linux/drivers/usb
Thomas Pugliese 275e517c30 usb: wusbcore: fix device disconnect on rekey timeout
If three or more wireless devices are connected and two of them
disconnect between 1-3 seconds apart, it can cause the HWA to disconnect
the remaining devices due to failing to see a DN_Alive message from
them.  This happens because when the HWA detects that the first device
is gone, it will attempt to rekey the remaining devices.  If one of the
devices is not responding because it has also been disconnected but not
yet timed out, the synchronous rekey operation running on the wusbd
workqueue can block for up to 5 seconds.  This will prevent the
KEEPALIVE timer from running and DN_Alive messages from being processed
because they are processed by the same workqueue.  This patch moves the
rekey operation to a separate workqueue since it is the only wusb work
item that needs to communicate directly with wireless devices.  The rest
of the WUSB work items either perform no device IO or communicate
directly with the host controller and should not be blocked out by a
non-responding wireless device.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 22:06:59 -07:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: chipidea: enhance kernel-doc format 2014-09-23 21:32:31 -07:00
class usb: class: usbtmc.c: Cleaning up uninitialized variables 2014-07-09 15:59:10 -07:00
common usb: common: add API to get if the platform supports TPL 2014-09-23 21:28:41 -07:00
core usb: core: Kconfig: TPL should apply for both OTG and EH 2014-09-23 21:28:41 -07:00
dwc2 usb: dwc2: handle DMA buffer unmapping sanely 2014-09-19 16:17:58 -07:00
dwc3 Linux 3.17-rc5 2014-09-16 09:53:59 -05:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget Revert "usb: gadget: composite: dequeue cdev->req before free it in composite_dev_cleanup" 2014-09-23 07:56:21 -07:00
host usb: hwa: add USB build dependency for USB_HWA_HCD 2014-09-23 22:06:33 -07:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc usb: misc: yurex: remove useless casting of private_data 2014-09-23 21:50:57 -07:00
mon
musb usb: musb: dsps: kill OTG timer on suspend 2014-09-16 10:01:44 -05:00
phy Linux 3.17-rc5 2014-09-16 09:53:59 -05:00
renesas_usbhs usb: renesas_usbhs: fix driver dependencies 2014-09-23 21:57:22 -07:00
serial USB: serial: remove zte_ev driver 2014-09-15 18:43:08 +02:00
storage uas: Add response iu handling 2014-09-23 21:42:12 -07:00
usbip usbip: remove struct usb_device_id table 2014-08-25 10:40:58 -07:00
wusbcore usb: wusbcore: fix device disconnect on rekey timeout 2014-09-23 22:06:59 -07:00
Kconfig usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
Makefile usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
README
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.