forked from Minki/linux
faa38b5e0e
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits) ALSA: hda - Add pin-fix for HP dc5750 ALSA: als4000: Fix potentially invalid DMA mode setup ALSA: als4000: enable burst mode ALSA: hda - Fix initial capsrc selection in patch_alc269() ASoC: TWL4030: Capture route runtime DAPM ordering fix ALSA: hda - Add PC-beep whitelist for an Intel board ALSA: hda - More relax for pending period handling ALSA: hda - Define AC_FMT_* constants ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs ALSA: hda - Add support for HDMI HBR passthrough ALSA: hda - Set Stream Type in Stream Format according to AES0 ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF ASoC: wm9081: fix resource reclaim in wm9081_register error path ASoC: wm8978: fix a memory leak if a wm8978_register fail ASoC: wm8974: fix a memory leak if another WM8974 is registered ASoC: wm8961: fix resource reclaim in wm8961_register error path ASoC: wm8955: fix resource reclaim in wm8955_register error path ASoC: wm8940: fix a memory leak if wm8940_register return error ASoC: wm8904: fix resource reclaim in wm8904_register error path ...
153 lines
3.7 KiB
C
153 lines
3.7 KiB
C
/*
|
|
* arch/arm/mach-kirkwood/openrd-setup.c
|
|
*
|
|
* Marvell OpenRD (Base|Client|Ultimate) Board Setup
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/i2c.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <mach/kirkwood.h>
|
|
#include <plat/mvsdio.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
|
|
static struct mtd_partition openrd_nand_parts[] = {
|
|
{
|
|
.name = "u-boot",
|
|
.offset = 0,
|
|
.size = SZ_1M,
|
|
.mask_flags = MTD_WRITEABLE
|
|
}, {
|
|
.name = "uImage",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = SZ_4M
|
|
}, {
|
|
.name = "root",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = MTDPART_SIZ_FULL
|
|
},
|
|
};
|
|
|
|
static struct mv643xx_eth_platform_data openrd_ge00_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
|
};
|
|
|
|
static struct mv643xx_eth_platform_data openrd_ge01_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(24),
|
|
};
|
|
|
|
static struct mv_sata_platform_data openrd_sata_data = {
|
|
.n_ports = 2,
|
|
};
|
|
|
|
static struct mvsdio_platform_data openrd_mvsdio_data = {
|
|
.gpio_card_detect = 29, /* MPP29 used as SD card detect */
|
|
};
|
|
|
|
static unsigned int openrd_mpp_config[] __initdata = {
|
|
MPP29_GPIO,
|
|
0
|
|
};
|
|
|
|
static struct i2c_board_info i2c_board_info[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("cs42l51", 0x4a),
|
|
},
|
|
};
|
|
|
|
static void __init openrd_init(void)
|
|
{
|
|
/*
|
|
* Basic setup. Needs to be called early.
|
|
*/
|
|
kirkwood_init();
|
|
kirkwood_mpp_conf(openrd_mpp_config);
|
|
|
|
kirkwood_uart0_init();
|
|
kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
|
|
|
|
kirkwood_ehci_init();
|
|
|
|
if (machine_is_openrd_ultimate()) {
|
|
openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
|
|
openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
|
|
}
|
|
|
|
kirkwood_ge00_init(&openrd_ge00_data);
|
|
if (!machine_is_openrd_base())
|
|
kirkwood_ge01_init(&openrd_ge01_data);
|
|
|
|
kirkwood_sata_init(&openrd_sata_data);
|
|
kirkwood_sdio_init(&openrd_mvsdio_data);
|
|
|
|
kirkwood_i2c_init();
|
|
|
|
if (machine_is_openrd_client()) {
|
|
i2c_register_board_info(0, i2c_board_info,
|
|
ARRAY_SIZE(i2c_board_info));
|
|
kirkwood_audio_init();
|
|
}
|
|
}
|
|
|
|
static int __init openrd_pci_init(void)
|
|
{
|
|
if (machine_is_openrd_base() ||
|
|
machine_is_openrd_client() ||
|
|
machine_is_openrd_ultimate())
|
|
kirkwood_pcie_init(KW_PCIE0);
|
|
|
|
return 0;
|
|
}
|
|
subsys_initcall(openrd_pci_init);
|
|
|
|
#ifdef CONFIG_MACH_OPENRD_BASE
|
|
MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
|
|
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
|
|
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
|
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
|
.boot_params = 0x00000100,
|
|
.init_machine = openrd_init,
|
|
.map_io = kirkwood_map_io,
|
|
.init_irq = kirkwood_init_irq,
|
|
.timer = &kirkwood_timer,
|
|
MACHINE_END
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACH_OPENRD_CLIENT
|
|
MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
|
|
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
|
|
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
|
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
|
.boot_params = 0x00000100,
|
|
.init_machine = openrd_init,
|
|
.map_io = kirkwood_map_io,
|
|
.init_irq = kirkwood_init_irq,
|
|
.timer = &kirkwood_timer,
|
|
MACHINE_END
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACH_OPENRD_ULTIMATE
|
|
MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
|
|
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
|
|
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
|
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
|
.boot_params = 0x00000100,
|
|
.init_machine = openrd_init,
|
|
.map_io = kirkwood_map_io,
|
|
.init_irq = kirkwood_init_irq,
|
|
.timer = &kirkwood_timer,
|
|
MACHINE_END
|
|
#endif
|