leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2373c1801a
linux/drivers/i2c/busses/i2c-ali1563.c
Jean Delvare 3401b2fff3 i2c: Let bus drivers add SPD to their class 
Let general purpose I2C/SMBus bus drivers add SPD to their class. Once
this is done, we will be able to tell the eeprom driver to only probe
for SPD EEPROMs and similar on these buses.

Note that I took a conservative approach here, adding I2C_CLASS_SPD to
many drivers that have no idea whether they can host SPD EEPROMs or not.
This is to make sure that the eeprom driver doesn't stop probing buses
where SPD EEPROMs or equivalent live.

So, bus driver maintainers and users should feel free to remove the SPD
class from drivers those buses never have SPD EEPROMs or they don't
want the eeprom driver to bind to them. Likewise, feel free to add the
SPD class to any bus driver I might have missed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:29 +02:00

445 lines
11 KiB
C
Raw Blame History

/**
* i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
*
* Copyright (C) 2004 Patrick Mochel
* 2005 Rudolf Marek <r.marek@assembler.cz>
*
* The 1563 southbridge is deceptively similar to the 1533, with a
* few notable exceptions. One of those happens to be the fact they
* upgraded the i2c core to be 2.0 compliant, and happens to be almost
* identical to the i2c controller found in the Intel 801 south
* bridges.
*
* This driver is based on a mix of the 15x3, 1535, and i801 drivers,
* with a little help from the ALi 1563 spec.
*
* This file is released under the GPLv2
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/pci.h>
#include <linux/init.h>
#define ALI1563_MAX_TIMEOUT 500
#define ALI1563_SMBBA 0x80
#define ALI1563_SMB_IOEN 1
#define ALI1563_SMB_HOSTEN 2
#define ALI1563_SMB_IOSIZE 16
#define SMB_HST_STS (ali1563_smba + 0)
#define SMB_HST_CNTL1 (ali1563_smba + 1)
#define SMB_HST_CNTL2 (ali1563_smba + 2)
#define SMB_HST_CMD (ali1563_smba + 3)
#define SMB_HST_ADD (ali1563_smba + 4)
#define SMB_HST_DAT0 (ali1563_smba + 5)
#define SMB_HST_DAT1 (ali1563_smba + 6)
#define SMB_BLK_DAT (ali1563_smba + 7)
#define HST_STS_BUSY 0x01
#define HST_STS_INTR 0x02
#define HST_STS_DEVERR 0x04
#define HST_STS_BUSERR 0x08
#define HST_STS_FAIL 0x10
#define HST_STS_DONE 0x80
#define HST_STS_BAD 0x1c
#define HST_CNTL1_TIMEOUT 0x80
#define HST_CNTL1_LAST 0x40
#define HST_CNTL2_KILL 0x04
#define HST_CNTL2_START 0x40
#define HST_CNTL2_QUICK 0x00
#define HST_CNTL2_BYTE 0x01
#define HST_CNTL2_BYTE_DATA 0x02
#define HST_CNTL2_WORD_DATA 0x03
#define HST_CNTL2_BLOCK 0x05
#define HST_CNTL2_SIZEMASK 0x38
static struct pci_driver ali1563_pci_driver;
static unsigned short ali1563_smba;
static int ali1563_transaction(struct i2c_adapter * a, int size)
{
u32 data;
int timeout;
int status = -EIO;
dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
inb_p(SMB_HST_DAT1));
data = inb_p(SMB_HST_STS);
if (data & HST_STS_BAD) {
dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
outb_p(data | HST_STS_BAD,SMB_HST_STS);
data = inb_p(SMB_HST_STS);
if (data & HST_STS_BAD)
return -EBUSY;
}
outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
timeout = ALI1563_MAX_TIMEOUT;
do
msleep(1);
while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
inb_p(SMB_HST_DAT1));
if (timeout && !(data & HST_STS_BAD))
return 0;
if (!timeout) {
dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
/* Issue 'kill' to host controller */
outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
data = inb_p(SMB_HST_STS);
status = -ETIMEDOUT;
}
/* device error - no response, ignore the autodetection case */
if (data & HST_STS_DEVERR) {
if (size != HST_CNTL2_QUICK)
dev_err(&a->dev, "Device error!\n");
status = -ENXIO;
}
/* bus collision */
if (data & HST_STS_BUSERR) {
dev_err(&a->dev, "Bus collision!\n");
/* Issue timeout, hoping it helps */
outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1);
}
if (data & HST_STS_FAIL) {
dev_err(&a->dev, "Cleaning fail after KILL!\n");
outb_p(0x0,SMB_HST_CNTL2);
}
return status;
}
static int ali1563_block_start(struct i2c_adapter * a)
{
u32 data;
int timeout;
int status = -EIO;
dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
inb_p(SMB_HST_DAT1));
data = inb_p(SMB_HST_STS);
if (data & HST_STS_BAD) {
dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
outb_p(data | HST_STS_BAD,SMB_HST_STS);
data = inb_p(SMB_HST_STS);
if (data & HST_STS_BAD)
return -EBUSY;
}
/* Clear byte-ready bit */
outb_p(data | HST_STS_DONE, SMB_HST_STS);
/* Start transaction and wait for byte-ready bit to be set */
outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
timeout = ALI1563_MAX_TIMEOUT;
do
msleep(1);
while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
inb_p(SMB_HST_DAT1));
if (timeout && !(data & HST_STS_BAD))
return 0;
if (timeout == 0)
status = -ETIMEDOUT;
if (data & HST_STS_DEVERR)
status = -ENXIO;
dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
timeout ? "" : "Timeout ",
data & HST_STS_FAIL ? "Transaction Failed " : "",
data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
data & HST_STS_DEVERR ? "Device Error " : "",
!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
return status;
}
static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw)
{
int i, len;
int error = 0;
/* Do we need this? */
outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
if (rw == I2C_SMBUS_WRITE) {
len = data->block[0];
if (len < 1)
len = 1;
else if (len > 32)
len = 32;
outb_p(len,SMB_HST_DAT0);
outb_p(data->block[1],SMB_BLK_DAT);
} else
len = 32;
outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2);
for (i = 0; i < len; i++) {
if (rw == I2C_SMBUS_WRITE) {
outb_p(data->block[i + 1], SMB_BLK_DAT);
if ((error = ali1563_block_start(a)))
break;
} else {
if ((error = ali1563_block_start(a)))
break;
if (i == 0) {
len = inb_p(SMB_HST_DAT0);
if (len < 1)
len = 1;
else if (len > 32)
len = 32;
}
data->block[i+1] = inb_p(SMB_BLK_DAT);
}
}
/* Do we need this? */
outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
return error;
}
static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
unsigned short flags, char rw, u8 cmd,
int size, union i2c_smbus_data * data)
{
int error = 0;
int timeout;
u32 reg;
for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
if (!(reg = inb_p(SMB_HST_STS) & HST_STS_BUSY))
break;
}
if (!timeout)
dev_warn(&a->dev,"SMBus not idle. HST_STS = %02x\n",reg);
outb_p(0xff,SMB_HST_STS);
/* Map the size to what the chip understands */
switch (size) {
case I2C_SMBUS_QUICK:
size = HST_CNTL2_QUICK;
break;
case I2C_SMBUS_BYTE:
size = HST_CNTL2_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
size = HST_CNTL2_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
size = HST_CNTL2_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
size = HST_CNTL2_BLOCK;
break;
default:
dev_warn(&a->dev, "Unsupported transaction %d\n", size);
error = -EOPNOTSUPP;
goto Done;
}
outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2);
/* Write the command register */
switch(size) {
case HST_CNTL2_BYTE:
if (rw== I2C_SMBUS_WRITE)
/* Beware it uses DAT0 register and not CMD! */
outb_p(cmd, SMB_HST_DAT0);
break;
case HST_CNTL2_BYTE_DATA:
outb_p(cmd, SMB_HST_CMD);
if (rw == I2C_SMBUS_WRITE)
outb_p(data->byte, SMB_HST_DAT0);
break;
case HST_CNTL2_WORD_DATA:
outb_p(cmd, SMB_HST_CMD);
if (rw == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMB_HST_DAT0);
outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1);
}
break;
case HST_CNTL2_BLOCK:
outb_p(cmd, SMB_HST_CMD);
error = ali1563_block(a,data,rw);
goto Done;
}
if ((error = ali1563_transaction(a, size)))
goto Done;
if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
goto Done;
switch (size) {
case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */
data->byte = inb_p(SMB_HST_DAT0);
break;
case HST_CNTL2_BYTE_DATA:
data->byte = inb_p(SMB_HST_DAT0);
break;
case HST_CNTL2_WORD_DATA:
data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8);
break;
}
Done:
return error;
}
static u32 ali1563_func(struct i2c_adapter * a)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA;
}
static int __devinit ali1563_setup(struct pci_dev * dev)
{
u16 ctrl;
pci_read_config_word(dev,ALI1563_SMBBA,&ctrl);
/* SMB I/O Base in high 12 bits and must be aligned with the
* size of the I/O space. */
ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
if (!ali1563_smba) {
dev_warn(&dev->dev,"ali1563_smba Uninitialized\n");
goto Err;
}
/* Check if device is enabled */
if (!(ctrl & ALI1563_SMB_HOSTEN)) {
dev_warn(&dev->dev, "Host Controller not enabled\n");
goto Err;
}
if (!(ctrl & ALI1563_SMB_IOEN)) {
dev_warn(&dev->dev, "I/O space not enabled, trying manually\n");
pci_write_config_word(dev, ALI1563_SMBBA,
ctrl | ALI1563_SMB_IOEN);
pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
if (!(ctrl & ALI1563_SMB_IOEN)) {
dev_err(&dev->dev, "I/O space still not enabled, "
"giving up\n");
goto Err;
}
}
if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
ali1563_pci_driver.name)) {
dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
ali1563_smba);
goto Err;
}
dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba);
return 0;
Err:
return -ENODEV;
}
static void ali1563_shutdown(struct pci_dev *dev)
{
release_region(ali1563_smba,ALI1563_SMB_IOSIZE);
}
static const struct i2c_algorithm ali1563_algorithm = {
.smbus_xfer = ali1563_access,
.functionality = ali1563_func,
};
static struct i2c_adapter ali1563_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_ALI1563,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &ali1563_algorithm,
};
static int __devinit ali1563_probe(struct pci_dev * dev,
const struct pci_device_id * id_table)
{
int error;
if ((error = ali1563_setup(dev)))
goto exit;
ali1563_adapter.dev.parent = &dev->dev;
sprintf(ali1563_adapter.name,"SMBus ALi 1563 Adapter @ %04x",
ali1563_smba);
if ((error = i2c_add_adapter(&ali1563_adapter)))
goto exit_shutdown;
return 0;
exit_shutdown:
ali1563_shutdown(dev);
exit:
dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error);
return error;
}
static void __devexit ali1563_remove(struct pci_dev * dev)
{
i2c_del_adapter(&ali1563_adapter);
ali1563_shutdown(dev);
}
static struct pci_device_id __devinitdata ali1563_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
{},
};
MODULE_DEVICE_TABLE (pci, ali1563_id_table);
static struct pci_driver ali1563_pci_driver = {
.name = "ali1563_smbus",
.id_table = ali1563_id_table,
.probe = ali1563_probe,
.remove = __devexit_p(ali1563_remove),
};
static int __init ali1563_init(void)
{
return pci_register_driver(&ali1563_pci_driver);
}
module_init(ali1563_init);
static void __exit ali1563_exit(void)
{
pci_unregister_driver(&ali1563_pci_driver);
}
module_exit(ali1563_exit);
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink