forked from Minki/linux
280a727505
This voltage domain (a.k.a. VDD1) contains both the MPU and the IVA, so rename appropriately. Also fixup any users of the "mpu" name to use "mpu_iva" Signed-off-by: Kevin Hilman <khilman@ti.com>
340 lines
10 KiB
C
340 lines
10 KiB
C
/**
|
|
* OMAP and TWL PMIC specific intializations.
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments Incorporated.
|
|
* Thara Gopinath
|
|
* Copyright (C) 2009 Texas Instruments Incorporated.
|
|
* Nishanth Menon
|
|
* Copyright (C) 2009 Nokia Corporation
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/i2c/twl.h>
|
|
|
|
#include "voltage.h"
|
|
|
|
#include "pm.h"
|
|
|
|
#define OMAP3_SRI2C_SLAVE_ADDR 0x12
|
|
#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
|
|
#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
|
|
#define OMAP3_VP_CONFIG_ERROROFFSET 0x00
|
|
#define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1
|
|
#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
|
|
#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
|
|
|
|
#define OMAP3430_VP1_VLIMITTO_VDDMIN 0x14
|
|
#define OMAP3430_VP1_VLIMITTO_VDDMAX 0x42
|
|
#define OMAP3430_VP2_VLIMITTO_VDDMIN 0x18
|
|
#define OMAP3430_VP2_VLIMITTO_VDDMAX 0x2c
|
|
|
|
#define OMAP3630_VP1_VLIMITTO_VDDMIN 0x18
|
|
#define OMAP3630_VP1_VLIMITTO_VDDMAX 0x3c
|
|
#define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18
|
|
#define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30
|
|
|
|
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
|
|
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
|
|
#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
|
|
#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
|
|
|
|
#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
|
|
#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
|
|
#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04
|
|
#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200
|
|
|
|
#define OMAP4_VP_MPU_VLIMITTO_VDDMIN 0xA
|
|
#define OMAP4_VP_MPU_VLIMITTO_VDDMAX 0x39
|
|
#define OMAP4_VP_IVA_VLIMITTO_VDDMIN 0xA
|
|
#define OMAP4_VP_IVA_VLIMITTO_VDDMAX 0x2D
|
|
#define OMAP4_VP_CORE_VLIMITTO_VDDMIN 0xA
|
|
#define OMAP4_VP_CORE_VLIMITTO_VDDMAX 0x28
|
|
|
|
static bool is_offset_valid;
|
|
static u8 smps_offset;
|
|
/*
|
|
* Flag to ensure Smartreflex bit in TWL
|
|
* being cleared in board file is not overwritten.
|
|
*/
|
|
static bool __initdata twl_sr_enable_autoinit;
|
|
|
|
#define TWL4030_DCDC_GLOBAL_CFG 0x06
|
|
#define REG_SMPS_OFFSET 0xE0
|
|
#define SMARTREFLEX_ENABLE BIT(3)
|
|
|
|
static unsigned long twl4030_vsel_to_uv(const u8 vsel)
|
|
{
|
|
return (((vsel * 125) + 6000)) * 100;
|
|
}
|
|
|
|
static u8 twl4030_uv_to_vsel(unsigned long uv)
|
|
{
|
|
return DIV_ROUND_UP(uv - 600000, 12500);
|
|
}
|
|
|
|
static unsigned long twl6030_vsel_to_uv(const u8 vsel)
|
|
{
|
|
/*
|
|
* In TWL6030 depending on the value of SMPS_OFFSET
|
|
* efuse register the voltage range supported in
|
|
* standard mode can be either between 0.6V - 1.3V or
|
|
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
|
|
* is programmed to all 0's where as starting from
|
|
* TWL6030 ES1.1 the efuse is programmed to 1
|
|
*/
|
|
if (!is_offset_valid) {
|
|
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
|
|
REG_SMPS_OFFSET);
|
|
is_offset_valid = true;
|
|
}
|
|
|
|
/*
|
|
* There is no specific formula for voltage to vsel
|
|
* conversion above 1.3V. There are special hardcoded
|
|
* values for voltages above 1.3V. Currently we are
|
|
* hardcoding only for 1.35 V which is used for 1GH OPP for
|
|
* OMAP4430.
|
|
*/
|
|
if (vsel == 0x3A)
|
|
return 1350000;
|
|
|
|
if (smps_offset & 0x8)
|
|
return ((((vsel - 1) * 125) + 7000)) * 100;
|
|
else
|
|
return ((((vsel - 1) * 125) + 6000)) * 100;
|
|
}
|
|
|
|
static u8 twl6030_uv_to_vsel(unsigned long uv)
|
|
{
|
|
/*
|
|
* In TWL6030 depending on the value of SMPS_OFFSET
|
|
* efuse register the voltage range supported in
|
|
* standard mode can be either between 0.6V - 1.3V or
|
|
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
|
|
* is programmed to all 0's where as starting from
|
|
* TWL6030 ES1.1 the efuse is programmed to 1
|
|
*/
|
|
if (!is_offset_valid) {
|
|
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
|
|
REG_SMPS_OFFSET);
|
|
is_offset_valid = true;
|
|
}
|
|
|
|
/*
|
|
* There is no specific formula for voltage to vsel
|
|
* conversion above 1.3V. There are special hardcoded
|
|
* values for voltages above 1.3V. Currently we are
|
|
* hardcoding only for 1.35 V which is used for 1GH OPP for
|
|
* OMAP4430.
|
|
*/
|
|
if (uv == 1350000)
|
|
return 0x3A;
|
|
|
|
if (smps_offset & 0x8)
|
|
return DIV_ROUND_UP(uv - 700000, 12500) + 1;
|
|
else
|
|
return DIV_ROUND_UP(uv - 600000, 12500) + 1;
|
|
}
|
|
|
|
static struct omap_volt_pmic_info omap3_mpu_volt_info = {
|
|
.slew_rate = 4000,
|
|
.step_size = 12500,
|
|
.on_volt = 1200000,
|
|
.onlp_volt = 1000000,
|
|
.ret_volt = 975000,
|
|
.off_volt = 600000,
|
|
.volt_setup_time = 0xfff,
|
|
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
|
|
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
|
|
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
|
|
.vp_vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN,
|
|
.vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
|
|
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
|
|
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
|
|
.pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG,
|
|
.vsel_to_uv = twl4030_vsel_to_uv,
|
|
.uv_to_vsel = twl4030_uv_to_vsel,
|
|
};
|
|
|
|
static struct omap_volt_pmic_info omap3_core_volt_info = {
|
|
.slew_rate = 4000,
|
|
.step_size = 12500,
|
|
.on_volt = 1200000,
|
|
.onlp_volt = 1000000,
|
|
.ret_volt = 975000,
|
|
.off_volt = 600000,
|
|
.volt_setup_time = 0xfff,
|
|
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
|
|
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
|
|
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
|
|
.vp_vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN,
|
|
.vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
|
|
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
|
|
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
|
|
.pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG,
|
|
.vsel_to_uv = twl4030_vsel_to_uv,
|
|
.uv_to_vsel = twl4030_uv_to_vsel,
|
|
};
|
|
|
|
static struct omap_volt_pmic_info omap4_mpu_volt_info = {
|
|
.slew_rate = 4000,
|
|
.step_size = 12500,
|
|
.on_volt = 1350000,
|
|
.onlp_volt = 1350000,
|
|
.ret_volt = 837500,
|
|
.off_volt = 600000,
|
|
.volt_setup_time = 0,
|
|
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
|
|
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
|
|
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
|
|
.vp_vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN,
|
|
.vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
|
|
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
|
|
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
|
|
.pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG,
|
|
.vsel_to_uv = twl6030_vsel_to_uv,
|
|
.uv_to_vsel = twl6030_uv_to_vsel,
|
|
};
|
|
|
|
static struct omap_volt_pmic_info omap4_iva_volt_info = {
|
|
.slew_rate = 4000,
|
|
.step_size = 12500,
|
|
.on_volt = 1100000,
|
|
.onlp_volt = 1100000,
|
|
.ret_volt = 837500,
|
|
.off_volt = 600000,
|
|
.volt_setup_time = 0,
|
|
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
|
|
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
|
|
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
|
|
.vp_vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN,
|
|
.vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
|
|
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
|
|
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
|
|
.pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG,
|
|
.vsel_to_uv = twl6030_vsel_to_uv,
|
|
.uv_to_vsel = twl6030_uv_to_vsel,
|
|
};
|
|
|
|
static struct omap_volt_pmic_info omap4_core_volt_info = {
|
|
.slew_rate = 4000,
|
|
.step_size = 12500,
|
|
.on_volt = 1100000,
|
|
.onlp_volt = 1100000,
|
|
.ret_volt = 837500,
|
|
.off_volt = 600000,
|
|
.volt_setup_time = 0,
|
|
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
|
|
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
|
|
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
|
|
.vp_vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN,
|
|
.vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
|
|
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
|
|
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
|
|
.pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG,
|
|
.vsel_to_uv = twl6030_vsel_to_uv,
|
|
.uv_to_vsel = twl6030_uv_to_vsel,
|
|
};
|
|
|
|
int __init omap4_twl_init(void)
|
|
{
|
|
struct voltagedomain *voltdm;
|
|
|
|
if (!cpu_is_omap44xx())
|
|
return -ENODEV;
|
|
|
|
voltdm = voltdm_lookup("mpu");
|
|
omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
|
|
|
|
voltdm = voltdm_lookup("iva");
|
|
omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
|
|
|
|
voltdm = voltdm_lookup("core");
|
|
omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __init omap3_twl_init(void)
|
|
{
|
|
struct voltagedomain *voltdm;
|
|
|
|
if (!cpu_is_omap34xx())
|
|
return -ENODEV;
|
|
|
|
if (cpu_is_omap3630()) {
|
|
omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
|
|
omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
|
|
omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
|
|
omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
|
|
}
|
|
|
|
/*
|
|
* The smartreflex bit on twl4030 specifies if the setting of voltage
|
|
* is done over the I2C_SR path. Since this setting is independent of
|
|
* the actual usage of smartreflex AVS module, we enable TWL SR bit
|
|
* by default irrespective of whether smartreflex AVS module is enabled
|
|
* on the OMAP side or not. This is because without this bit enabled,
|
|
* the voltage scaling through vp forceupdate/bypass mechanism of
|
|
* voltage scaling will not function on TWL over I2C_SR.
|
|
*/
|
|
if (!twl_sr_enable_autoinit)
|
|
omap3_twl_set_sr_bit(true);
|
|
|
|
voltdm = voltdm_lookup("mpu_iva");
|
|
omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
|
|
|
|
voltdm = voltdm_lookup("core");
|
|
omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL
|
|
* @enable: enable SR mode in twl or not
|
|
*
|
|
* If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure
|
|
* voltage scaling through OMAP SR works. Else, the smartreflex bit
|
|
* on twl4030 is cleared as there are platforms which use OMAP3 and T2 but
|
|
* use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct
|
|
* Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
|
|
* in those scenarios this bit is to be cleared (enable = false).
|
|
*
|
|
* Returns 0 on success, error is returned if I2C read/write fails.
|
|
*/
|
|
int __init omap3_twl_set_sr_bit(bool enable)
|
|
{
|
|
u8 temp;
|
|
int ret;
|
|
if (twl_sr_enable_autoinit)
|
|
pr_warning("%s: unexpected multiple calls\n", __func__);
|
|
|
|
ret = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &temp,
|
|
TWL4030_DCDC_GLOBAL_CFG);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (enable)
|
|
temp |= SMARTREFLEX_ENABLE;
|
|
else
|
|
temp &= ~SMARTREFLEX_ENABLE;
|
|
|
|
ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, temp,
|
|
TWL4030_DCDC_GLOBAL_CFG);
|
|
if (!ret) {
|
|
twl_sr_enable_autoinit = true;
|
|
return 0;
|
|
}
|
|
err:
|
|
pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|