forked from Minki/linux
2262d6ef51
Moving Exynos PMU specific header file into "include/linux/soc/samsung" thus updated affected files under "mach-exynos" to use new location of these header files. Signed-off-by: Amit Daniel Kachhap <amitdanielk@gmail.com> [tested on Peach-Pi (Exynos5880)] Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [for testing on Trats2 (Exynos4412) and Odroid XU3 (Exynos5422)] Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
352 lines
7.5 KiB
C
352 lines
7.5 KiB
C
/*
|
|
* Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* EXYNOS - Power Management support
|
|
*
|
|
* Based on arch/arm/mach-s3c2410/pm.c
|
|
* Copyright (c) 2006 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <linux/soc/samsung/exynos-regs-pmu.h>
|
|
#include <linux/soc/samsung/exynos-pmu.h>
|
|
|
|
#include <asm/firmware.h>
|
|
#include <asm/smp_scu.h>
|
|
#include <asm/suspend.h>
|
|
#include <asm/cacheflush.h>
|
|
|
|
#include <mach/map.h>
|
|
|
|
#include <plat/pm-common.h>
|
|
|
|
#include "common.h"
|
|
|
|
static inline void __iomem *exynos_boot_vector_addr(void)
|
|
{
|
|
if (samsung_rev() == EXYNOS4210_REV_1_1)
|
|
return pmu_base_addr + S5P_INFORM7;
|
|
else if (samsung_rev() == EXYNOS4210_REV_1_0)
|
|
return sysram_base_addr + 0x24;
|
|
return pmu_base_addr + S5P_INFORM0;
|
|
}
|
|
|
|
static inline void __iomem *exynos_boot_vector_flag(void)
|
|
{
|
|
if (samsung_rev() == EXYNOS4210_REV_1_1)
|
|
return pmu_base_addr + S5P_INFORM6;
|
|
else if (samsung_rev() == EXYNOS4210_REV_1_0)
|
|
return sysram_base_addr + 0x20;
|
|
return pmu_base_addr + S5P_INFORM1;
|
|
}
|
|
|
|
#define S5P_CHECK_AFTR 0xFCBA0D10
|
|
|
|
/* For Cortex-A9 Diagnostic and Power control register */
|
|
static unsigned int save_arm_register[2];
|
|
|
|
void exynos_cpu_save_register(void)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
/* Save Power control register */
|
|
asm ("mrc p15, 0, %0, c15, c0, 0"
|
|
: "=r" (tmp) : : "cc");
|
|
|
|
save_arm_register[0] = tmp;
|
|
|
|
/* Save Diagnostic register */
|
|
asm ("mrc p15, 0, %0, c15, c0, 1"
|
|
: "=r" (tmp) : : "cc");
|
|
|
|
save_arm_register[1] = tmp;
|
|
}
|
|
|
|
void exynos_cpu_restore_register(void)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
/* Restore Power control register */
|
|
tmp = save_arm_register[0];
|
|
|
|
asm volatile ("mcr p15, 0, %0, c15, c0, 0"
|
|
: : "r" (tmp)
|
|
: "cc");
|
|
|
|
/* Restore Diagnostic register */
|
|
tmp = save_arm_register[1];
|
|
|
|
asm volatile ("mcr p15, 0, %0, c15, c0, 1"
|
|
: : "r" (tmp)
|
|
: "cc");
|
|
}
|
|
|
|
void exynos_pm_central_suspend(void)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
/* Setting Central Sequence Register for power down mode */
|
|
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
|
|
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
|
|
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
|
|
}
|
|
|
|
int exynos_pm_central_resume(void)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
/*
|
|
* If PMU failed while entering sleep mode, WFI will be
|
|
* ignored by PMU and then exiting cpu_do_idle().
|
|
* S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
|
|
* in this situation.
|
|
*/
|
|
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
|
|
if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
|
|
tmp |= S5P_CENTRAL_LOWPWR_CFG;
|
|
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
|
|
/* clear the wakeup state register */
|
|
pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
|
|
/* No need to perform below restore code */
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
|
|
static void exynos_set_wakeupmask(long mask)
|
|
{
|
|
pmu_raw_writel(mask, S5P_WAKEUP_MASK);
|
|
if (soc_is_exynos3250())
|
|
pmu_raw_writel(0x0, S5P_WAKEUP_MASK2);
|
|
}
|
|
|
|
static void exynos_cpu_set_boot_vector(long flags)
|
|
{
|
|
__raw_writel(virt_to_phys(exynos_cpu_resume),
|
|
exynos_boot_vector_addr());
|
|
__raw_writel(flags, exynos_boot_vector_flag());
|
|
}
|
|
|
|
static int exynos_aftr_finisher(unsigned long flags)
|
|
{
|
|
int ret;
|
|
|
|
exynos_set_wakeupmask(soc_is_exynos3250() ? 0x40003ffe : 0x0000ff3e);
|
|
/* Set value of power down register for aftr mode */
|
|
exynos_sys_powerdown_conf(SYS_AFTR);
|
|
|
|
ret = call_firmware_op(do_idle, FW_DO_IDLE_AFTR);
|
|
if (ret == -ENOSYS) {
|
|
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
|
|
