forked from Minki/linux
69bec72598
Although most of USB devices are hot-plug's, there are still some devices are hard wired on the board, eg, for HSIC and SSIC interface USB devices. If these kinds of USB devices are multiple functions, and they can supply other interfaces like i2c, gpios for other devices, we may need to describe these at device tree. In this commit, it uses "reg" in dts as physical port number to match the phyiscal port number decided by USB core, if they are the same, then the device node is for the device we are creating for USB core. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
29 lines
729 B
Plaintext
29 lines
729 B
Plaintext
Generic USB Device Properties
|
|
|
|
Usually, we only use device tree for hard wired USB device.
|
|
The reference binding doc is from:
|
|
http://www.firmware.org/1275/bindings/usb/usb-1_0.ps
|
|
|
|
Required properties:
|
|
- compatible: usbVID,PID. The textual representation of VID, PID shall
|
|
be in lower case hexadecimal with leading zeroes suppressed. The
|
|
other compatible strings from the above standard binding could also
|
|
be used, but a device adhering to this binding may leave out all except
|
|
for usbVID,PID.
|
|
- reg: the port number which this device is connecting to, the range
|
|
is 1-31.
|
|
|
|
Example:
|
|
|
|
&usb1 {
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hub: genesys@1 {
|
|
compatible = "usb5e3,608";
|
|
reg = <1>;
|
|
};
|
|
}
|