forked from Minki/linux
26074962e8
The problem is that the sdio_bus must be registered before any SDIO drivers are registered against it otherwise the kernel sulks. Because the sdio_bus registration happens through module_init (equivalent to device_initcall), then any SDIO drivers linked before the SDIO core code in the kernel will be initialized first. Upcoming SDIO function drivers are likely to be located outside the drivers/mmc directory as it is common practice to group drivers according to their function rather than the bus they use. SDIO drivers are therefore likely to appear at random location in the kernel link. To make sure the sdio_bus is always initialized before any SDIO drivers, let's move the MMC init to the subsys_initcall level. Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
778 lines
16 KiB
C
778 lines
16 KiB
C
/*
|
|
* linux/drivers/mmc/core/core.c
|
|
*
|
|
* Copyright (C) 2003-2004 Russell King, All Rights Reserved.
|
|
* SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
|
|
* Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
|
|
* MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pagemap.h>
|
|
#include <linux/err.h>
|
|
#include <asm/scatterlist.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sd.h>
|
|
|
|
#include "core.h"
|
|
#include "bus.h"
|
|
#include "host.h"
|
|
#include "sdio_bus.h"
|
|
|
|
#include "mmc_ops.h"
|
|
#include "sd_ops.h"
|
|
#include "sdio_ops.h"
|
|
|
|
extern int mmc_attach_mmc(struct mmc_host *host, u32 ocr);
|
|
extern int mmc_attach_sd(struct mmc_host *host, u32 ocr);
|
|
extern int mmc_attach_sdio(struct mmc_host *host, u32 ocr);
|
|
|
|
static struct workqueue_struct *workqueue;
|
|
|
|
/*
|
|
* Internal function. Schedule delayed work in the MMC work queue.
|
|
*/
|
|
static int mmc_schedule_delayed_work(struct delayed_work *work,
|
|
unsigned long delay)
|
|
{
|
|
return queue_delayed_work(workqueue, work, delay);
|
|
}
|
|
|
|
/*
|
|
* Internal function. Flush all scheduled work from the MMC work queue.
|
|
*/
|
|
static void mmc_flush_scheduled_work(void)
|
|
{
|
|
flush_workqueue(workqueue);
|
|
}
|
|
|
|
/**
|
|
* mmc_request_done - finish processing an MMC request
|
|
* @host: MMC host which completed request
|
|
* @mrq: MMC request which request
|
|
*
|
|
* MMC drivers should call this function when they have completed
|
|
* their processing of a request.
|
|
*/
|
|
void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
|
|
{
|
|
struct mmc_command *cmd = mrq->cmd;
|
|
int err = cmd->error;
|
|
|
|
if (err && cmd->retries) {
|
|
pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
|
|
mmc_hostname(host), cmd->opcode, err);
|
|
|
|
cmd->retries--;
|
|
cmd->error = 0;
|
|
host->ops->request(host, mrq);
|
|
} else {
|
|
pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
|
|
mmc_hostname(host), cmd->opcode, err,
|
|
cmd->resp[0], cmd->resp[1],
|
|
cmd->resp[2], cmd->resp[3]);
|
|
|
|
if (mrq->data) {
|
|
pr_debug("%s: %d bytes transferred: %d\n",
|
|
mmc_hostname(host),
|
|
mrq->data->bytes_xfered, mrq->data->error);
|
|
}
|
|
|
|
if (mrq->stop) {
|
|
pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
|
|
mmc_hostname(host), mrq->stop->opcode,
|
|
mrq->stop->error,
|
|
mrq->stop->resp[0], mrq->stop->resp[1],
|
|
mrq->stop->resp[2], mrq->stop->resp[3]);
|
|
}
|
|
|
|
if (mrq->done)
|
|
mrq->done(mrq);
|
|
}
|
|
}
|
|
|
|
EXPORT_SYMBOL(mmc_request_done);
|
|
|
|
static void
|
|
mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
|
|
{
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
unsigned int i, sz;
|
|
#endif
|
|
|
|
pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
|
|
mmc_hostname(host), mrq->cmd->opcode,
|
|
mrq->cmd->arg, mrq->cmd->flags);
|
|
|
|
if (mrq->data) {
|
|
pr_debug("%s: blksz %d blocks %d flags %08x "
|
|
"tsac %d ms nsac %d\n",
|
|
mmc_hostname(host), mrq->data->blksz,
|
|
mrq->data->blocks, mrq->data->flags,
|
|
mrq->data->timeout_ns / 10000000,
|
|
mrq->data->timeout_clks);
|
|
}
|
|
|
|
if (mrq->stop) {
|
|
pr_debug("%s: CMD%u arg %08x flags %08x\n",
|
|
mmc_hostname(host), mrq->stop->opcode,
|
|
mrq->stop->arg, mrq->stop->flags);
|
|
}
|
|
|
|
WARN_ON(!host->claimed);
|
|
|
|
mrq->cmd->error = 0;
|
|
mrq->cmd->mrq = mrq;
|
|
if (mrq->data) {
|
|
BUG_ON(mrq->data->blksz > host->max_blk_size);
|
|
BUG_ON(mrq->data->blocks > host->max_blk_count);
|
|
BUG_ON(mrq->data->blocks * mrq->data->blksz >
|
|
host->max_req_size);
|
|
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
sz = 0;
|
|
for (i = 0;i < mrq->data->sg_len;i++)
|
|
sz += mrq->data->sg[i].length;
|
|
BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
|
|
#endif
|
|
|
|
mrq->cmd->data = mrq->data;
|
|
mrq->data->error = 0;
|
|
mrq->data->mrq = mrq;
|
|
if (mrq->stop) {
|
|
mrq->data->stop = mrq->stop;
|
|
mrq->stop->error = 0;
|
|
mrq->stop->mrq = mrq;
|
|
}
|
|
}
|
|
host->ops->request(host, mrq);
|
|
}
|
|
|
|
static void mmc_wait_done(struct mmc_request *mrq)
|
|
{
|
|
complete(mrq->done_data);
|
|
}
|
|
|
|
/**
|
|
* mmc_wait_for_req - start a request and wait for completion
|
|
* @host: MMC host to start command
|
|
* @mrq: MMC request to start
|
|
*
|
|
* Start a new MMC custom command request for a host, and wait
|
|
* for the command to complete. Does not attempt to parse the
|
|
* response.
|
|
*/
|
|
void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
|
|
{
|
|
DECLARE_COMPLETION_ONSTACK(complete);
|
|
|
|
mrq->done_data = &complete;
|
|
mrq->done = mmc_wait_done;
|
|
|
|
mmc_start_request(host, mrq);
|
|
|
|
wait_for_completion(&complete);
|
|
}
|
|
|
|
EXPORT_SYMBOL(mmc_wait_for_req);
|
|
|
|
/**
|
|
* mmc_wait_for_cmd - start a command and wait for completion
|
|
* @host: MMC host to start command
|
|
* @cmd: MMC command to start
|
|
* @retries: maximum number of retries
|
|
*
|
|
* Start a new MMC command for a host, and wait for the command
|
|
* to complete. Return any error that occurred while the command
|
|
* was executing. Do not attempt to parse the response.
|
|
*/
|
|
int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries)
|
|
{
|
|
struct mmc_request mrq;
|
|
|
|
BUG_ON(!host->claimed);
|
|
|
|
memset(&mrq, 0, sizeof(struct mmc_request));
|
|
|
|
memset(cmd->resp, 0, sizeof(cmd->resp));
|
|
cmd->retries = retries;
|
|
|
|
mrq.cmd = cmd;
|
|
cmd->data = NULL;
|
|
|
|
mmc_wait_for_req(host, &mrq);
|
|
|
|
return cmd->error;
|
|
}
|
|
|
|
EXPORT_SYMBOL(mmc_wait_for_cmd);
|
|
|
|
/**
|
|
* mmc_set_data_timeout - set the timeout for a data command
|
|
* @data: data phase for command
|
|
* @card: the MMC card associated with the data transfer
|
|
*
|
|
* Computes the data timeout parameters according to the
|
|
* correct algorithm given the card type.
|
|
*/
|
|
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
|
|
{
|
|
unsigned int mult;
|
|
|
|
/*
|
|
* SD cards use a 100 multiplier rather than 10
|
|
*/
|
|
mult = mmc_card_sd(card) ? 100 : 10;
|
|
|
|
/*
|
|
* Scale up the multiplier (and therefore the timeout) by
|
|
* the r2w factor for writes.
|
|
*/
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
mult <<= card->csd.r2w_factor;
|
|
|
|
data->timeout_ns = card->csd.tacc_ns * mult;
|
|
data->timeout_clks = card->csd.tacc_clks * mult;
|
|
|
|
/*
|
|
* SD cards also have an upper limit on the timeout.
|
|
*/
|
|
if (mmc_card_sd(card)) {
|
|
unsigned int timeout_us, limit_us;
|
|
|
|
timeout_us = data->timeout_ns / 1000;
|
|
timeout_us += data->timeout_clks * 1000 /
|
|
(card->host->ios.clock / 1000);
|
|
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
limit_us = 250000;
|
|
else
|
|
limit_us = 100000;
|
|
|
|
/*
|
|
* SDHC cards always use these fixed values.
|
|
*/
|
|
if (timeout_us > limit_us || mmc_card_blockaddr(card)) {
|
|
data->timeout_ns = limit_us * 1000;
|
|
data->timeout_clks = 0;
|
|
}
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(mmc_set_data_timeout);
|
|
|
|
/**
|
|
* mmc_claim_host - exclusively claim a host
|
|
* @host: mmc host to claim
|
|
*
|
|
* Claim a host for a set of operations.
|
|
*/
|
|
void mmc_claim_host(struct mmc_host *host)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
unsigned long flags;
|
|
|
|
might_sleep();
|
|
|
|
add_wait_queue(&host->wq, &wait);
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
while (1) {
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
if (!host->claimed)
|
|
break;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
schedule();
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
}
|
|
set_current_state(TASK_RUNNING);
|
|
host->claimed = 1;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
remove_wait_queue(&host->wq, &wait);
|
|
}
|
|
|
|
EXPORT_SYMBOL(mmc_claim_host);
|
|
|
|
/**
|
|
* mmc_release_host - release a host
|
|
* @host: mmc host to release
|
|
*
|
|
* Release a MMC host, allowing others to claim the host
|
|
* for their operations.
|
|
*/
|
|
void mmc_release_host(struct mmc_host *host)
|
|
{
|
|
unsigned long flags;
|
|
|
|
BUG_ON(!host->claimed);
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
host->claimed = 0;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
wake_up(&host->wq);
|
|
}
|
|
|
|
EXPORT_SYMBOL(mmc_release_host);
|
|
|
|
/*
|
|
* Internal function that does the actual ios call to the host driver,
|
|
* optionally printing some debug output.
|
|
*/
|
|
static inline void mmc_set_ios(struct mmc_host *host)
|
|
{
|
|
struct mmc_ios *ios = &host->ios;
|
|
|
|
pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
|
|
"width %u timing %u\n",
|
|
mmc_hostname(host), ios->clock, ios->bus_mode,
|
|
ios->power_mode, ios->chip_select, ios->vdd,
|
|
ios->bus_width, ios->timing);
|
|
|
|
host->ops->set_ios(host, ios);
|
|
}
|
|
|
|
/*
|
|
* Control chip select pin on a host.
|
|
*/
|
|
void mmc_set_chip_select(struct mmc_host *host, int mode)
|
|
{
|
|
host->ios.chip_select = mode;
|
|
mmc_set_ios(host);
|
|
}
|
|
|
|
/*
|
|
* Sets the host clock to the highest possible frequency that
|
|
* is below "hz".
|
|
*/
|
|
void mmc_set_clock(struct mmc_host *host, unsigned int hz)
|
|
{
|
|
WARN_ON(hz < host->f_min);
|
|
|
|
if (hz > host->f_max)
|
|
hz = host->f_max;
|
|
|
|
host->ios.clock = hz;
|
|
mmc_set_ios(host);
|
|
}
|
|
|
|
/*
|
|
* Change the bus mode (open drain/push-pull) of a host.
|
|
*/
|
|
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
|
|
{
|
|
host->ios.bus_mode = mode;
|
|
mmc_set_ios(host);
|
|
}
|
|
|
|
/*
|
|
* Change data bus width of a host.
|
|
*/
|
|
void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
|
|
{
|
|
host->ios.bus_width = width;
|
|
mmc_set_ios(host);
|
|
}
|
|
|
|
/*
|
|
* Mask off any voltages we don't support and select
|
|
* the lowest voltage
|
|
*/
|
|
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
|
|
{
|
|
int bit;
|
|
|
|
ocr &= host->ocr_avail;
|
|
|
|
bit = ffs(ocr);
|
|
if (bit) {
|
|
bit -= 1;
|
|
|
|
ocr &= 3 << bit;
|
|
|
|
host->ios.vdd = bit;
|
|
mmc_set_ios(host);
|
|
} else {
|
|
ocr = 0;
|
|
}
|
|
|
|
return ocr;
|
|
}
|
|
|
|
/*
|
|
* Select timing parameters for host.
|
|
*/
|
|
void mmc_set_timing(struct mmc_host *host, unsigned int timing)
|
|
{
|
|
host->ios.timing = timing;
|
|
mmc_set_ios(host);
|
|
}
|
|
|
|
/*
|
|
* Apply power to the MMC stack. This is a two-stage process.
|
|
* First, we enable power to the card without the clock running.
|
|
* We then wait a bit for the power to stabilise. Finally,
|
|
* enable the bus drivers and clock to the card.
|
|
*
|
|
* We must _NOT_ enable the clock prior to power stablising.
|
|
*
|
|
* If a host does all the power sequencing itself, ignore the
|
|
* initial MMC_POWER_UP stage.
|
|
*/
|
|
static void mmc_power_up(struct mmc_host *host)
|
|
{
|
|
int bit = fls(host->ocr_avail) - 1;
|
|
|
|
host->ios.vdd = bit;
|
|
host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
|
|
host->ios.chip_select = MMC_CS_DONTCARE;
|
|
host->ios.power_mode = MMC_POWER_UP;
|
|
host->ios.bus_width = MMC_BUS_WIDTH_1;
|
|
host->ios.timing = MMC_TIMING_LEGACY;
|
|
mmc_set_ios(host);
|
|
|
|
mmc_delay(1);
|
|
|
|
host->ios.clock = host->f_min;
|
|
host->ios.power_mode = MMC_POWER_ON;
|
|
mmc_set_ios(host);
|
|
|
|
mmc_delay(2);
|
|
}
|
|
|
|
static void mmc_power_off(struct mmc_host *host)
|
|
{
|
|
host->ios.clock = 0;
|
|
host->ios.vdd = 0;
|
|
host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
|
|
host->ios.chip_select = MMC_CS_DONTCARE;
|
|
host->ios.power_mode = MMC_POWER_OFF;
|
|
host->ios.bus_width = MMC_BUS_WIDTH_1;
|
|
host->ios.timing = MMC_TIMING_LEGACY;
|
|
mmc_set_ios(host);
|
|
}
|
|
|
|
/*
|
|
* Cleanup when the last reference to the bus operator is dropped.
|
|
*/
|
|
void __mmc_release_bus(struct mmc_host *host)
|
|
{
|
|
BUG_ON(!host);
|
|
BUG_ON(host->bus_refs);
|
|
BUG_ON(!host->bus_dead);
|
|
|
|
host->bus_ops = NULL;
|
|
}
|
|
|
|
/*
|
|
* Increase reference count of bus operator
|
|
*/
|
|
static inline void mmc_bus_get(struct mmc_host *host)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
host->bus_refs++;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Decrease reference count of bus operator and free it if
|
|
* it is the last reference.
|
|
*/
|
|
static inline void mmc_bus_put(struct mmc_host *host)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
host->bus_refs--;
|
|
if ((host->bus_refs == 0) && host->bus_ops)
|
|
__mmc_release_bus(host);
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Assign a mmc bus handler to a host. Only one bus handler may control a
|
|
* host at any given time.
|
|
*/
|
|
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops)
|
|
{
|
|
unsigned long flags;
|
|
|
|
BUG_ON(!host);
|
|
BUG_ON(!ops);
|
|
|
|
BUG_ON(!host->claimed);
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
BUG_ON(host->bus_ops);
|
|
BUG_ON(host->bus_refs);
|
|
|
|
host->bus_ops = ops;
|
|
host->bus_refs = 1;
|
|
host->bus_dead = 0;
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Remove the current bus handler from a host. Assumes that there are
|
|
* no interesting cards left, so the bus is powered down.
|
|
*/
|
|
void mmc_detach_bus(struct mmc_host *host)
|
|
{
|
|
unsigned long flags;
|
|
|
|
BUG_ON(!host);
|
|
|
|
BUG_ON(!host->claimed);
|
|
BUG_ON(!host->bus_ops);
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
host->bus_dead = 1;
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
mmc_power_off(host);
|
|
|
|
mmc_bus_put(host);
|
|
}
|
|
|
|
/**
|
|
* mmc_detect_change - process change of state on a MMC socket
|
|
* @host: host which changed state.
|
|
* @delay: optional delay to wait before detection (jiffies)
|
|
*
|
|
* MMC drivers should call this when they detect a card has been
|
|
* inserted or removed. The MMC layer will confirm that any
|
|
* present card is still functional, and initialize any newly
|
|
* inserted.
|
|
*/
|
|
void mmc_detect_change(struct mmc_host *host, unsigned long delay)
|
|
{
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
BUG_ON(host->removed);
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
#endif
|
|
|
|
mmc_schedule_delayed_work(&host->detect, delay);
|
|
}
|
|
|
|
EXPORT_SYMBOL(mmc_detect_change);
|
|
|
|
|
|
void mmc_rescan(struct work_struct *work)
|
|
{
|
|
struct mmc_host *host =
|
|
container_of(work, struct mmc_host, detect.work);
|
|
u32 ocr;
|
|
int err;
|
|
|
|
mmc_bus_get(host);
|
|
|
|
if (host->bus_ops == NULL) {
|
|
/*
|
|
* Only we can add a new handler, so it's safe to
|
|
* release the lock here.
|
|
*/
|
|
mmc_bus_put(host);
|
|
|
|
mmc_claim_host(host);
|
|
|
|
mmc_power_up(host);
|
|
mmc_go_idle(host);
|
|
|
|
mmc_send_if_cond(host, host->ocr_avail);
|
|
|
|
/*
|
|
* First we search for SDIO...
|
|
*/
|
|
err = mmc_send_io_op_cond(host, 0, &ocr);
|
|
if (!err) {
|
|
if (mmc_attach_sdio(host, ocr))
|
|
mmc_power_off(host);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* ...then normal SD...
|
|
*/
|
|
err = mmc_send_app_op_cond(host, 0, &ocr);
|
|
if (!err) {
|
|
if (mmc_attach_sd(host, ocr))
|
|
mmc_power_off(host);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* ...and finally MMC.
|
|
*/
|
|
err = mmc_send_op_cond(host, 0, &ocr);
|
|
if (!err) {
|
|
if (mmc_attach_mmc(host, ocr))
|
|
mmc_power_off(host);
|
|
return;
|
|
}
|
|
|
|
mmc_release_host(host);
|
|
mmc_power_off(host);
|
|
} else {
|
|
if (host->bus_ops->detect && !host->bus_dead)
|
|
host->bus_ops->detect(host);
|
|
|
|
mmc_bus_put(host);
|
|
}
|
|
}
|
|
|
|
void mmc_start_host(struct mmc_host *host)
|
|
{
|
|
mmc_power_off(host);
|
|
mmc_detect_change(host, 0);
|
|
}
|
|
|
|
void mmc_stop_host(struct mmc_host *host)
|
|
{
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
host->removed = 1;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
#endif
|
|
|
|
mmc_flush_scheduled_work();
|
|
|
|
mmc_bus_get(host);
|
|
if (host->bus_ops && !host->bus_dead) {
|
|
if (host->bus_ops->remove)
|
|
host->bus_ops->remove(host);
|
|
|
|
mmc_claim_host(host);
|
|
mmc_detach_bus(host);
|
|
mmc_release_host(host);
|
|
}
|
|
mmc_bus_put(host);
|
|
|
|
BUG_ON(host->card);
|
|
|
|
mmc_power_off(host);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/**
|
|
* mmc_suspend_host - suspend a host
|
|
* @host: mmc host
|
|
* @state: suspend mode (PM_SUSPEND_xxx)
|
|
*/
|
|
int mmc_suspend_host(struct mmc_host *host, pm_message_t state)
|
|
{
|
|
mmc_flush_scheduled_work();
|
|
|
|
mmc_bus_get(host);
|
|
if (host->bus_ops && !host->bus_dead) {
|
|
if (host->bus_ops->suspend)
|
|
host->bus_ops->suspend(host);
|
|
if (!host->bus_ops->resume) {
|
|
if (host->bus_ops->remove)
|
|
host->bus_ops->remove(host);
|
|
|
|
mmc_claim_host(host);
|
|
mmc_detach_bus(host);
|
|
mmc_release_host(host);
|
|
}
|
|
}
|
|
mmc_bus_put(host);
|
|
|
|
mmc_power_off(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(mmc_suspend_host);
|
|
|
|
/**
|
|
* mmc_resume_host - resume a previously suspended host
|
|
* @host: mmc host
|
|
*/
|
|
int mmc_resume_host(struct mmc_host *host)
|
|
{
|
|
mmc_bus_get(host);
|
|
if (host->bus_ops && !host->bus_dead) {
|
|
mmc_power_up(host);
|
|
BUG_ON(!host->bus_ops->resume);
|
|
host->bus_ops->resume(host);
|
|
}
|
|
mmc_bus_put(host);
|
|
|
|
/*
|
|
* We add a slight delay here so that resume can progress
|
|
* in parallel.
|
|
*/
|
|
mmc_detect_change(host, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(mmc_resume_host);
|
|
|
|
#endif
|
|
|
|
static int __init mmc_init(void)
|
|
{
|
|
int ret;
|
|
|
|
workqueue = create_singlethread_workqueue("kmmcd");
|
|
if (!workqueue)
|
|
return -ENOMEM;
|
|
|
|
ret = mmc_register_bus();
|
|
if (ret)
|
|
goto destroy_workqueue;
|
|
|
|
ret = mmc_register_host_class();
|
|
if (ret)
|
|
goto unregister_bus;
|
|
|
|
ret = sdio_register_bus();
|
|
if (ret)
|
|
goto unregister_host_class;
|
|
|
|
return 0;
|
|
|
|
unregister_host_class:
|
|
mmc_unregister_host_class();
|
|
unregister_bus:
|
|
mmc_unregister_bus();
|
|
destroy_workqueue:
|
|
destroy_workqueue(workqueue);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit mmc_exit(void)
|
|
{
|
|
sdio_unregister_bus();
|
|
mmc_unregister_host_class();
|
|
mmc_unregister_bus();
|
|
destroy_workqueue(workqueue);
|
|
}
|
|
|
|
subsys_initcall(mmc_init);
|
|
module_exit(mmc_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|