exynos_cpu_save_register();
|
|
exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
|
|
cpu_do_idle();
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
void exynos_enter_aftr(void)
|
|
{
|
|
unsigned int cpuid = smp_processor_id();
|
|
|
|
cpu_pm_enter();
|
|
|
|
if (soc_is_exynos3250())
|
|
exynos_set_boot_flag(cpuid, C2_STATE);
|
|
|
|
exynos_pm_central_suspend();
|
|
|
|
if (of_machine_is_compatible("samsung,exynos4212") ||
|
|
of_machine_is_compatible("samsung,exynos4412")) {
|
|
/* Setting SEQ_OPTION register */
|
|
pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
|
|
S5P_CENTRAL_SEQ_OPTION);
|
|
}
|
|
|
|
cpu_suspend(0, exynos_aftr_finisher);
|
|
|
|
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
|
|
scu_enable(S5P_VA_SCU);
|
|
if (call_firmware_op(resume) == -ENOSYS)
|
|
exynos_cpu_restore_register();
|
|
}
|
|
|
|
exynos_pm_central_resume();
|
|
|
|
if (soc_is_exynos3250())
|
|
exynos_clear_boot_flag(cpuid, C2_STATE);
|
|
|
|
cpu_pm_exit();
|
|
}
|
|
|
|
#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
|
|
static atomic_t cpu1_wakeup = ATOMIC_INIT(0);
|
|
|
|
static int exynos_cpu0_enter_aftr(void)
|
|
{
|
|
int ret = -1;
|
|
|
|
/*
|
|
* If the other cpu is powered on, we have to power it off, because
|
|
* the AFTR state won't work otherwise
|
|
*/
|
|
if (cpu_online(1)) {
|
|
/*
|
|
* We reach a sync point with the coupled idle state, we know
|
|
* the other cpu will power down itself or will abort the
|
|
* sequence, let's wait for one of these to happen
|
|
*/
|
|
while (exynos_cpu_power_state(1)) {
|
|
unsigned long boot_addr;
|
|
|
|
/*
|
|
* The other cpu may skip idle and boot back
|
|
* up again
|
|
*/
|
|
if (atomic_read(&cpu1_wakeup))
|
|
goto abort;
|
|
|
|
/*
|
|
* The other cpu may bounce through idle and
|
|
* boot back up again, getting stuck in the
|
|
* boot rom code
|
|
*/
|
|
ret = exynos_get_boot_addr(1, &boot_addr);
|
|
if (ret)
|
|
goto fail;
|
|
ret = -1;
|
|
if (boot_addr == 0)
|
|
goto abort;
|
|
|
|
cpu_relax();
|
|
}
|
|
}
|
|
|
|
exynos_enter_aftr();
|
|
ret = 0;
|
|
|
|
abort:
|
|
if (cpu_online(1)) {
|
|
unsigned long boot_addr = virt_to_phys(exynos_cpu_resume);
|
|
|
|
/*
|
|
* Set the boot vector to something non-zero
|
|
*/
|
|
ret = exynos_set_boot_addr(1, boot_addr);
|
|
if (ret)
|
|
goto fail;
|
|
dsb();
|
|
|
|
/*
|
|
* Turn on cpu1 and wait for it to be on
|
|
*/
|
|
exynos_cpu_power_up(1);
|
|
while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN)
|
|
cpu_relax();
|
|
|
|
if (soc_is_exynos3250()) {
|
|
while (!pmu_raw_readl(S5P_PMU_SPARE2) &&
|
|
!atomic_read(&cpu1_wakeup))
|
|
cpu_relax();
|
|
|
|
if (!atomic_read(&cpu1_wakeup))
|
|
exynos_core_restart(1);
|
|
}
|
|
|
|
while (!atomic_read(&cpu1_wakeup)) {
|
|
smp_rmb();
|
|
|
|
/*
|
|
* Poke cpu1 out of the boot rom
|
|
*/
|
|
|
|
ret = exynos_set_boot_addr(1, boot_addr);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
call_firmware_op(cpu_boot, 1);
|
|
|
|
if (soc_is_exynos3250())
|
|
dsb_sev();
|
|
else
|
|
arch_send_wakeup_ipi_mask(cpumask_of(1));
|
|
}
|
|
}
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
static int exynos_wfi_finisher(unsigned long flags)
|
|
{
|
|
if (soc_is_exynos3250())
|
|
flush_cache_all();
|
|
cpu_do_idle();
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int exynos_cpu1_powerdown(void)
|
|
{
|
|
int ret = -1;
|
|
|
|
/*
|
|
* Idle sequence for cpu1
|
|
*/
|
|
if (cpu_pm_enter())
|
|
goto cpu1_aborted;
|
|
|
|
/*
|
|
* Turn off cpu 1
|
|
*/
|
|
exynos_cpu_power_down(1);
|
|
|
|
if (soc_is_exynos3250())
|
|
pmu_raw_writel(0, S5P_PMU_SPARE2);
|
|
|
|
ret = cpu_suspend(0, exynos_wfi_finisher);
|
|
|
|
cpu_pm_exit();
|
|
|
|
cpu1_aborted:
|
|
dsb();
|
|
/*
|
|
* Notify cpu 0 that cpu 1 is awake
|
|
*/
|
|
atomic_set(&cpu1_wakeup, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void exynos_pre_enter_aftr(void)
|
|
{
|
|
unsigned long boot_addr = virt_to_phys(exynos_cpu_resume);
|
|
|
|
(void)exynos_set_boot_addr(1, boot_addr);
|
|
}
|
|
|
|
static void exynos_post_enter_aftr(void)
|
|
{
|
|
atomic_set(&cpu1_wakeup, 0);
|
|
}
|
|
|
|
struct cpuidle_exynos_data cpuidle_coupled_exynos_data = {
|
|
.cpu0_enter_aftr = exynos_cpu0_enter_aftr,
|
|
.cpu1_powerdown = exynos_cpu1_powerdown,
|
|
.pre_enter_aftr = exynos_pre_enter_aftr,
|
|
.post_enter_aftr = exynos_post_enter_aftr,
|
|
};
|
|
#endif /* CONFIG_SMP && CONFIG_ARM_EXYNOS_CPUIDLE */
|