linux/arch/arm/boot/dts/meson.dtsi
Martin Blumenstingl 200a575b68 ARM: dts: meson: organize devices in their corresponding busses
The Amlogic Meson SoCs have most of the internal peripherals organized
in busses. Use them to make the dts easier to read and to avoid
duplicated register (bus) offset definitions.

The bus information is taken from the vendor kernel:
	#define IO_CBUS_PHY_BASE        0xc1100000  ///2M
	#define IO_AOBUS_PHY_BASE       0xc8100000  ///1M

There are more internal busses (such as the abp bus which seems to
contain audio, HDMI and Mali registers), but since we don't have
drivers for them yet these are not added (yet).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[khilman: minor whitespace fix]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-05-26 11:23:08 -07:00

182 lines
4.9 KiB
Plaintext

/*
* Copyright 2014 Carlo Caione <carlo@caione.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this library; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&gic>;
L2: l2-cache-controller@c4200000 {
compatible = "arm,pl310-cache";
reg = <0xc4200000 0x1000>;
cache-unified;
cache-level = <2>;
};
gic: interrupt-controller@c4301000 {
compatible = "arm,cortex-a9-gic";
reg = <0xc4301000 0x1000>,
<0xc4300100 0x0100>;
interrupt-controller;
#interrupt-cells = <3>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
cbus: cbus@c1100000 {
compatible = "simple-bus";
reg = <0xc1100000 0x200000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xc1100000 0x200000>;
uart_A: serial@84c0 {
compatible = "amlogic,meson-uart";
reg = <0x84c0 0x18>;
interrupts = <0 26 1>;
status = "disabled";
};
uart_B: serial@84dc {
compatible = "amlogic,meson-uart";
reg = <0x84dc 0x18>;
interrupts = <0 75 1>;
status = "disabled";
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson6-i2c";
reg = <0x8500 0x20>;
interrupts = <0 21 1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
reg = <0x8700 0x18>;
interrupts = <0 93 1>;
status = "disabled";
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson6-i2c";
reg = <0x87c0 0x20>;
interrupts = <0 128 1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spifc: spi@8c80 {
compatible = "amlogic,meson6-spifc";
reg = <0x8c80 0x80>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
wdt: watchdog@9900 {
compatible = "amlogic,meson6-wdt";
reg = <0x9900 0x8>;
interrupts = <0 0 1>;
};
timer@9940 {
compatible = "amlogic,meson6-timer";
reg = <0x9940 0x18>;
interrupts = <0 10 1>;
};
};
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0xc8100000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xc8100000 0x100000>;
ir_receiver: ir-receiver@480 {
compatible= "amlogic,meson6-ir";
reg = <0x480 0x20>;
interrupts = <0 15 1>;
status = "disabled";
};
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x4c0 0x18>;
interrupts = <0 90 1>;
status = "disabled";
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson6-i2c";
reg = <0x500 0x20>;
interrupts = <0 92 1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
reg = <0xc9410000 0x10000
0xc1108108 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
status = "disabled";
};
};
}; /* end of / */