linux/arch/i386/boot/compressed/head.S
Segher Boessenkool c6b33cc4e9 [PATCH] Fix insta-reboot with "i386: Relocatable kernel support"
Commit 968de4f026 ("i386: Relocatable
kernel support") caused problems for people with old binutils versions
that didn't mark ".text.*" sections automatically allocated.

So we should use .section command to specifically mark .text.head
section as AX (allocatable and executable) to solve the problem.

This should be unnecessary with binutils 2.15 and later, which is
already three years old, but it doesn't hurt supporting older toolchains
where possible.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-02 13:44:11 -08:00

181 lines
3.8 KiB
ArmAsm

/*
* linux/boot/head.S
*
* Copyright (C) 1991, 1992, 1993 Linus Torvalds
*/
/*
* head.S contains the 32-bit startup code.
*
* NOTE!!! Startup happens at absolute address 0x00001000, which is also where
* the page directory will exist. The startup code will be overwritten by
* the page directory. [According to comments etc elsewhere on a compressed
* kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
*
* Page 0 is deliberately kept safe, since System Management Mode code in
* laptops may need to access the BIOS data stored there. This is also
* useful for future device drivers that either access the BIOS via VM86
* mode.
*/
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
.text
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/boot.h>
.section ".text.head","ax",@progbits
.globl startup_32
startup_32:
cld
cli
movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
movl %eax,%ss
/* Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x34-0x3f are used as the stack for this calculation.
* Only 4 bytes are needed.
*/
leal 0x40(%esi), %esp
call 1f
1: popl %ebp
subl $1b, %ebp
/* %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/
#ifdef CONFIG_RELOCATABLE
movl %ebp, %ebx
addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
#else
movl $LOAD_PHYSICAL_ADDR, %ebx
#endif
/* Replace the compressed data size with the uncompressed size */
subl input_len(%ebp), %ebx
movl output_len(%ebp), %eax
addl %eax, %ebx
/* Add 8 bytes for every 32K input block */
shrl $12, %eax
addl %eax, %ebx
/* Add 32K + 18 bytes of extra slack */
addl $(32768 + 18), %ebx
/* Align on a 4K boundary */
addl $4095, %ebx
andl $~4095, %ebx
/* Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
pushl %esi
leal _end(%ebp), %esi
leal _end(%ebx), %edi
movl $(_end - startup_32), %ecx
std
rep
movsb
cld
popl %esi
/* Compute the kernel start address.
*/
#ifdef CONFIG_RELOCATABLE
addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
#else
movl $LOAD_PHYSICAL_ADDR, %ebp
#endif
/*
* Jump to the relocated address.
*/
leal relocated(%ebx), %eax
jmp *%eax
.section ".text"
relocated:
/*
* Clear BSS
*/
xorl %eax,%eax
leal _edata(%ebx),%edi
leal _end(%ebx), %ecx
subl %edi,%ecx
cld
rep
stosb
/*
* Setup the stack for the decompressor
*/
leal stack_end(%ebx), %esp
/*
* Do the decompression, and jump to the new kernel..
*/
movl output_len(%ebx), %eax
pushl %eax
pushl %ebp # output address
movl input_len(%ebx), %eax
pushl %eax # input_len
leal input_data(%ebx), %eax
pushl %eax # input_data
leal _end(%ebx), %eax
pushl %eax # end of the image as third argument
pushl %esi # real mode pointer as second arg
call decompress_kernel
addl $20, %esp
popl %ecx
#if CONFIG_RELOCATABLE
/* Find the address of the relocations.
*/
movl %ebp, %edi
addl %ecx, %edi
/* Calculate the delta between where vmlinux was compiled to run
* and where it was actually loaded.
*/
movl %ebp, %ebx
subl $LOAD_PHYSICAL_ADDR, %ebx
jz 2f /* Nothing to be done if loaded at compiled addr. */
/*
* Process relocations.
*/
1: subl $4, %edi
movl 0(%edi), %ecx
testl %ecx, %ecx
jz 2f
addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
jmp 1b
2:
#endif
/*
* Jump to the decompressed kernel.
*/
xorl %ebx,%ebx
jmp *%ebp
.bss
.balign 4
stack:
.fill 4096, 1, 0
stack_end: