
|
|
|
|
if (((adap->fe = dvb_attach(mt352_attach, &cxusb_dee1601_config,
|
|
&adap->dev->i2c_adap)) != NULL) ||
|
|
((adap->fe = dvb_attach(zl10353_attach,
|
|
&cxusb_zl10353_dee1601_config,
|
|
&adap->dev->i2c_adap)) != NULL))
|
|
return 0;
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
u8 ircode[4];
|
|
int i;
|
|
struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD,
|
|
.buf = ircode, .len = 4 };
|
|
|
|
if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
|
|
err("set interface failed");
|
|
|
|
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
|
|
|
|
/* reset the tuner and demodulator */
|
|
cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0);
|
|
cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1);
|
|
cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
|
|
|
|
if ((adap->fe = dvb_attach(zl10353_attach,
|
|
&cxusb_zl10353_xc3028_config_no_i2c_gate,
|
|
&adap->dev->i2c_adap)) == NULL)
|
|
return -EIO;
|
|
|
|
/* try to determine if there is no IR decoder on the I2C bus */
|
|
for (i = 0; adap->dev->props.rc.legacy.rc_map_table != NULL && i < 5; i++) {
|
|
msleep(20);
|
|
if (cxusb_i2c_xfer(&adap->dev->i2c_adap, &msg, 1) != 1)
|
|
goto no_IR;
|
|
if (ircode[0] == 0 && ircode[1] == 0)
|
|
continue;
|
|
if (ircode[2] + ircode[3] != 0xff) {
|
|
no_IR:
|
|
adap->dev->props.rc.legacy.rc_map_table = NULL;
|
|
info("No IR receiver detected on this device.");
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dibx000_agc_config dib7070_agc_config = {
|
|
.band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
|
|
|
|
/*
|
|
* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5,
|
|
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
|
|
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0
|
|
*/
|
|
.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) |
|
|
(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
|
|
.inv_gain = 600,
|
|
.time_stabiliz = 10,
|
|
.alpha_level = 0,
|
|
.thlock = 118,
|
|
.wbd_inv = 0,
|
|
.wbd_ref = 3530,
|
|
.wbd_sel = 1,
|
|
.wbd_alpha = 5,
|
|
.agc1_max = 65535,
|
|
.agc1_min = 0,
|
|
.agc2_max = 65535,
|
|
.agc2_min = 0,
|
|
.agc1_pt1 = 0,
|
|
.agc1_pt2 = 40,
|
|
.agc1_pt3 = 183,
|
|
.agc1_slope1 = 206,
|
|
.agc1_slope2 = 255,
|
|
.agc2_pt1 = 72,
|
|
.agc2_pt2 = 152,
|
|
.agc2_slope1 = 88,
|
|
.agc2_slope2 = 90,
|
|
.alpha_mant = 17,
|
|
.alpha_exp = 27,
|
|
.beta_mant = 23,
|
|
.beta_exp = 51,
|
|
.perform_agc_softsplit = 0,
|
|
};
|
|
|
|
static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
|
|
.internal = 60000,
|
|
.sampling = 15000,
|
|
.pll_prediv = 1,
|
|
.pll_ratio = 20,
|
|
.pll_range = 3,
|
|
.pll_reset = 1,
|
|
.pll_bypass = 0,
|
|
.enable_refdiv = 0,
|
|
.bypclk_div = 0,
|
|
.IO_CLK_en_core = 1,
|
|
.ADClkSrc = 1,
|
|
.modulo = 2,
|
|
/* refsel, sel, freq_15k */
|
|
.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
|
|
.ifreq = (0 << 25) | 0,
|
|
.timf = 20452225,
|
|
.xtal_hz = 12000000,
|
|
};
|
|
|
|
static struct dib7000p_config cxusb_dualdig4_rev2_config = {
|
|
.output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &dib7070_agc_config,
|
|
.bw = &dib7070_bw_config_12_mhz,
|
|
.tuner_is_baseband = 1,
|
|
.spur_protect = 1,
|
|
|
|
.gpio_dir = 0xfcef,
|
|
.gpio_val = 0x0110,
|
|
|
|
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
|
|
|
.hostbus_diversity = 1,
|
|
};
|
|
|
|
static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
|
|
err("set interface failed");
|
|
|
|
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
|
|
|
|
cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
|
|
|
|
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
|
|
&cxusb_dualdig4_rev2_config) < 0) {
|
|
printk(KERN_WARNING "Unable to enumerate dib7000p\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
|
|
&cxusb_dualdig4_rev2_config);
|
|
if (adap->fe == NULL)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
return dib7000p_set_gpio(fe, 8, 0, !onoff);
|
|
}
|
|
|
|
static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct dib0070_config dib7070p_dib0070_config = {
|
|
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
|
|
.reset = dib7070_tuner_reset,
|
|
.sleep = dib7070_tuner_sleep,
|
|
.clock_khz = 12000,
|
|
};
|
|
|
|
struct dib0700_adapter_state {
|
|
int (*set_param_save) (struct dvb_frontend *,
|
|
struct dvb_frontend_parameters *);
|
|
};
|
|
|
|
static int dib7070_set_param_override(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe->dvb->priv;
|
|
struct dib0700_adapter_state *state = adap->priv;
|
|
|
|
u16 offset;
|
|
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
|
|
switch (band) {
|
|
case BAND_VHF: offset = 950; break;
|
|
default:
|
|
case BAND_UHF: offset = 550; break;
|
|
}
|
|
|
|
dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
|
|
|
|
return state->set_param_save(fe, fep);
|
|
}
|
|
|
|
static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_adapter_state *st = adap->priv;
|
|
struct i2c_adapter *tun_i2c =
|
|
dib7000p_get_i2c_master(adap->fe,
|
|
DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
|
|
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
|
|
&dib7070p_dib0070_config) == NULL)
|
|
return -ENODEV;
|
|
|
|
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
|
|
adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
|
|
return 0;
|
|
}
|
|
|
|
static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
|
|
err("set interface failed");
|
|
|
|
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
|
|
|
|
/* reset the tuner and demodulator */
|
|
cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0);
|
|
cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1);
|
|
cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
|
|
|
|
if ((adap->fe = dvb_attach(zl10353_attach,
|
|
&cxusb_zl10353_xc3028_config,
|
|
&adap->dev->i2c_adap)) != NULL)
|
|
return 0;
|
|
|
|
if ((adap->fe = dvb_attach(mt352_attach,
|
|
&cxusb_mt352_xc3028_config,
|
|
&adap->dev->i2c_adap)) != NULL)
|
|
return 0;
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static struct lgs8gxx_config d680_lgs8gl5_cfg = {
|
|
.prod = LGS8GXX_PROD_LGS8GL5,
|
|
.demod_address = 0x19,
|
|
.serial_ts = 0,
|
|
.ts_clk_pol = 0,
|
|
.ts_clk_gated = 1,
|
|
.if_clk_freq = 30400, /* 30.4 MHz */
|
|
.if_freq = 5725, /* 5.725 MHz */
|
|
.if_neg_center = 0,
|
|
.ext_adc = 0,
|
|
.adc_signed = 0,
|
|
.if_neg_edge = 0,
|
|
};
|
|
|
|
static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dvb_usb_device *d = adap->dev;
|
|
int n;
|
|
|
|
/* Select required USB configuration */
|
|
if (usb_set_interface(d->udev, 0, 0) < 0)
|
|
err("set interface failed");
|
|
|
|
/* Unblock all USB pipes */
|
|
usb_clear_halt(d->udev,
|
|
usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
|
|
usb_clear_halt(d->udev,
|
|
usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
|
|
usb_clear_halt(d->udev,
|
|
usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint));
|
|
|
|
/* Drain USB pipes to avoid hang after reboot */
|
|
for (n = 0; n < 5; n++) {
|
|
cxusb_d680_dmb_drain_message(d);
|
|
cxusb_d680_dmb_drain_video(d);
|
|
msleep(200);
|
|
}
|
|
|
|
/* Reset the tuner */
|
|
if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) {
|
|
err("clear tuner gpio failed");
|
|
return -EIO;
|
|
}
|
|
msleep(100);
|
|
if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) {
|
|
err("set tuner gpio failed");
|
|
return -EIO;
|
|
}
|
|
msleep(100);
|
|
|
|
/* Attach frontend */
|
|
adap->fe = dvb_attach(lgs8gxx_attach, &d680_lgs8gl5_cfg, &d->i2c_adap);
|
|
if (adap->fe == NULL)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct atbm8830_config mygica_d689_atbm8830_cfg = {
|
|
.prod = ATBM8830_PROD_8830,
|
|
.demod_address = 0x40,
|
|
.serial_ts = 0,
|
|
.ts_sampling_edge = 1,
|
|
.ts_clk_gated = 0,
|
|
.osc_clk_freq = 30400, /* in kHz */
|
|
.if_freq = 0, /* zero IF */
|
|
.zif_swap_iq = 1,
|
|
.agc_min = 0x2E,
|
|
.agc_max = 0x90,
|
|
.agc_hold_loop = 0,
|
|
};
|
|
|
|
static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dvb_usb_device *d = adap->dev;
|
|
|
|
/* Select required USB configuration */
|
|
if (usb_set_interface(d->udev, 0, 0) < 0)
|
|
err("set interface failed");
|
|
|
|
/* Unblock all USB pipes */
|
|
usb_clear_halt(d->udev,
|
|
usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
|
|
usb_clear_halt(d->udev,
|
|
usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
|
|
usb_clear_halt(d->udev,
|
|
usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint));
|
|
|
|
|
|
/* Reset the tuner */
|
|
if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) {
|
|
err("clear tuner gpio failed");
|
|
return -EIO;
|
|
}
|
|
msleep(100);
|
|
if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) {
|
|
err("set tuner gpio failed");
|
|
return -EIO;
|
|
}
|
|
msleep(100);
|
|
|
|
/* Attach frontend */
|
|
adap->fe = dvb_attach(atbm8830_attach, &mygica_d689_atbm8830_cfg,
|
|
&d->i2c_adap);
|
|
if (adap->fe == NULL)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* DViCO has shipped two devices with the same USB ID, but only one of them
|
|
* needs a firmware download. Check the device class details to see if they
|
|
* have non-default values to decide whether the device is actually cold or
|
|
* not, and forget a match if it turns out we selected the wrong device.
|
|
*/
|
|
static int bluebird_fx2_identify_state(struct usb_device *udev,
|
|
struct dvb_usb_device_properties *props,
|
|
struct dvb_usb_device_description **desc,
|
|
int *cold)
|
|
{
|
|
int wascold = *cold;
|
|
|
|
*cold = udev->descriptor.bDeviceClass == 0xff &&
|
|
udev->descriptor.bDeviceSubClass == 0xff &&
|
|
udev->descriptor.bDeviceProtocol == 0xff;
|
|
|
|
if (*cold && !wascold)
|
|
*desc = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* DViCO bluebird firmware needs the "warm" product ID to be patched into the
|
|
* firmware file before download.
|
|
*/
|
|
|
|
static const int dvico_firmware_id_offsets[] = { 6638, 3204 };
|
|
static int bluebird_patch_dvico_firmware_download(struct usb_device *udev,
|
|
const struct firmware *fw)
|
|
{
|
|
int pos;
|
|
|
|
for (pos = 0; pos < ARRAY_SIZE(dvico_firmware_id_offsets); pos++) {
|
|
int idoff = dvico_firmware_id_offsets[pos];
|
|
|
|
if (fw->size < idoff + 4)
|
|
continue;
|
|
|
|
if (fw->data[idoff] == (USB_VID_DVICO & 0xff) &&
|
|
fw->data[idoff + 1] == USB_VID_DVICO >> 8) {
|
|
struct firmware new_fw;
|
|
u8 *new_fw_data = vmalloc(fw->size);
|
|
int ret;
|
|
|
|
if (!new_fw_data)
|
|
return -ENOMEM;
|
|
|
|
memcpy(new_fw_data, fw->data, fw->size);
|
|
new_fw.size = fw->size;
|
|
new_fw.data = new_fw_data;
|
|
|
|
new_fw_data[idoff + 2] =
|
|
le16_to_cpu(udev->descriptor.idProduct) + 1;
|
|
new_fw_data[idoff + 3] =
|
|
le16_to_cpu(udev->descriptor.idProduct) >> 8;
|
|
|
|
ret = usb_cypress_load_firmware(udev, &new_fw,
|
|
CYPRESS_FX2);
|
|
vfree(new_fw_data);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* DVB USB Driver stuff */
|
|
static struct dvb_usb_device_properties cxusb_medion_properties;
|
|
static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties;
|
|
static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties;
|
|
static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties;
|
|
static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties;
|
|
static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties;
|
|
static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties;
|
|
static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties;
|
|
static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
|
|
static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
|
|
static struct dvb_usb_device_properties cxusb_d680_dmb_properties;
|
|
static struct dvb_usb_device_properties cxusb_mygica_d689_properties;
|
|
|
|
static int cxusb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf,
|
|
&cxusb_bluebird_nano2_needsfirmware_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf,
|
|
&cxusb_bluebird_dualdig4_rev2_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0)
|
|
return 0;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct usb_device_id cxusb_table [] = {
|
|
{ USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) },
|
|
{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
|
|
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) },
|
|
{ USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) },
|
|
{ USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) },
|
|
{} /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE (usb, cxusb_table);
|
|
|
|
static struct dvb_usb_device_properties cxusb_medion_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_streaming_ctrl,
|
|
.frontend_attach = cxusb_cx22702_frontend_attach,
|
|
.tuner_attach = cxusb_fmd1216me_tuner_attach,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x02,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
|
|
},
|
|
},
|
|
.power_ctrl = cxusb_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "Medion MD95700 (MDUSBTV-HYBRID)",
|
|
{ NULL },
|
|
{ &cxusb_table[0], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = DEVICE_SPECIFIC,
|
|
.firmware = "dvb-usb-bluebird-01.fw",
|
|
.download_firmware = bluebird_patch_dvico_firmware_download,
|
|
/* use usb alt setting 0 for EP4 transfer (dvb-t),
|
|
use usb alt setting 7 for EP2 transfer (atsc) */
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_streaming_ctrl,
|
|
.frontend_attach = cxusb_lgdt3303_frontend_attach,
|
|
.tuner_attach = cxusb_lgh064f_tuner_attach,
|
|
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x02,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
|
|
.power_ctrl = cxusb_bluebird_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 100,
|
|
.rc_map_table = rc_map_dvico_portable_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table),
|
|
.rc_query = cxusb_rc_query,
|
|
},
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "DViCO FusionHDTV5 USB Gold",
|
|
{ &cxusb_table[1], NULL },
|
|
{ &cxusb_table[2], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = DEVICE_SPECIFIC,
|
|
.firmware = "dvb-usb-bluebird-01.fw",
|
|
.download_firmware = bluebird_patch_dvico_firmware_download,
|
|
/* use usb alt setting 0 for EP4 transfer (dvb-t),
|
|
use usb alt setting 7 for EP2 transfer (atsc) */
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_streaming_ctrl,
|
|
.frontend_attach = cxusb_dee1601_frontend_attach,
|
|
.tuner_attach = cxusb_dee1601_tuner_attach,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x04,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
|
|
.power_ctrl = cxusb_bluebird_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 150,
|
|
.rc_map_table = rc_map_dvico_mce_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_dvico_mce_table),
|
|
.rc_query = cxusb_rc_query,
|
|
},
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.num_device_descs = 3,
|
|
.devices = {
|
|
{ "DViCO FusionHDTV DVB-T Dual USB",
|
|
{ &cxusb_table[3], NULL },
|
|
{ &cxusb_table[4], NULL },
|
|
},
|
|
{ "DigitalNow DVB-T Dual USB",
|
|
{ &cxusb_table[9], NULL },
|
|
{ &cxusb_table[10], NULL },
|
|
},
|
|
{ "DViCO FusionHDTV DVB-T Dual Digital 2",
|
|
{ &cxusb_table[11], NULL },
|
|
{ &cxusb_table[12], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = DEVICE_SPECIFIC,
|
|
.firmware = "dvb-usb-bluebird-01.fw",
|
|
.download_firmware = bluebird_patch_dvico_firmware_download,
|
|
/* use usb alt setting 0 for EP4 transfer (dvb-t),
|
|
use usb alt setting 7 for EP2 transfer (atsc) */
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 2,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_streaming_ctrl,
|
|
.frontend_attach = cxusb_mt352_frontend_attach,
|
|
.tuner_attach = cxusb_lgz201_tuner_attach,
|
|
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x04,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
.power_ctrl = cxusb_bluebird_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 100,
|
|
.rc_map_table = rc_map_dvico_portable_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table),
|
|
.rc_query = cxusb_rc_query,
|
|
},
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "DViCO FusionHDTV DVB-T USB (LGZ201)",
|
|
{ &cxusb_table[5], NULL },
|
|
{ &cxusb_table[6], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = DEVICE_SPECIFIC,
|
|
.firmware = "dvb-usb-bluebird-01.fw",
|
|
.download_firmware = bluebird_patch_dvico_firmware_download,
|
|
/* use usb alt setting 0 for EP4 transfer (dvb-t),
|
|
use usb alt setting 7 for EP2 transfer (atsc) */
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_streaming_ctrl,
|
|
.frontend_attach = cxusb_mt352_frontend_attach,
|
|
.tuner_attach = cxusb_dtt7579_tuner_attach,
|
|
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x04,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
.power_ctrl = cxusb_bluebird_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 100,
|
|
.rc_map_table = rc_map_dvico_portable_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table),
|
|
.rc_query = cxusb_rc_query,
|
|
},
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "DViCO FusionHDTV DVB-T USB (TH7579)",
|
|
{ &cxusb_table[7], NULL },
|
|
{ &cxusb_table[8], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_streaming_ctrl,
|
|
.frontend_attach = cxusb_dualdig4_frontend_attach,
|
|
.tuner_attach = cxusb_dvico_xc3028_tuner_attach,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x02,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
|
|
.power_ctrl = cxusb_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 100,
|
|
.rc_map_table = rc_map_dvico_mce_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_dvico_mce_table),
|
|
.rc_query = cxusb_bluebird2_rc_query,
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "DViCO FusionHDTV DVB-T Dual Digital 4",
|
|
{ NULL },
|
|
{ &cxusb_table[13], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
.identify_state = bluebird_fx2_identify_state,
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_streaming_ctrl,
|
|
.frontend_attach = cxusb_nano2_frontend_attach,
|
|
.tuner_attach = cxusb_dvico_xc3028_tuner_attach,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x02,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
|
|
.power_ctrl = cxusb_nano2_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 100,
|
|
.rc_map_table = rc_map_dvico_portable_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table),
|
|
.rc_query = cxusb_bluebird2_rc_query,
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "DViCO FusionHDTV DVB-T NANO2",
|
|
{ NULL },
|
|
{ &cxusb_table[14], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = DEVICE_SPECIFIC,
|
|
.firmware = "dvb-usb-bluebird-02.fw",
|
|
.download_firmware = bluebird_patch_dvico_firmware_download,
|
|
.identify_state = bluebird_fx2_identify_state,
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_streaming_ctrl,
|
|
.frontend_attach = cxusb_nano2_frontend_attach,
|
|
