linux/scripts/package/Makefile
Jim Davis 21a59991ce scripts/package/Makefile: rpmbuild is needed for rpm targets
Before rpm release 4.1, in 2002, either the rpm command or the
rpmbuild command could be used in the rpm-pkg or binrpm-pkg targets,
and the Makefile chose the rpm command if the rpmbuild command wasn't
found.

After release 4.1, however, the rpm command could no longer be used in
place of the rpmbuild command.  As the rpmbuild command is not
installed by default, this can lead to failures with the rpm-pkg and
binrpm-pkg targets:

rpm --define "_builddir ." --target \
    x86_64 -bb ./binkernel.spec
    rpm --target: unknown option
    scripts/package/Makefile:60: recipe for target 'binrpm-pkg' failed

Change the Makefile to use rpmbuild unconditionally to avoid this.

Signed-off-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 16:08:05 +02:00

142 lines
5.8 KiB
Makefile

# Makefile for the different targets used to generate full packages of a kernel
# It uses the generic clean infrastructure of kbuild
# RPM target
# ---------------------------------------------------------------------------
# The rpm target generates two rpm files:
# /usr/src/packages/SRPMS/kernel-2.6.7rc2-1.src.rpm
# /usr/src/packages/RPMS/i386/kernel-2.6.7rc2-1.<arch>.rpm
# The src.rpm files includes all source for the kernel being built
# The <arch>.rpm includes kernel configuration, modules etc.
#
# Process to create the rpm files
# a) clean the kernel
# b) Generate .spec file
# c) Build a tar ball, using symlink to make kernel version
# first entry in the path
# d) and pack the result to a tar.gz file
# e) generate the rpm files, based on kernel.spec
# - Use /. to avoid tar packing just the symlink
# Note that the rpm-pkg target cannot be used with KBUILD_OUTPUT,
# but the binrpm-pkg target can; for some reason O= gets ignored.
# Remove hyphens since they have special meaning in RPM filenames
KERNELPATH := kernel-$(subst -,_,$(KERNELRELEASE))
# Include only those top-level files that are needed by make, plus the GPL copy
TAR_CONTENT := $(KBUILD_ALLDIRS) kernel.spec .config .scmversion Makefile \
Kbuild Kconfig COPYING $(wildcard localversion*)
TAR_CONTENT := $(addprefix $(KERNELPATH)/,$(TAR_CONTENT))
MKSPEC := $(srctree)/scripts/package/mkspec
# rpm-pkg
# ---------------------------------------------------------------------------
rpm-pkg rpm: FORCE
@if test "$(objtree)" != "$(srctree)"; then \
echo "Building source + binary RPM is not possible outside the"; \
echo "kernel source tree. Don't set KBUILD_OUTPUT, or use the"; \
echo "binrpm-pkg target instead."; \
false; \
fi
$(MAKE) clean
ln -sf $(srctree) $(KERNELPATH)
$(CONFIG_SHELL) $(MKSPEC) >$(objtree)/kernel.spec
$(CONFIG_SHELL) $(srctree)/scripts/setlocalversion --save-scmversion
tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(TAR_CONTENT)
rm $(KERNELPATH)
rm -f $(objtree)/.scmversion
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
mv -f $(objtree)/.tmp_version $(objtree)/.version
rpmbuild --target $(UTS_MACHINE) -ta $(KERNELPATH).tar.gz
rm $(KERNELPATH).tar.gz kernel.spec
# binrpm-pkg
# ---------------------------------------------------------------------------
binrpm-pkg: FORCE
$(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(MKSPEC) prebuilt > $(objtree)/binkernel.spec
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
mv -f $(objtree)/.tmp_version $(objtree)/.version
rpmbuild --define "_builddir $(objtree)" --target \
$(UTS_MACHINE) -bb $(objtree)/binkernel.spec
rm binkernel.spec
# Deb target
# ---------------------------------------------------------------------------
quiet_cmd_builddeb = BUILDDEB
cmd_builddeb = set -e; \
test `id -u` = 0 || \
test -n "$(KBUILD_PKG_ROOTCMD)" || { \
which fakeroot >/dev/null 2>&1 && \
KBUILD_PKG_ROOTCMD="fakeroot -u"; \
} || { \
echo; \
echo "builddeb must be run as root (or using fakeroot)."; \
echo "KBUILD_PKG_ROOTCMD is unset and fakeroot not found."; \
echo "Try setting KBUILD_PKG_ROOTCMD to a command to acquire"; \
echo "root privileges (e.g., 'fakeroot -u' or 'sudo')."; \
false; \
} && \
\
$$KBUILD_PKG_ROOTCMD $(CONFIG_SHELL) \
$(srctree)/scripts/package/builddeb
deb-pkg: FORCE
$(MAKE) KBUILD_SRC=
$(call cmd,builddeb)
clean-dirs += $(objtree)/debian/
# tarball targets
# ---------------------------------------------------------------------------
tar%pkg: FORCE
$(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
clean-dirs += $(objtree)/tar-install/
# perf-pkg - generate a source tarball with perf source
# ---------------------------------------------------------------------------
perf-tar=perf-$(KERNELVERSION)
quiet_cmd_perf_tar = TAR
cmd_perf_tar = \
git --git-dir=$(srctree)/.git archive --prefix=$(perf-tar)/ \
HEAD^{tree} $$(cd $(srctree); \
echo $$(cat $(srctree)/tools/perf/MANIFEST)) \
-o $(perf-tar).tar; \
mkdir -p $(perf-tar); \
git --git-dir=$(srctree)/.git rev-parse HEAD > $(perf-tar)/HEAD; \
(cd $(srctree)/tools/perf; \
util/PERF-VERSION-GEN ../../$(perf-tar)/ 2>/dev/null); \
tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \
rm -r $(perf-tar); \
$(if $(findstring tar-src,$@),, \
$(if $(findstring bz2,$@),bzip2, \
$(if $(findstring gz,$@),gzip, \
$(if $(findstring xz,$@),xz, \
$(error unknown target $@)))) \
-f -9 $(perf-tar).tar)
perf-%pkg: FORCE
$(call cmd,perf_tar)
# Help text displayed when executing 'make help'
# ---------------------------------------------------------------------------
help: FORCE
@echo ' rpm-pkg - Build both source and binary RPM kernel packages'
@echo ' binrpm-pkg - Build only the binary kernel package'
@echo ' deb-pkg - Build the kernel as a deb package'
@echo ' tar-pkg - Build the kernel as an uncompressed tarball'
@echo ' targz-pkg - Build the kernel as a gzip compressed tarball'
@echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball'
@echo ' tarxz-pkg - Build the kernel as a xz compressed tarball'
@echo ' perf-tar-src-pkg - Build $(perf-tar).tar source tarball'
@echo ' perf-targz-src-pkg - Build $(perf-tar).tar.gz source tarball'
@echo ' perf-tarbz2-src-pkg - Build $(perf-tar).tar.bz2 source tarball'
@echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball'