b3e79e7682
Baikal-T1 Boot Controller provides an access to a RO storages, which are physically mapped into the SoC MMIO space. In particularly there are Internal ROM embedded into the SoC with a pre-installed firmware, externally attached SPI flash (also accessed in the read-only mode) and a memory region, which mirrors one of them in accordance with the currently enabled system boot mode (also called Boot ROM). This commit adds the Internal ROM support to the physmap driver of the MTD kernel subsystem. The driver will create the Internal ROM MTD as long as it is defined in the system dts file. The physically mapped SPI flash region will be used to implement the SPI-mem interface. The mirroring memory region won't be accessible directly since it's redundant due to both bootable regions being exposed anyway. Note we had to create a dedicated code for the ROMs since read from the corresponding memory regions must be done via the dword-aligned addresses. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200920111445.21816-1-Sergey.Semin@baikalelectronics.ru
127 lines
2.9 KiB
C
127 lines
2.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
|
|
*
|
|
* Authors:
|
|
* Serge Semin <Sergey.Semin@baikalelectronics.ru>
|
|
*
|
|
* Baikal-T1 Physically Mapped Internal ROM driver
|
|
*/
|
|
#include <linux/bits.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/xip.h>
|
|
#include <linux/mux/consumer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/string.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "physmap-bt1-rom.h"
|
|
|
|
/*
|
|
* Baikal-T1 SoC ROMs are only accessible by the dword-aligned instructions.
|
|
* We have to take this into account when implementing the data read-methods.
|
|
* Note there is no need in bothering with endianness, since both Baikal-T1
|
|
* CPU and MMIO are LE.
|
|
*/
|
|
static map_word __xipram bt1_rom_map_read(struct map_info *map,
|
|
unsigned long ofs)
|
|
{
|
|
void __iomem *src = map->virt + ofs;
|
|
unsigned long shift;
|
|
map_word ret;
|
|
u32 data;
|
|
|
|
/* Read data within offset dword. */
|
|
shift = (unsigned long)src & 0x3;
|
|
data = readl_relaxed(src - shift);
|
|
if (!shift) {
|
|
ret.x[0] = data;
|
|
return ret;
|
|
}
|
|
ret.x[0] = data >> (shift * BITS_PER_BYTE);
|
|
|
|
/* Read data from the next dword. */
|
|
shift = 4 - shift;
|
|
if (ofs + shift >= map->size)
|
|
return ret;
|
|
|
|
data = readl_relaxed(src + shift);
|
|
ret.x[0] |= data << (shift * BITS_PER_BYTE);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __xipram bt1_rom_map_copy_from(struct map_info *map,
|
|
void *to, unsigned long from,
|
|
ssize_t len)
|
|
{
|
|
void __iomem *src = map->virt + from;
|
|
ssize_t shift, chunk;
|
|
u32 data;
|
|
|
|
if (len <= 0 || from >= map->size)
|
|
return;
|
|
|
|
/* Make sure we don't go over the map limit. */
|
|
len = min_t(ssize_t, map->size - from, len);
|
|
|
|
/*
|
|
* Since requested data size can be pretty big we have to implement
|
|
* the copy procedure as optimal as possible. That's why it's split
|
|
* up into the next three stages: unaligned head, aligned body,
|
|
* unaligned tail.
|
|
*/
|
|
shift = (ssize_t)src & 0x3;
|
|
if (shift) {
|
|
chunk = min_t(ssize_t, 4 - shift, len);
|
|
data = readl_relaxed(src - shift);
|
|
memcpy(to, &data + shift, chunk);
|
|
src += chunk;
|
|
to += chunk;
|
|
len -= chunk;
|
|
}
|
|
|
|
while (len >= 4) {
|
|
data = readl_relaxed(src);
|
|
memcpy(to, &data, 4);
|
|
src += 4;
|
|
to += 4;
|
|
len -= 4;
|
|
}
|
|
|
|
if (len) {
|
|
data = readl_relaxed(src);
|
|
memcpy(to, &data, len);
|
|
}
|
|
}
|
|
|
|
int of_flash_probe_bt1_rom(struct platform_device *pdev,
|
|
struct device_node *np,
|
|
struct map_info *map)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
|
|
/* It's supposed to be read-only MTD. */
|
|
if (!of_device_is_compatible(np, "mtd-rom")) {
|
|
dev_info(dev, "No mtd-rom compatible string\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Multiplatform guard. */
|
|
if (!of_device_is_compatible(np, "baikal,bt1-int-rom"))
|
|
return 0;
|
|
|
|
/* Sanity check the device parameters retrieved from DTB. */
|
|
if (map->bankwidth != 4)
|
|
dev_warn(dev, "Bank width is supposed to be 32 bits wide\n");
|
|
|
|
map->read = bt1_rom_map_read;
|
|
map->copy_from = bt1_rom_map_copy_from;
|
|
|
|
return 0;
|
|
}
|