linux/drivers/perf/arm_pmu.c
Sumit Garg 367c820ef0 arm64: Enable perf events based hard lockup detector
With the recent feature added to enable perf events to use pseudo NMIs
as interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.

One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). So we need to re-initialize lockup detection once
PMU has been initialized.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/1602060704-10921-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-25 15:18:39 +00:00

1015 lines
24 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
#undef DEBUG
/*
* ARM performance counter support.
*
* Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
* Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
*
* This code is based on the sparc64 perf event code, which is in turn based
* on the x86 code.
*/
#define pr_fmt(fmt) "hw perfevents: " fmt
#include <linux/bitmap.h>
#include <linux/cpumask.h>
#include <linux/cpu_pm.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/perf/arm_pmu.h>
#include <linux/slab.h>
#include <linux/sched/clock.h>
#include <linux/spinlock.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <asm/irq_regs.h>
static int armpmu_count_irq_users(const int irq);
struct pmu_irq_ops {
void (*enable_pmuirq)(unsigned int irq);
void (*disable_pmuirq)(unsigned int irq);
void (*free_pmuirq)(unsigned int irq, int cpu, void __percpu *devid);
};
static void armpmu_free_pmuirq(unsigned int irq, int cpu, void __percpu *devid)
{
free_irq(irq, per_cpu_ptr(devid, cpu));
}
static const struct pmu_irq_ops pmuirq_ops = {
.enable_pmuirq = enable_irq,
.disable_pmuirq = disable_irq_nosync,
.free_pmuirq = armpmu_free_pmuirq
};
static void armpmu_free_pmunmi(unsigned int irq, int cpu, void __percpu *devid)
{
free_nmi(irq, per_cpu_ptr(devid, cpu));
}
static const struct pmu_irq_ops pmunmi_ops = {
.enable_pmuirq = enable_nmi,
.disable_pmuirq = disable_nmi_nosync,
.free_pmuirq = armpmu_free_pmunmi
};
static void armpmu_enable_percpu_pmuirq(unsigned int irq)
{
enable_percpu_irq(irq, IRQ_TYPE_NONE);
}
static void armpmu_free_percpu_pmuirq(unsigned int irq, int cpu,
void __percpu *devid)
{
if (armpmu_count_irq_users(irq) == 1)
free_percpu_irq(irq, devid);
}
static const struct pmu_irq_ops percpu_pmuirq_ops = {
.enable_pmuirq = armpmu_enable_percpu_pmuirq,
.disable_pmuirq = disable_percpu_irq,
.free_pmuirq = armpmu_free_percpu_pmuirq
};
static void armpmu_enable_percpu_pmunmi(unsigned int irq)
{
if (!prepare_percpu_nmi(irq))
enable_percpu_nmi(irq, IRQ_TYPE_NONE);
}
static void armpmu_disable_percpu_pmunmi(unsigned int irq)
{
disable_percpu_nmi(irq);
teardown_percpu_nmi(irq);
}
static void armpmu_free_percpu_pmunmi(unsigned int irq, int cpu,
void __percpu *devid)
{
if (armpmu_count_irq_users(irq) == 1)
free_percpu_nmi(irq, devid);
}
static const struct pmu_irq_ops percpu_pmunmi_ops = {
.enable_pmuirq = armpmu_enable_percpu_pmunmi,
.disable_pmuirq = armpmu_disable_percpu_pmunmi,
.free_pmuirq = armpmu_free_percpu_pmunmi
};
static DEFINE_PER_CPU(struct arm_pmu *, cpu_armpmu);
static DEFINE_PER_CPU(int, cpu_irq);
static DEFINE_PER_CPU(const struct pmu_irq_ops *, cpu_irq_ops);
static bool has_nmi;
static inline u64 arm_pmu_event_max_period(struct perf_event *event)
{
if (event->hw.flags & ARMPMU_EVT_64BIT)
return GENMASK_ULL(63, 0);
else
return GENMASK_ULL(31, 0);
}
static int
armpmu_map_cache_event(const unsigned (*cache_map)
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX],
u64 config)
{
unsigned int cache_type, cache_op, cache_result, ret;
cache_type = (config >> 0) & 0xff;
if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
return -EINVAL;
cache_op = (config >> 8) & 0xff;
if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
return -EINVAL;
cache_result = (config >> 16) & 0xff;
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
if (!cache_map)
return -ENOENT;
ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
if (ret == CACHE_OP_UNSUPPORTED)
return -ENOENT;
return ret;
}
static int
armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
{
int mapping;
if (config >= PERF_COUNT_HW_MAX)
return -EINVAL;
if (!event_map)
return -ENOENT;
mapping = (*event_map)[config];
return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
}
static int
armpmu_map_raw_event(u32 raw_event_mask, u64 config)
{
return (int)(config & raw_event_mask);
}
int
armpmu_map_event(struct perf_event *event,
const unsigned (*event_map)[PERF_COUNT_HW_MAX],
const unsigned (*cache_map)
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX],
u32 raw_event_mask)
{
u64 config = event->attr.config;
int type = event->attr.type;
if (type == event->pmu->type)
return armpmu_map_raw_event(raw_event_mask, config);
switch (type) {
case PERF_TYPE_HARDWARE:
return armpmu_map_hw_event(event_map, config);
case PERF_TYPE_HW_CACHE:
return armpmu_map_cache_event(cache_map, config);
case PERF_TYPE_RAW:
return armpmu_map_raw_event(raw_event_mask, config);
}
return -ENOENT;
}
int armpmu_event_set_period(struct perf_event *event)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
u64 max_period;
int ret = 0;
max_period = arm_pmu_event_max_period(event);
if (unlikely(left <= -period)) {
left = period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
if (unlikely(left <= 0)) {
left += period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
/*
* Limit the maximum period to prevent the counter value
* from overtaking the one we are about to program. In
* effect we are reducing max_period to account for
* interrupt latency (and we are being very conservative).
*/
if (left > (max_period >> 1))
left = (max_period >> 1);
local64_set(&hwc->prev_count, (u64)-left);
armpmu->write_counter(event, (u64)(-left) & max_period);
perf_event_update_userpage(event);
return ret;
}
u64 armpmu_event_update(struct perf_event *event)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
u64 delta, prev_raw_count, new_raw_count;
u64 max_period = arm_pmu_event_max_period(event);
again:
prev_raw_count = local64_read(&hwc->prev_count);
new_raw_count = armpmu->read_counter(event);
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count)
goto again;
delta = (new_raw_count - prev_raw_count) & max_period;
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
return new_raw_count;
}
static void
armpmu_read(struct perf_event *event)
{
armpmu_event_update(event);
}
static void
armpmu_stop(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
/*
* ARM pmu always has to update the counter, so ignore
* PERF_EF_UPDATE, see comments in armpmu_start().
*/
if (!(hwc->state & PERF_HES_STOPPED)) {
armpmu->disable(event);
armpmu_event_update(event);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
}
static void armpmu_start(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
/*
* ARM pmu always has to reprogram the period, so ignore
* PERF_EF_RELOAD, see the comment below.
*/
if (flags & PERF_EF_RELOAD)
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
hwc->state = 0;
/*
* Set the period again. Some counters can't be stopped, so when we
* were stopped we simply disabled the IRQ source and the counter
* may have been left counting. If we don't do this step then we may
* get an interrupt too soon or *way* too late if the overflow has
* happened since disabling.
*/
armpmu_event_set_period(event);
armpmu->enable(event);
}
static void
armpmu_del(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
armpmu_stop(event, PERF_EF_UPDATE);
hw_events->events[idx] = NULL;
armpmu->clear_event_idx(hw_events, event);
perf_event_update_userpage(event);
/* Clear the allocated counter */
hwc->idx = -1;
}
static int
armpmu_add(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx;
/* An event following a process won't be stopped earlier */
if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
return -ENOENT;
/* If we don't have a space for the counter then finish early. */
idx = armpmu->get_event_idx(hw_events, event);
if (idx < 0)
return idx;
/*
* If there is an event in the counter we are going to use then make
* sure it is disabled.
