forked from Minki/linux
a45f369d47
As reported and found by Johannes Stezenbach: rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check the Michael MIC in hardware. Therefore we have to report to mac80211 that the received frame does not include the Michael MIC. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1009 lines
34 KiB
C
1009 lines
34 KiB
C
/*
|
|
Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
|
|
Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
|
|
Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
|
|
Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
|
|
Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
|
|
Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
|
|
<http://rt2x00.serialmonkey.com>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the
|
|
Free Software Foundation, Inc.,
|
|
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
/*
|
|
Module: rt2800usb
|
|
Abstract: rt2800usb device specific routines.
|
|
Supported chipsets: RT2800U.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include "rt2x00.h"
|
|
#include "rt2x00usb.h"
|
|
#include "rt2800lib.h"
|
|
#include "rt2800.h"
|
|
#include "rt2800usb.h"
|
|
|
|
/*
|
|
* Allow hardware encryption to be disabled.
|
|
*/
|
|
static int modparam_nohwcrypt;
|
|
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
|
|
|
|
/*
|
|
* Queue handlers.
|
|
*/
|
|
static void rt2800usb_start_queue(struct data_queue *queue)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
|
|
u32 reg;
|
|
|
|
switch (queue->qid) {
|
|
case QID_RX:
|
|
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
|
|
break;
|
|
case QID_BEACON:
|
|
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void rt2800usb_stop_queue(struct data_queue *queue)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
|
|
u32 reg;
|
|
|
|
switch (queue->qid) {
|
|
case QID_RX:
|
|
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
|
|
break;
|
|
case QID_BEACON:
|
|
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Firmware functions
|
|
*/
|
|
static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
return FIRMWARE_RT2870;
|
|
}
|
|
|
|
static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
|
|
const u8 *data, const size_t len)
|
|
{
|
|
int status;
|
|
u32 offset;
|
|
u32 length;
|
|
|
|
/*
|
|
* Check which section of the firmware we need.
|
|
*/
|
|
if (rt2x00_rt(rt2x00dev, RT2860) ||
|
|
rt2x00_rt(rt2x00dev, RT2872) ||
|
|
rt2x00_rt(rt2x00dev, RT3070)) {
|
|
offset = 0;
|
|
length = 4096;
|
|
} else {
|
|
offset = 4096;
|
|
length = 4096;
|
|
}
|
|
|
|
/*
|
|
* Write firmware to device.
|
|
*/
|
|
rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
|
|
data + offset, length);
|
|
|
|
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
|
|
rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
|
|
|
|
/*
|
|
* Send firmware request to device to load firmware,
|
|
* we need to specify a long timeout time.
|
|
*/
|
|
status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
|
|
0, USB_MODE_FIRMWARE,
|
|
REGISTER_TIMEOUT_FIRMWARE);
|
|
if (status < 0) {
|
|
ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
|
|
return status;
|
|
}
|
|
|
|
msleep(10);
|
|
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Device state switch handlers.
|
|
*/
|
|
static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
|
|
/*
|
|
* Wait until BBP and RF are ready.
|
|
*/
|
|
if (rt2800_wait_csr_ready(rt2x00dev))
|
|
return -EBUSY;
|
|
|
|
rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
|
|
rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
|
|
|
|
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
|
|
|
|
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
|
|
|
|
rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
|
|
|
|
rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
|
|
USB_MODE_RESET, REGISTER_TIMEOUT);
|
|
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
|
|
if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev)))
|
|
return -EIO;
|
|
|
|
rt2800_register_read(rt2x00dev, USB_DMA_CFG, ®);
|
|
rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0);
|
|
rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
|
|
rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
|
|
/*
|
|
* Total room for RX frames in kilobytes, PBF might still exceed
|
|
* this limit so reduce the number to prevent errors.
|
|
*/
|
|
rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
|
|
((rt2x00dev->ops->rx->entry_num * DATA_FRAME_SIZE)
|
|
/ 1024) - 3);
|
|
rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1);
|
|
rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1);
|
|
rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg);
|
|
|
|
return rt2800_enable_radio(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_disable_radio(rt2x00dev);
|
|
rt2x00usb_disable_radio(rt2x00dev);
|
|
}
|
|
|
|
static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
|
|
enum dev_state state)
|
|
{
|
|
if (state == STATE_AWAKE)
|
|
rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 2);
|
|
else
|
|
rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
|
|
enum dev_state state)
|
|
{
|
|
int retval = 0;
|
|
|
|
switch (state) {
|
|
case STATE_RADIO_ON:
|
|
/*
|
|
* Before the radio can be enabled, the device first has
|
|
* to be woken up. After that it needs a bit of time
|
|
* to be fully awake and then the radio can be enabled.
