linux/drivers/tty/serial/8250/8250_early.c
Douglas Anderson c5e7467d92 serial: 8250_early: Support kgdboc_earlycon
Implement the read() function in the early console driver.  With
recent kgdb patches this allows you to use kgdb to debug fairly early
into the system boot.

We only bother implementing this if polling is enabled since kgdb
can't be enabled without that.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.11.I8f668556c244776523320a95b09373a86eda11b7@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2020-06-02 15:15:46 +01:00

221 lines
6.0 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Early serial console for 8250/16550 devices
*
* (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
* Bjorn Helgaas <bjorn.helgaas@hp.com>
*
* Based on the 8250.c serial driver, Copyright (C) 2001 Russell King,
* and on early_printk.c by Andi Kleen.
*
* This is for use before the serial driver has initialized, in
* particular, before the UARTs have been discovered and named.
* Instead of specifying the console device as, e.g., "ttyS0",
* we locate the device directly by its MMIO or I/O port address.
*
* The user can specify the device directly, e.g.,
* earlycon=uart8250,io,0x3f8,9600n8
* earlycon=uart8250,mmio,0xff5e0000,115200n8
* earlycon=uart8250,mmio32,0xff5e0000,115200n8
* or
* console=uart8250,io,0x3f8,9600n8
* console=uart8250,mmio,0xff5e0000,115200n8
* console=uart8250,mmio32,0xff5e0000,115200n8
*/
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/serial_reg.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/serial.h>
static unsigned int serial8250_early_in(struct uart_port *port, int offset)
{
int reg_offset = offset;
offset <<= port->regshift;
switch (port->iotype) {
case UPIO_MEM:
return readb(port->membase + offset);
case UPIO_MEM16:
return readw(port->membase + offset);
case UPIO_MEM32:
return readl(port->membase + offset);
case UPIO_MEM32BE:
return ioread32be(port->membase + offset);
case UPIO_PORT:
return inb(port->iobase + offset);
case UPIO_AU:
return port->serial_in(port, reg_offset);
default:
return 0;
}
}
static void serial8250_early_out(struct uart_port *port, int offset, int value)
{
int reg_offset = offset;
offset <<= port->regshift;
switch (port->iotype) {
case UPIO_MEM:
writeb(value, port->membase + offset);
break;
case UPIO_MEM16:
writew(value, port->membase + offset);
break;
case UPIO_MEM32:
writel(value, port->membase + offset);
break;
case UPIO_MEM32BE:
iowrite32be(value, port->membase + offset);
break;
case UPIO_PORT:
outb(value, port->iobase + offset);
break;
case UPIO_AU:
port->serial_out(port, reg_offset, value);
break;
}
}
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
static void serial_putc(struct uart_port *port, int c)
{
unsigned int status;
serial8250_early_out(port, UART_TX, c);
for (;;) {
status = serial8250_early_in(port, UART_LSR);
if ((status & BOTH_EMPTY) == BOTH_EMPTY)
break;
cpu_relax();
}
}
static void early_serial8250_write(struct console *console,
const char *s, unsigned int count)
{
struct earlycon_device *device = console->data;
struct uart_port *port = &device->port;
uart_console_write(port, s, count, serial_putc);
}
#ifdef CONFIG_CONSOLE_POLL
static int early_serial8250_read(struct console *console,
char *s, unsigned int count)
{
struct earlycon_device *device = console->data;
struct uart_port *port = &device->port;
unsigned int status;
int num_read = 0;
while (num_read < count) {
status = serial8250_early_in(port, UART_LSR);
if (!(status & UART_LSR_DR))
break;
s[num_read++] = serial8250_early_in(port, UART_RX);
}
return num_read;
}
#else
#define early_serial8250_read NULL
#endif
static void __init init_port(struct earlycon_device *device)
{
struct uart_port *port = &device->port;
unsigned int divisor;
unsigned char c;
unsigned int ier;
serial8250_early_out(port, UART_LCR, 0x3); /* 8n1 */
ier = serial8250_early_in(port, UART_IER);
serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */
serial8250_early_out(port, UART_FCR, 0); /* no fifo */
serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */
if (port->uartclk) {
divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
c = serial8250_early_in(port, UART_LCR);
serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
serial8250_early_out(port, UART_DLL, divisor & 0xff);
serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff);
serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
}
}
int __init early_serial8250_setup(struct earlycon_device *device,
const char *options)
{
if (!(device->port.membase || device->port.iobase))
return -ENODEV;
if (!device->baud) {
struct uart_port *port = &device->port;
unsigned int ier;
/* assume the device was initialized, only mask interrupts */
ier = serial8250_early_in(port, UART_IER);
serial8250_early_out(port, UART_IER, ier & UART_IER_UUE);
} else
init_port(device);
device->con->write = early_serial8250_write;
device->con->read = early_serial8250_read;
return 0;
}
EARLYCON_DECLARE(uart8250, early_serial8250_setup);
EARLYCON_DECLARE(uart, early_serial8250_setup);
OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup);
OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
OF_EARLYCON_DECLARE(uart, "nvidia,tegra20-uart", early_serial8250_setup);
OF_EARLYCON_DECLARE(uart, "snps,dw-apb-uart", early_serial8250_setup);
#ifdef CONFIG_SERIAL_8250_OMAP
static int __init early_omap8250_setup(struct earlycon_device *device,
const char *options)
{
struct uart_port *port = &device->port;
if (!(device->port.membase || device->port.iobase))
return -ENODEV;
port->regshift = 2;
device->con->write = early_serial8250_write;
return 0;
}
OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
#endif
#ifdef CONFIG_SERIAL_8250_RT288X
unsigned int au_serial_in(struct uart_port *p, int offset);
void au_serial_out(struct uart_port *p, int offset, int value);
static int __init early_au_setup(struct earlycon_device *dev, const char *opt)
{
dev->port.serial_in = au_serial_in;
dev->port.serial_out = au_serial_out;
dev->port.iotype = UPIO_AU;
dev->con->write = early_serial8250_write;
return 0;
}
OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup);
#endif