*/
event->hw.idx = idx;
armpmu->disable(event);
hw_events->events[idx] = event;
hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
if (flags & PERF_EF_START)
armpmu_start(event, PERF_EF_RELOAD);
/* Propagate our changes to the userspace mapping. */
perf_event_update_userpage(event);
return 0;
}
static int
validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events,
struct perf_event *event)
{
struct arm_pmu *armpmu;
if (is_software_event(event))
return 1;
/*
* Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The
* core perf code won't check that the pmu->ctx == leader->ctx
* until after pmu->event_init(event).
*/
if (event->pmu != pmu)
return 0;
if (event->state < PERF_EVENT_STATE_OFF)
return 1;
if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
return 1;
armpmu = to_arm_pmu(event->pmu);
return armpmu->get_event_idx(hw_events, event) >= 0;
}
static int
validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
struct pmu_hw_events fake_pmu;
/*
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask));
if (!validate_event(event->pmu, &fake_pmu, leader))
return -EINVAL;
for_each_sibling_event(sibling, leader) {
if (!validate_event(event->pmu, &fake_pmu, sibling))
return -EINVAL;
}
if (!validate_event(event->pmu, &fake_pmu, event))
return -EINVAL;
return 0;
}
static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
{
struct arm_pmu *armpmu;
int ret;
u64 start_clock, finish_clock;
/*
* we request the IRQ with a (possibly percpu) struct arm_pmu**, but
* the handlers expect a struct arm_pmu*. The percpu_irq framework will
* do any necessary shifting, we just need to perform the first
* dereference.
*/
armpmu = *(void **)dev;
if (WARN_ON_ONCE(!armpmu))
return IRQ_NONE;
start_clock = sched_clock();
ret = armpmu->handle_irq(armpmu);
finish_clock = sched_clock();
perf_sample_event_took(finish_clock - start_clock);
return ret;
}
static int
__hw_perf_event_init(struct perf_event *event)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int mapping;
hwc->flags = 0;
mapping = armpmu->map_event(event);
if (mapping < 0) {
pr_debug("event %x:%llx not supported\n", event->attr.type,
event->attr.config);
return mapping;
}
/*
* We don't assign an index until we actually place the event onto
* hardware. Use -1 to signify that we haven't decided where to put it
* yet. For SMP systems, each core has it's own PMU so we can't do any
* clever allocation or constraints checking at this point.
*/
hwc->idx = -1;
hwc->config_base = 0;
hwc->config = 0;
hwc->event_base = 0;
/*
* Check whether we need to exclude the counter from certain modes.
*/
if (armpmu->set_event_filter &&
armpmu->set_event_filter(hwc, &event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
return -EOPNOTSUPP;
}
/*
* Store the event encoding into the config_base field.
*/
hwc->config_base |= (unsigned long)mapping;
if (!is_sampling_event(event)) {
/*
* For non-sampling runs, limit the sample_period to half
* of the counter width. That way, the new counter value
* is far less likely to overtake the previous one unless
* you have some serious IRQ latency issues.
*/
hwc->sample_period = arm_pmu_event_max_period(event) >> 1;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
if (event->group_leader != event) {
if (validate_group(event) != 0)
return -EINVAL;
}
return 0;
}
static int armpmu_event_init(struct perf_event *event)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
/*
* Reject CPU-affine events for CPUs that are of a different class to
* that which this PMU handles. Process-following events (where
* event->cpu == -1) can be migrated between CPUs, and thus we have to
* reject them later (in armpmu_add) if they're scheduled on a
* different class of CPU.
*/
if (event->cpu != -1 &&
!cpumask_test_cpu(event->cpu, &armpmu->supported_cpus))
return -ENOENT;
/* does not support taken branch sampling */
if (has_branch_stack(event))
return -EOPNOTSUPP;
if (armpmu->map_event(event) == -ENOENT)
return -ENOENT;
return __hw_perf_event_init(event);
}
static void armpmu_enable(struct pmu *pmu)
{
struct arm_pmu *armpmu = to_arm_pmu(pmu);
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
/* For task-bound events we may be called on other CPUs */
if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
return;
if (enabled)
armpmu->start(armpmu);
}
static void armpmu_disable(struct pmu *pmu)
{
struct arm_pmu *armpmu = to_arm_pmu(pmu);
/* For task-bound events we may be called on other CPUs */
if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
return;
armpmu->stop(armpmu);
}
/*
* In heterogeneous systems, events are specific to a particular
* microarchitecture, and aren't suitable for another. Thus, only match CPUs of
* the same microarchitecture.
*/
static int armpmu_filter_match(struct perf_event *event)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
unsigned int cpu = smp_processor_id();
int ret;
ret = cpumask_test_cpu(cpu, &armpmu->supported_cpus);
if (ret && armpmu->filter_match)
return armpmu->filter_match(event);
return ret;
}
static ssize_t armpmu_cpumask_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct arm_pmu *armpmu = to_arm_pmu(dev_get_drvdata(dev));
return cpumap_print_to_pagebuf(true, buf, &armpmu->supported_cpus);
}
static DEVICE_ATTR(cpus, S_IRUGO, armpmu_cpumask_show, NULL);
static struct attribute *armpmu_common_attrs[] = {
&dev_attr_cpus.attr,
NULL,
};
static struct attribute_group armpmu_common_attr_group = {
.attrs = armpmu_common_attrs,
};
/* Set at runtime when we know what CPU type we are. */
static struct arm_pmu *__oprofile_cpu_pmu;
/*
* Despite the names, these two functions are CPU-specific and are used
* by the OProfile/perf code.
*/
const char *perf_pmu_name(void)
{
if (!__oprofile_cpu_pmu)
return NULL;
return __oprofile_cpu_pmu->name;
}
EXPORT_SYMBOL_GPL(perf_pmu_name);
int perf_num_counters(void)
{
int max_events = 0;
if (__oprofile_cpu_pmu != NULL)
max_events = __oprofile_cpu_pmu->num_events;
return max_events;
}
EXPORT_SYMBOL_GPL(perf_num_counters);
static int armpmu_count_irq_users(const int irq)
{
int cpu, count = 0;
for_each_possible_cpu(cpu) {
if (per_cpu(cpu_irq, cpu) == irq)
count++;
}
return count;
}
static const struct pmu_irq_ops *armpmu_find_irq_ops(int irq)
{
const struct pmu_irq_ops *ops = NULL;
int cpu;
for_each_possible_cpu(cpu) {
if (per_cpu(cpu_irq, cpu) != irq)
continue;
ops = per_cpu(cpu_irq_ops, cpu);
if (ops)
break;
}
return ops;
}
void armpmu_free_irq(int irq, int cpu)
{
if (per_cpu(cpu_irq, cpu) == 0)
return;
if (WARN_ON(irq != per_cpu(cpu_irq, cpu)))
return;
per_cpu(cpu_irq_ops, cpu)->free_pmuirq(irq, cpu, &cpu_armpmu);
per_cpu(cpu_irq, cpu) = 0;
per_cpu(cpu_irq_ops, cpu) = NULL;
}
int armpmu_request_irq(int irq, int cpu)
{
int err = 0;
const irq_handler_t handler = armpmu_dispatch_irq;
const struct pmu_irq_ops *irq_ops;
if (!irq)
return 0;
if (!irq_is_percpu_devid(irq)) {
unsigned long irq_flags;
err = irq_force_affinity(irq, cpumask_of(cpu));
if (err && num_possible_cpus() > 1) {
pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n",
irq, cpu);
goto err_out;
}
irq_flags = IRQF_PERCPU |
IRQF_NOBALANCING |
IRQF_NO_THREAD;
irq_set_status_flags(irq, IRQ_NOAUTOEN);
err = request_nmi(irq, handler, irq_flags, "arm-pmu",
per_cpu_ptr(&cpu_armpmu, cpu));
/* If cannot get an NMI, get a normal interrupt */
if (err) {
err = request_irq(irq, handler, irq_flags, "arm-pmu",
per_cpu_ptr(&cpu_armpmu, cpu));
irq_ops = &pmuirq_ops;
} else {
has_nmi = true;
irq_ops = &pmunmi_ops;
}
} else if (armpmu_count_irq_users(irq) == 0) {
err = request_percpu_nmi(irq, handler, "arm-pmu", &cpu_armpmu);
/* If cannot get an NMI, get a normal interrupt */
if (err) {
err = request_percpu_irq(irq, handler, "arm-pmu",
&cpu_armpmu);
irq_ops = &percpu_pmuirq_ops;
} else {
has_nmi= true;
irq_ops = &percpu_pmunmi_ops;
}
} else {
/* Per cpudevid irq was already requested by another CPU */
irq_ops = armpmu_find_irq_ops(irq);
if (WARN_ON(!irq_ops))
err = -EINVAL;
}
if (err)
goto err_out;
per_cpu(cpu_irq, cpu) = irq;
per_cpu(cpu_irq_ops, cpu) = irq_ops;
return 0;
err_out:
pr_err("unable to request IRQ%d for ARM PMU counters\n", irq);
return err;
}
static int armpmu_get_cpu_irq(struct arm_pmu *pmu, int cpu)
{
struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
return per_cpu(hw_events->irq, cpu);
}
bool arm_pmu_irq_is_nmi(void)
{
return has_nmi;
}
/*
* PMU hardware loses all context when a CPU goes offline.
