forked from Minki/linux
bf400242a9
Set GCK's parent as audio clock. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Rob Herring <robh@kernel.org>
59 lines
1.6 KiB
Plaintext
59 lines
1.6 KiB
Plaintext
* Atmel ClassD driver under ALSA SoC architecture
|
|
|
|
Required properties:
|
|
- compatible
|
|
Should be "atmel,sama5d2-classd".
|
|
- reg
|
|
Should contain ClassD registers location and length.
|
|
- interrupts
|
|
Should contain the IRQ line for the ClassD.
|
|
- dmas
|
|
One DMA specifiers as described in atmel-dma.txt and dma.txt files.
|
|
- dma-names
|
|
Must be "tx".
|
|
- clock-names
|
|
Tuple listing input clock names.
|
|
Required elements: "pclk", "gclk" and "aclk".
|
|
- clocks
|
|
Please refer to clock-bindings.txt.
|
|
- assigned-clocks
|
|
Should be <&classd_gclk>.
|
|
- assigned-clock-parents
|
|
Should be <&audio_pll_pmc>.
|
|
|
|
Optional properties:
|
|
- pinctrl-names, pinctrl-0
|
|
Please refer to pinctrl-bindings.txt.
|
|
- atmel,model
|
|
The user-visible name of this sound complex.
|
|
The default value is "CLASSD".
|
|
- atmel,pwm-type
|
|
PWM modulation type, "single" or "diff".
|
|
The default value is "single".
|
|
- atmel,non-overlap-time
|
|
Set non-overlapping time, the unit is nanosecond(ns).
|
|
There are four values,
|
|
<5>, <10>, <15>, <20>, the default value is <10>.
|
|
Non-overlapping will be disabled if not specified.
|
|
|
|
Example:
|
|
classd: classd@fc048000 {
|
|
compatible = "atmel,sama5d2-classd";
|
|
reg = <0xfc048000 0x100>;
|
|
interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(47))>;
|
|
dma-names = "tx";
|
|
clocks = <&classd_clk>, <&classd_gclk>, <&audio_pll_pmc>;
|
|
clock-names = "pclk", "gclk", "aclk";
|
|
assigned-clocks = <&classd_gclk>;
|
|
assigned-clock-parents = <&audio_pll_pmc>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_classd_default>;
|
|
atmel,model = "classd @ SAMA5D2-Xplained";
|
|
atmel,pwm-type = "diff";
|
|
atmel,non-overlap-time = <10>;
|
|
};
|