.tuner_attach = cxusb_dvico_xc3028_tuner_attach,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x02,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
|
|
.power_ctrl = cxusb_nano2_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 100,
|
|
.rc_map_table = rc_map_dvico_portable_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table),
|
|
.rc_query = cxusb_rc_query,
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "DViCO FusionHDTV DVB-T NANO2 w/o firmware",
|
|
{ &cxusb_table[14], NULL },
|
|
{ &cxusb_table[15], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_aver_a868r_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_aver_streaming_ctrl,
|
|
.frontend_attach = cxusb_aver_lgdt3303_frontend_attach,
|
|
.tuner_attach = cxusb_mxl5003s_tuner_attach,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x04,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
|
|
},
|
|
},
|
|
.power_ctrl = cxusb_aver_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "AVerMedia AVerTVHD Volar (A868R)",
|
|
{ NULL },
|
|
{ &cxusb_table[16], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static
|
|
struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_streaming_ctrl,
|
|
.frontend_attach = cxusb_dualdig4_rev2_frontend_attach,
|
|
.tuner_attach = cxusb_dualdig4_rev2_tuner_attach,
|
|
.size_of_priv = sizeof(struct dib0700_adapter_state),
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 7,
|
|
.endpoint = 0x02,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 4096,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
|
|
.power_ctrl = cxusb_bluebird_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 100,
|
|
.rc_map_table = rc_map_dvico_mce_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_dvico_mce_table),
|
|
.rc_query = cxusb_rc_query,
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)",
|
|
{ NULL },
|
|
{ &cxusb_table[17], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_d680_dmb_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_d680_dmb_streaming_ctrl,
|
|
.frontend_attach = cxusb_d680_dmb_frontend_attach,
|
|
.tuner_attach = cxusb_d680_dmb_tuner_attach,
|
|
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x02,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
|
|
.power_ctrl = cxusb_d680_dmb_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 100,
|
|
.rc_map_table = rc_map_d680_dmb_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_d680_dmb_table),
|
|
.rc_query = cxusb_d680_dmb_rc_query,
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{
|
|
"Conexant DMB-TH Stick",
|
|
{ NULL },
|
|
{ &cxusb_table[18], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties cxusb_mygica_d689_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
|
|
.size_of_priv = sizeof(struct cxusb_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = cxusb_d680_dmb_streaming_ctrl,
|
|
.frontend_attach = cxusb_mygica_d689_frontend_attach,
|
|
.tuner_attach = cxusb_mygica_d689_tuner_attach,
|
|
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 5,
|
|
.endpoint = 0x02,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
},
|
|
},
|
|
|
|
.power_ctrl = cxusb_d680_dmb_power_ctrl,
|
|
|
|
.i2c_algo = &cxusb_i2c_algo,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.rc.legacy = {
|
|
.rc_interval = 100,
|
|
.rc_map_table = rc_map_d680_dmb_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_d680_dmb_table),
|
|
.rc_query = cxusb_d680_dmb_rc_query,
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{
|
|
"Mygica D689 DMB-TH",
|
|
{ NULL },
|
|
{ &cxusb_table[19], NULL },
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct usb_driver cxusb_driver = {
|
|
.name = "dvb_usb_cxusb",
|
|
.probe = cxusb_probe,
|
|
.disconnect = dvb_usb_device_exit,
|
|
.id_table = cxusb_table,
|
|
};
|
|
|
|
/* module stuff */
|
|
static int __init cxusb_module_init(void)
|
|
{
|
|
int result;
|
|
if ((result = usb_register(&cxusb_driver))) {
|
|
err("usb_register failed. Error number %d",result);
|
|
return result;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit cxusb_module_exit(void)
|
|
{
|
|
/* deregister this driver from the USB subsystem */
|
|
usb_deregister(&cxusb_driver);
|
|
}
|
|
|
|
module_init (cxusb_module_init);
|
|
module_exit (cxusb_module_exit);
|
|
|
|
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
|
|
MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
|
|
MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
|
|
MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design");
|
|
MODULE_VERSION("1.0-alpha");
|
|
MODULE_LICENSE("GPL");
|