* When a CPU is hotplugged back in, since some hardware registers are
* UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
* junk values out of them.
*/
static int arm_perf_starting_cpu(unsigned int cpu, struct hlist_node *node)
{
struct arm_pmu *pmu = hlist_entry_safe(node, struct arm_pmu, node);
int irq;
if (!cpumask_test_cpu(cpu, &pmu->supported_cpus))
return 0;
if (pmu->reset)
pmu->reset(pmu);
per_cpu(cpu_armpmu, cpu) = pmu;
irq = armpmu_get_cpu_irq(pmu, cpu);
if (irq)
per_cpu(cpu_irq_ops, cpu)->enable_pmuirq(irq);
return 0;
}
static int arm_perf_teardown_cpu(unsigned int cpu, struct hlist_node *node)
{
struct arm_pmu *pmu = hlist_entry_safe(node, struct arm_pmu, node);
int irq;
if (!cpumask_test_cpu(cpu, &pmu->supported_cpus))
return 0;
irq = armpmu_get_cpu_irq(pmu, cpu);
if (irq)
per_cpu(cpu_irq_ops, cpu)->disable_pmuirq(irq);
per_cpu(cpu_armpmu, cpu) = NULL;
return 0;
}
#ifdef CONFIG_CPU_PM
static void cpu_pm_pmu_setup(struct arm_pmu *armpmu, unsigned long cmd)
{
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
struct perf_event *event;
int idx;
for (idx = 0; idx < armpmu->num_events; idx++) {
event = hw_events->events[idx];
if (!event)
continue;
switch (cmd) {
case CPU_PM_ENTER:
/*
* Stop and update the counter
*/
armpmu_stop(event, PERF_EF_UPDATE);
break;
case CPU_PM_EXIT:
case CPU_PM_ENTER_FAILED:
/*
* Restore and enable the counter.
* armpmu_start() indirectly calls
*
* perf_event_update_userpage()
*
* that requires RCU read locking to be functional,
* wrap the call within RCU_NONIDLE to make the
* RCU subsystem aware this cpu is not idle from
* an RCU perspective for the armpmu_start() call
* duration.
*/
RCU_NONIDLE(armpmu_start(event, PERF_EF_RELOAD));
break;
default:
break;
}
}
}
static int cpu_pm_pmu_notify(struct notifier_block *b, unsigned long cmd,
void *v)
{
struct arm_pmu *armpmu = container_of(b, struct arm_pmu, cpu_pm_nb);
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
return NOTIFY_DONE;
/*
* Always reset the PMU registers on power-up even if
* there are no events running.
*/
if (cmd == CPU_PM_EXIT && armpmu->reset)
armpmu->reset(armpmu);
if (!enabled)
return NOTIFY_OK;
switch (cmd) {
case CPU_PM_ENTER:
armpmu->stop(armpmu);
cpu_pm_pmu_setup(armpmu, cmd);
break;
case CPU_PM_EXIT:
case CPU_PM_ENTER_FAILED:
cpu_pm_pmu_setup(armpmu, cmd);
armpmu->start(armpmu);
break;
default:
return NOTIFY_DONE;
}
return NOTIFY_OK;
}
static int cpu_pm_pmu_register(struct arm_pmu *cpu_pmu)
{
cpu_pmu->cpu_pm_nb.notifier_call = cpu_pm_pmu_notify;
return cpu_pm_register_notifier(&cpu_pmu->cpu_pm_nb);
}
static void cpu_pm_pmu_unregister(struct arm_pmu *cpu_pmu)
{
cpu_pm_unregister_notifier(&cpu_pmu->cpu_pm_nb);
}
#else
static inline int cpu_pm_pmu_register(struct arm_pmu *cpu_pmu) { return 0; }
static inline void cpu_pm_pmu_unregister(struct arm_pmu *cpu_pmu) { }
#endif
static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
{
int err;
err = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_STARTING,
&cpu_pmu->node);
if (err)
goto out;
err = cpu_pm_pmu_register(cpu_pmu);
if (err)
goto out_unregister;
return 0;
out_unregister:
cpuhp_state_remove_instance_nocalls(CPUHP_AP_PERF_ARM_STARTING,
&cpu_pmu->node);
out:
return err;
}
static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu)
{
cpu_pm_pmu_unregister(cpu_pmu);
cpuhp_state_remove_instance_nocalls(CPUHP_AP_PERF_ARM_STARTING,
&cpu_pmu->node);
}
static struct arm_pmu *__armpmu_alloc(gfp_t flags)
{
struct arm_pmu *pmu;
int cpu;
pmu = kzalloc(sizeof(*pmu), flags);
if (!pmu) {
pr_info("failed to allocate PMU device!\n");
goto out;
}
pmu->hw_events = alloc_percpu_gfp(struct pmu_hw_events, flags);
if (!pmu->hw_events) {
pr_info("failed to allocate per-cpu PMU data.\n");
goto out_free_pmu;
}
pmu->pmu = (struct pmu) {
.pmu_enable = armpmu_enable,
.pmu_disable = armpmu_disable,
.event_init = armpmu_event_init,
.add = armpmu_add,
.del = armpmu_del,
.start = armpmu_start,
.stop = armpmu_stop,
.read = armpmu_read,
.filter_match = armpmu_filter_match,
.attr_groups = pmu->attr_groups,
/*
* This is a CPU PMU potentially in a heterogeneous
* configuration (e.g. big.LITTLE). This is not an uncore PMU,
* and we have taken ctx sharing into account (e.g. with our
* pmu::filter_match callback and pmu::event_init group
* validation).
*/
.capabilities = PERF_PMU_CAP_HETEROGENEOUS_CPUS,
};
pmu->attr_groups[ARMPMU_ATTR_GROUP_COMMON] =
&armpmu_common_attr_group;
for_each_possible_cpu(cpu) {
struct pmu_hw_events *events;
events = per_cpu_ptr(pmu->hw_events, cpu);
raw_spin_lock_init(&events->pmu_lock);
events->percpu_pmu = pmu;
}
return pmu;
out_free_pmu:
kfree(pmu);
out:
return NULL;
}
struct arm_pmu *armpmu_alloc(void)
{
return __armpmu_alloc(GFP_KERNEL);
}
struct arm_pmu *armpmu_alloc_atomic(void)
{
return __armpmu_alloc(GFP_ATOMIC);
}
void armpmu_free(struct arm_pmu *pmu)
{
free_percpu(pmu->hw_events);
kfree(pmu);
}
int armpmu_register(struct arm_pmu *pmu)
{
int ret;
ret = cpu_pmu_init(pmu);
if (ret)
return ret;
if (!pmu->set_event_filter)
pmu->pmu.capabilities |= PERF_PMU_CAP_NO_EXCLUDE;
ret = perf_pmu_register(&pmu->pmu, pmu->name, -1);
if (ret)
goto out_destroy;
if (!__oprofile_cpu_pmu)
__oprofile_cpu_pmu = pmu;
pr_info("enabled with %s PMU driver, %d counters available%s\n",
pmu->name, pmu->num_events,
has_nmi ? ", using NMIs" : "");
return 0;
out_destroy:
cpu_pmu_destroy(pmu);
return ret;
}
static int arm_pmu_hp_init(void)
{
int ret;
ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_STARTING,
"perf/arm/pmu:starting",
arm_perf_starting_cpu,
arm_perf_teardown_cpu);
if (ret)
pr_err("CPU hotplug notifier for ARM PMU could not be registered: %d\n",
ret);
return ret;
}
subsys_initcall(arm_pmu_hp_init);