e4bf797ac1
PHY devices may only list compatibility with clause 22, 45, and if they need to be more specific, their PHY identifier values. No other compatible strings are allowed. Make this clear in the documentation, and remove examples where make/model compatible strings are listed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
46 lines
1.6 KiB
Plaintext
46 lines
1.6 KiB
Plaintext
PHY nodes
|
|
|
|
Required properties:
|
|
|
|
- interrupts : <a b> where a is the interrupt number and b is a
|
|
field that represents an encoding of the sense and level
|
|
information for the interrupt. This should be encoded based on
|
|
the information in section 2) depending on the type of interrupt
|
|
controller you have.
|
|
- interrupt-parent : the phandle for the interrupt controller that
|
|
services interrupts for this device.
|
|
- reg : The ID number for the phy, usually a small integer
|
|
|
|
Optional Properties:
|
|
|
|
- compatible: Compatible list, may contain
|
|
"ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
|
|
PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
|
|
specifications. If neither of these are specified, the default is to
|
|
assume clause 22.
|
|
|
|
If the phy's identifier is known then the list may contain an entry
|
|
of the form: "ethernet-phy-idAAAA.BBBB" where
|
|
AAAA - The value of the 16 bit Phy Identifier 1 register as
|
|
4 hex digits. This is the chip vendor OUI bits 3:18
|
|
BBBB - The value of the 16 bit Phy Identifier 2 register as
|
|
4 hex digits. This is the chip vendor OUI bits 19:24,
|
|
followed by 10 bits of a vendor specific ID.
|
|
|
|
The compatible list should not contain other values than those
|
|
listed here.
|
|
|
|
- max-speed: Maximum PHY supported speed (10, 100, 1000...)
|
|
|
|
- broken-turn-around: If set, indicates the PHY device does not correctly
|
|
release the turn around line low at the end of a MDIO transaction.
|
|
|
|
Example:
|
|
|
|
ethernet-phy@0 {
|
|
compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22";
|
|
interrupt-parent = <40000>;
|
|
interrupts = <35 1>;
|
|
reg = <0>;
|
|
};
|