linux/arch/arm/mach-mx5/devices.c
Arnaud Patard (Rtp) 8305ed75d1 MX51: Add support for usb host 2
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 10:20:23 +01:00

204 lines
4.7 KiB
C

/*
* Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/irqs.h>
static struct resource mxc_hsi2c_resources[] = {
{
.start = MX51_HSI2C_DMA_BASE_ADDR,
.end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MX51_MXC_INT_HS_I2C,
.end = MX51_MXC_INT_HS_I2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_hsi2c_device = {
.name = "imx-i2c",
.id = 2,
.num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
.resource = mxc_hsi2c_resources
};
static u64 usb_dma_mask = DMA_BIT_MASK(32);
static struct resource usbotg_resources[] = {
{
.start = MX51_OTG_BASE_ADDR,
.end = MX51_OTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
},
{
.start = MX51_MXC_INT_USB_OTG,
.flags = IORESOURCE_IRQ,
},
};
/* OTG gadget device */
struct platform_device mxc_usbdr_udc_device = {
.name = "fsl-usb2-udc",
.id = -1,
.num_resources = ARRAY_SIZE(usbotg_resources),
.resource = usbotg_resources,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
struct platform_device mxc_usbdr_host_device = {
.name = "mxc-ehci",
.id = 0,
.num_resources = ARRAY_SIZE(usbotg_resources),
.resource = usbotg_resources,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct resource usbh1_resources[] = {
{
.start = MX51_OTG_BASE_ADDR + 0x200,
.end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
.flags = IORESOURCE_MEM,
},
{
.start = MX51_MXC_INT_USB_H1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_usbh1_device = {
.name = "mxc-ehci",
.id = 1,
.num_resources = ARRAY_SIZE(usbh1_resources),
.resource = usbh1_resources,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct resource usbh2_resources[] = {
{
.start = MX51_OTG_BASE_ADDR + 0x400,
.end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff,
.flags = IORESOURCE_MEM,
},
{
.start = MX51_MXC_INT_USB_H2,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_usbh2_device = {
.name = "mxc-ehci",
.id = 2,
.num_resources = ARRAY_SIZE(usbh2_resources),
.resource = usbh2_resources,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct resource mxc_kpp_resources[] = {
{
.start = MX51_MXC_INT_KPP,
.end = MX51_MXC_INT_KPP,
.flags = IORESOURCE_IRQ,
} , {
.start = MX51_KPP_BASE_ADDR,
.end = MX51_KPP_BASE_ADDR + 0x8 - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device mxc_keypad_device = {
.name = "imx-keypad",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_kpp_resources),
.resource = mxc_kpp_resources,
};
static struct mxc_gpio_port mxc_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
.irq = MX51_MXC_INT_GPIO1_LOW,
.irq_high = MX51_MXC_INT_GPIO1_HIGH,
.virtual_irq_start = MXC_GPIO_IRQ_START
},
{
.chip.label = "gpio-1",
.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
.irq = MX51_MXC_INT_GPIO2_LOW,
.irq_high = MX51_MXC_INT_GPIO2_HIGH,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
},
{
.chip.label = "gpio-2",
.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
.irq = MX51_MXC_INT_GPIO3_LOW,
.irq_high = MX51_MXC_INT_GPIO3_HIGH,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
},
{
.chip.label = "gpio-3",
.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
.irq = MX51_MXC_INT_GPIO4_LOW,
.irq_high = MX51_MXC_INT_GPIO4_HIGH,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
},
{
.chip.label = "gpio-4",
.base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
.irq = MX53_INT_GPIO5_LOW,
.irq_high = MX53_INT_GPIO5_HIGH,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4
},
{
.chip.label = "gpio-5",
.base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
.irq = MX53_INT_GPIO6_LOW,
.irq_high = MX53_INT_GPIO6_HIGH,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5
},
{
.chip.label = "gpio-6",
.base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
.irq = MX53_INT_GPIO7_LOW,
.irq_high = MX53_INT_GPIO7_HIGH,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6
},
};
int __init imx51_register_gpios(void)
{
return mxc_gpio_init(mxc_gpio_ports, 4);
}
int __init imx53_register_gpios(void)
{
return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
}