|
|
*/
|
|
rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
|
|
msleep(1);
|
|
retval = rt2800usb_enable_radio(rt2x00dev);
|
|
break;
|
|
case STATE_RADIO_OFF:
|
|
/*
|
|
* After the radio has been disabled, the device should
|
|
* be put to sleep for powersaving.
|
|
*/
|
|
rt2800usb_disable_radio(rt2x00dev);
|
|
rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
|
|
break;
|
|
case STATE_RADIO_IRQ_ON:
|
|
case STATE_RADIO_IRQ_OFF:
|
|
/* No support, but no error either */
|
|
break;
|
|
case STATE_DEEP_SLEEP:
|
|
case STATE_SLEEP:
|
|
case STATE_STANDBY:
|
|
case STATE_AWAKE:
|
|
retval = rt2800usb_set_state(rt2x00dev, state);
|
|
break;
|
|
default:
|
|
retval = -ENOTSUPP;
|
|
break;
|
|
}
|
|
|
|
if (unlikely(retval))
|
|
ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
|
|
state, retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Watchdog handlers
|
|
*/
|
|
static void rt2800usb_watchdog(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
unsigned int i;
|
|
u32 reg;
|
|
|
|
rt2800_register_read(rt2x00dev, TXRXQ_PCNT, ®);
|
|
if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q)) {
|
|
WARNING(rt2x00dev, "TX HW queue 0 timed out,"
|
|
" invoke forced kick\n");
|
|
|
|
rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40012);
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
udelay(10);
|
|
if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q))
|
|
break;
|
|
}
|
|
|
|
rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
|
|
}
|
|
|
|
rt2800_register_read(rt2x00dev, TXRXQ_PCNT, ®);
|
|
if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q)) {
|
|
WARNING(rt2x00dev, "TX HW queue 1 timed out,"
|
|
" invoke forced kick\n");
|
|
|
|
rt2800_register_write(rt2x00dev, PBF_CFG, 0xf4000a);
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
udelay(10);
|
|
if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q))
|
|
break;
|
|
}
|
|
|
|
rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
|
|
}
|
|
|
|
rt2x00usb_watchdog(rt2x00dev);
|
|
}
|
|
|
|
/*
|
|
* TX descriptor initialization
|
|
*/
|
|
static __le32 *rt2800usb_get_txwi(struct queue_entry *entry)
|
|
{
|
|
if (entry->queue->qid == QID_BEACON)
|
|
return (__le32 *) (entry->skb->data);
|
|
else
|
|
return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
|
|
}
|
|
|
|
static void rt2800usb_write_tx_desc(struct queue_entry *entry,
|
|
struct txentry_desc *txdesc)
|
|
{
|
|
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
|
|
__le32 *txi = (__le32 *) entry->skb->data;
|
|
u32 word;
|
|
|
|
/*
|
|
* Initialize TXINFO descriptor
|
|
*/
|
|
rt2x00_desc_read(txi, 0, &word);
|
|
|
|
/*
|
|
* The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is
|
|
* TXWI + 802.11 header + L2 pad + payload + pad,
|
|
* so need to decrease size of TXINFO and USB end pad.
|
|
*/
|
|
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
|
|
entry->skb->len - TXINFO_DESC_SIZE - 4);
|
|
rt2x00_set_field32(&word, TXINFO_W0_WIV,
|
|
!test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
|
|
rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
|
|
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
|
|
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
|
|
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
|
|
rt2x00_desc_write(txi, 0, word);
|
|
|
|
/*
|
|
* Register descriptor details in skb frame descriptor.
|
|
*/
|
|
skbdesc->flags |= SKBDESC_DESC_IN_SKB;
|
|
skbdesc->desc = txi;
|
|
skbdesc->desc_len = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
|
|
}
|
|
|
|
static void rt2800usb_write_tx_data(struct queue_entry *entry,
|
|
struct txentry_desc *txdesc)
|
|
{
|
|
unsigned int len;
|
|
int err;
|
|
|
|
rt2800_write_tx_data(entry, txdesc);
|
|
|
|
/*
|
|
* pad(1~3 bytes) is added after each 802.11 payload.
|
|
* USB end pad(4 bytes) is added at each USB bulk out packet end.
|
|
* TX frame format is :
|
|
* | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad |
|
|
* |<------------- tx_pkt_len ------------->|
|
|
*/
|
|
len = roundup(entry->skb->len, 4) + 4;
|
|
err = skb_padto(entry->skb, len);
|
|
if (unlikely(err)) {
|
|
WARNING(entry->queue->rt2x00dev, "TX SKB padding error, out of memory\n");
|
|
return;
|
|
}
|
|
|
|
entry->skb->len = len;
|
|
}
|
|
|
|
/*
|
|
* TX data initialization
|
|
*/
|
|
static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
|
|
{
|
|
return entry->skb->len;
|
|
}
|
|
|
|
/*
|
|
* TX control handlers
|
|
*/
|
|
static void rt2800usb_work_txdone(struct work_struct *work)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev =
|
|
container_of(work, struct rt2x00_dev, txdone_work);
|
|
struct data_queue *queue;
|
|
struct queue_entry *entry;
|
|
|
|
rt2800_txdone(rt2x00dev);
|
|
|
|
/*
|
|
* Process any trailing TX status reports for IO failures,
|
|
* we loop until we find the first non-IO error entry. This
|
|
* can either be a frame which is free, is being uploaded,
|
|
* or has completed the upload but didn't have an entry
|
|
* in the TX_STAT_FIFO register yet.
|
|
*/
|
|
tx_queue_for_each(rt2x00dev, queue) {
|
|
while (!rt2x00queue_empty(queue)) {
|
|
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
|
|
|
|
if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
|
|
!test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
|
|
break;
|
|
|
|
rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* RX control handlers
|
|
*/
|
|
static void rt2800usb_fill_rxdone(struct queue_entry *entry,
|
|
struct rxdone_entry_desc *rxdesc)
|
|
{
|
|
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
|
|
__le32 *rxi = (__le32 *)entry->skb->data;
|
|
__le32 *rxd;
|
|
u32 word;
|
|
int rx_pkt_len;
|
|
|
|
/*
|
|
* Copy descriptor to the skbdesc->desc buffer, making it safe from
|
|
* moving of frame data in rt2x00usb.
|
|
*/
|
|
memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
|
|
|
|
/*
|
|
* RX frame format is :
|
|
* | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
|
|
* |<------------ rx_pkt_len -------------->|
|
|
*/
|
|
rt2x00_desc_read(rxi, 0, &word);
|
|
rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN);
|
|
|
|
/*
|
|
* Remove the RXINFO structure from the sbk.
|
|
*/
|
|
skb_pull(entry->skb, RXINFO_DESC_SIZE);
|
|
|
|
/*
|
|
* FIXME: we need to check for rx_pkt_len validity
|
|
*/
|
|
rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
|
|
|
|
/*
|
|
* It is now safe to read the descriptor on all architectures.
|
|
*/
|
|
rt2x00_desc_read(rxd, 0, &word);
|
|
|
|
if (rt2x00_get_field32(word, RXD_W0_CRC_ERROR))
|
|
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
|
|
|
|
rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W0_CIPHER_ERROR);
|
|
|
|
if (rt2x00_get_field32(word, RXD_W0_DECRYPTED)) {
|
|
/*
|
|
* Hardware has stripped IV/EIV data from 802.11 frame during
|
|
* decryption. Unfortunately the descriptor doesn't contain
|
|
* any fields with the EIV/IV data either, so they can't
|
|
* be restored by rt2x00lib.
|
|
*/
|
|
rxdesc->flags |= RX_FLAG_IV_STRIPPED;
|
|
|
|
/*
|
|
* The hardware has already checked the Michael Mic and has
|
|
* stripped it from the frame. Signal this to mac80211.
|
|
*/
|
|
rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
|
|
|
|
if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
|
|
rxdesc->flags |= RX_FLAG_DECRYPTED;
|
|
else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
|
|
rxdesc->flags |= RX_FLAG_MMIC_ERROR;
|
|
}
|
|
|
|
if (rt2x00_get_field32(word, RXD_W0_MY_BSS))
|
|
rxdesc->dev_flags |= RXDONE_MY_BSS;
|
|
|
|
if (rt2x00_get_field32(word, RXD_W0_L2PAD))
|
|
rxdesc->dev_flags |= RXDONE_L2PAD;
|
|
|
|
/*
|
|
* Remove RXD descriptor from end of buffer.
|
|
*/
|
|
skb_trim(entry->skb, rx_pkt_len);
|
|
|
|
/*
|
|
* Process the RXWI structure.
|
|
*/
|
|
rt2800_process_rxwi(entry, rxdesc);
|
|
}
|
|
|
|
/*
|
|
* Device probe functions.
|
|
*/
|
|
static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
if (rt2800_efuse_detect(rt2x00dev))
|
|
rt2800_read_eeprom_efuse(rt2x00dev);
|
|
else
|
|
rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
|
|
EEPROM_SIZE);
|
|
|
|
return rt2800_validate_eeprom(rt2x00dev);
|
|
}
|
|
|
|
static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
int retval;
|
|
|
|
/*
|
|
* Allocate eeprom data.
|
|
*/
|
|
retval = rt2800usb_validate_eeprom(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
retval = rt2800_init_eeprom(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Initialize hw specifications.
|
|
*/
|
|
retval = rt2800_probe_hw_mode(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* This device has multiple filters for control frames
|
|
* and has a separate filter for PS Poll frames.
|
|
*/
|
|
__set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
|
|
__set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
|
|
|
|
/*
|
|
* This device requires firmware.
|
|
*/
|
|
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
|
|
__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
|
|
if (!modparam_nohwcrypt)
|
|
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
|
|
__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
|
|
__set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
|
|
|
|
/*
|
|
* Set the rssi offset.
|
|
*/
|
|
rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
|
|
|
|
/*
|
|
* Overwrite TX done handler
|
|
*/
|
|
PREPARE_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ieee80211_ops rt2800usb_mac80211_ops = {
|
|
.tx = rt2x00mac_tx,
|
|
.start = rt2x00mac_start,
|
|
.stop = rt2x00mac_stop,
|
|
.add_interface = rt2x00mac_add_interface,
|
|
.remove_interface = rt2x00mac_remove_interface,
|
|
.config = rt2x00mac_config,
|
|
.configure_filter = rt2x00mac_configure_filter,
|
|
.set_tim = rt2x00mac_set_tim,
|
|
.set_key = rt2x00mac_set_key,
|
|
.sw_scan_start = rt2x00mac_sw_scan_start,
|
|
.sw_scan_complete = rt2x00mac_sw_scan_complete,
|
|
.get_stats = rt2x00mac_get_stats,
|
|
.get_tkip_seq = rt2800_get_tkip_seq,
|
|
.set_rts_threshold = rt2800_set_rts_threshold,
|
|
.bss_info_changed = rt2x00mac_bss_info_changed,
|
|
.conf_tx = rt2800_conf_tx,
|
|
.get_tsf = rt2800_get_tsf,
|
|
.rfkill_poll = rt2x00mac_rfkill_poll,
|
|
.ampdu_action = rt2800_ampdu_action,
|
|
.flush = rt2x00mac_flush,
|
|
.get_survey = rt2800_get_survey,
|
|
};
|
|
|
|
static const struct rt2800_ops rt2800usb_rt2800_ops = {
|
|
.register_read = rt2x00usb_register_read,
|
|
.register_read_lock = rt2x00usb_register_read_lock,
|
|
.register_write = rt2x00usb_register_write,
|
|
.register_write_lock = rt2x00usb_register_write_lock,
|
|
.register_multiread = rt2x00usb_register_multiread,
|
|
.register_multiwrite = rt2x00usb_register_multiwrite,
|
|
.regbusy_read = rt2x00usb_regbusy_read,
|
|
.drv_write_firmware = rt2800usb_write_firmware,
|
|
.drv_init_registers = rt2800usb_init_registers,
|
|
.drv_get_txwi = rt2800usb_get_txwi,
|
|
};
|
|
|
|
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
|
|
.probe_hw = rt2800usb_probe_hw,
|
|
.get_firmware_name = rt2800usb_get_firmware_name,
|
|
.check_firmware = rt2800_check_firmware,
|
|
.load_firmware = rt2800_load_firmware,
|
|
.initialize = rt2x00usb_initialize,
|
|
.uninitialize = rt2x00usb_uninitialize,
|
|
.clear_entry = rt2x00usb_clear_entry,
|
|
.set_device_state = rt2800usb_set_device_state,
|
|
.rfkill_poll = rt2800_rfkill_poll,
|
|
.link_stats = rt2800_link_stats,
|
|
.reset_tuner = rt2800_reset_tuner,
|
|
.link_tuner = rt2800_link_tuner,
|
|
.watchdog = rt2800usb_watchdog,
|
|
.start_queue = rt2800usb_start_queue,
|
|
.kick_queue = rt2x00usb_kick_queue,
|
|
.stop_queue = rt2800usb_stop_queue,
|
|
.flush_queue = rt2x00usb_flush_queue,
|
|
.write_tx_desc = rt2800usb_write_tx_desc,
|
|
.write_tx_data = rt2800usb_write_tx_data,
|
|
.write_beacon = rt2800_write_beacon,
|
|
.clear_beacon = rt2800_clear_beacon,
|
|
.get_tx_data_len = rt2800usb_get_tx_data_len,
|
|
.fill_rxdone = rt2800usb_fill_rxdone,
|
|
.config_shared_key = rt2800_config_shared_key,
|
|
.config_pairwise_key = rt2800_config_pairwise_key,
|
|
.config_filter = rt2800_config_filter,
|
|
.config_intf = rt2800_config_intf,
|
|
.config_erp = rt2800_config_erp,
|
|
.config_ant = rt2800_config_ant,
|
|
.config = rt2800_config,
|
|
};
|
|
|
|
static const struct data_queue_desc rt2800usb_queue_rx = {
|
|
.entry_num = 128,
|
|
.data_size = AGGREGATION_SIZE,
|
|
.desc_size = RXINFO_DESC_SIZE + RXWI_DESC_SIZE,
|
|
.priv_size = sizeof(struct queue_entry_priv_usb),
|
|
};
|
|
|
|
static const struct data_queue_desc rt2800usb_queue_tx = {
|
|
.entry_num = 64,
|
|
.data_size = AGGREGATION_SIZE,
|
|
.desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
|
|
.priv_size = sizeof(struct queue_entry_priv_usb),
|
|
};
|
|
|
|
static const struct data_queue_desc rt2800usb_queue_bcn = {
|
|
.entry_num = 8,
|
|
.data_size = MGMT_FRAME_SIZE,
|
|
.desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
|
|
.priv_size = sizeof(struct queue_entry_priv_usb),
|
|
};
|
|
|
|
static const struct rt2x00_ops rt2800usb_ops = {
|
|
.name = KBUILD_MODNAME,
|
|
.max_sta_intf = 1,
|
|
.max_ap_intf = 8,
|
|
.eeprom_size = EEPROM_SIZE,
|
|
.rf_size = RF_SIZE,
|
|
.tx_queues = NUM_TX_QUEUES,
|
|
.extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
|
|
.rx = &rt2800usb_queue_rx,
|
|
.tx = &rt2800usb_queue_tx,
|
|
.bcn = &rt2800usb_queue_bcn,
|
|
.lib = &rt2800usb_rt2x00_ops,
|
|
.drv = &rt2800usb_rt2800_ops,
|
|
.hw = &rt2800usb_mac80211_ops,
|
|
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
|
|
.debugfs = &rt2800_rt2x00debug,
|
|
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
|
|
};
|
|
|
|
/*
|
|
* rt2800usb module information.
|
|
*/
|
|
static struct usb_device_id rt2800usb_device_table[] = {
|
|
/* Abocom */
|
|
{ USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* AirTies */
|
|
{ USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Allwin */
|
|
{ USB_DEVICE(0x8516, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x8516, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x8516, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x8516, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x8516, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x8516, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Amit */
|
|
{ USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Askey */
|
|
{ USB_DEVICE(0x1690, 0x0740), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* ASUS */
|
|
{ USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* AzureWave */
|
|
{ USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x13d3, 0x3307), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x13d3, 0x3321), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Belkin */
|
|
{ USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Buffalo */
|
|
{ USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Conceptronic */
|
|
{ USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x14b2, 0x3c28), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Corega */
|
|
{ USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* D-Link */
|
|
{ USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c16), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Draytek */
|
|
{ USB_DEVICE(0x07fa, 0x7712), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Edimax */
|
|
{ USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Encore */
|
|
{ USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* EnGenius */
|
|
{ USB_DEVICE(0x1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1740, 0x9707), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1740, 0x9708), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1740, 0x9709), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Gigabyte */
|
|
{ USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Hawking */
|
|
{ USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0e66, 0x0013), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0e66, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0e66, 0x0018), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* I-O DATA */
|
|
{ USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x04bb, 0x0947), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x04bb, 0x0948), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Linksys */
|
|
{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Logitec */
|
|
{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0789, 0x0166), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Motorola */
|
|
{ USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* MSI */
|
|
{ USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x3821), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x3822), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x3870), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x3871), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x821a), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x822a), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x822b), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x822c), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x870a), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x871a), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x871b), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x871c), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x899a), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Para */
|
|
{ USB_DEVICE(0x20b8, 0x8888), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Pegatron */
|
|
{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Philips */
|
|
{ USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Planex */
|
|
{ USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Quanta */
|
|
{ USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Ralink */
|
|
{ USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Samsung */
|
|
{ USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Siemens */
|
|
{ USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Sitecom */
|
|
{ USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x0047), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x0048), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* SMC */
|
|
{ USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0xa701), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0xa702), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0xa703), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Sparklan */
|
|
{ USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Sweex */
|
|
{ USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* U-Media*/
|
|
{ USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* ZCOM */
|
|
{ USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Zinwell */
|
|
{ USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Zyxel */
|
|
{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
#ifdef CONFIG_RT2800USB_RT33XX
|
|
/* Ralink */
|
|
{ USB_DEVICE(0x148f, 0x3370), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x148f, 0x8070), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Sitecom */
|
|
{ USB_DEVICE(0x0df6, 0x0050), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
#endif
|
|
#ifdef CONFIG_RT2800USB_RT35XX
|
|
/* Allwin */
|
|
{ USB_DEVICE(0x8516, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Askey */
|
|
{ USB_DEVICE(0x1690, 0x0744), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Cisco */
|
|
{ USB_DEVICE(0x167b, 0x4001), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* EnGenius */
|
|
{ USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* I-O DATA */
|
|
{ USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Ralink */
|
|
{ USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Sitecom */
|
|
{ USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Zinwell */
|
|
{ USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
#endif
|
|
#ifdef CONFIG_RT2800USB_UNKNOWN
|
|
/*
|
|
* Unclear what kind of devices these are (they aren't supported by the
|
|
* vendor linux driver).
|
|
*/
|
|
/* Amigo */
|
|
{ USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* ASUS */
|
|
{ USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0b05, 0x1790), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1761, 0x0b05), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* AzureWave */
|
|
{ USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x13d3, 0x3322), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Belkin */
|
|
{ USB_DEVICE(0x050d, 0x825a), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Buffalo */
|
|
{ USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0411, 0x0148), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0411, 0x0150), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x0411, 0x015d), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Conceptronic */
|
|
{ USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Corega */
|
|
{ USB_DEVICE(0x07aa, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07aa, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* D-Link */
|
|
{ USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c15), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c17), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Encore */
|
|
{ USB_DEVICE(0x203d, 0x14a1), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Gemtek */
|
|
{ USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Gigabyte */
|
|
{ USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* LevelOne */
|
|
{ USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Linksys */
|
|
{ USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1737, 0x0078), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Motorola */
|
|
{ USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Ovislink */
|
|
{ USB_DEVICE(0x1b75, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Pegatron */
|
|
{ USB_DEVICE(0x05a6, 0x0101), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1d4d, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x1d4d, 0x0011), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Planex */
|
|
{ USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Qcom */
|
|
{ USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* SMC */
|
|
{ USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0xd522), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x083a, 0xf511), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Sweex */
|
|
{ USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
{ USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
/* Zyxel */
|
|
{ USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) },
|
|
#endif
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_AUTHOR(DRV_PROJECT);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
|
|
MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
|
|
MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
|
|
MODULE_FIRMWARE(FIRMWARE_RT2870);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct usb_driver rt2800usb_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = rt2800usb_device_table,
|
|
.probe = rt2x00usb_probe,
|
|
.disconnect = rt2x00usb_disconnect,
|
|
.suspend = rt2x00usb_suspend,
|
|
.resume = rt2x00usb_resume,
|
|
};
|
|
|
|
static int __init rt2800usb_init(void)
|
|
{
|
|
return usb_register(&rt2800usb_driver);
|
|
}
|
|
|
|
static void __exit rt2800usb_exit(void)
|
|
{
|
|
usb_deregister(&rt2800usb_driver);
|
|
}
|
|
|
|
module_init(rt2800usb_init);
|
|
module_exit(rt2800usb_exit);
|