forked from Minki/linux
dfd7f2c1c5
There is nothing to prevent multiple commands being executed
simultaneously. Add a mutex to prevent this.
Fixes: 606397d67f
("fsi: Add ast2600 master driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201120004929.185239-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
660 lines
16 KiB
C
660 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
// Copyright (C) IBM Corporation 2018
|
|
// FSI master driver for AST2600
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fsi.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/gpio/consumer.h>
|
|
|
|
#include "fsi-master.h"
|
|
|
|
struct fsi_master_aspeed {
|
|
struct fsi_master master;
|
|
struct mutex lock; /* protect HW access */
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct gpio_desc *cfam_reset_gpio;
|
|
};
|
|
|
|
#define to_fsi_master_aspeed(m) \
|
|
container_of(m, struct fsi_master_aspeed, master)
|
|
|
|
/* Control register (size 0x400) */
|
|
static const u32 ctrl_base = 0x80000000;
|
|
|
|
static const u32 fsi_base = 0xa0000000;
|
|
|
|
#define OPB_FSI_VER 0x00
|
|
#define OPB_TRIGGER 0x04
|
|
#define OPB_CTRL_BASE 0x08
|
|
#define OPB_FSI_BASE 0x0c
|
|
#define OPB_CLK_SYNC 0x3c
|
|
#define OPB_IRQ_CLEAR 0x40
|
|
#define OPB_IRQ_MASK 0x44
|
|
#define OPB_IRQ_STATUS 0x48
|
|
|
|
#define OPB0_SELECT 0x10
|
|
#define OPB0_RW 0x14
|
|
#define OPB0_XFER_SIZE 0x18
|
|
#define OPB0_FSI_ADDR 0x1c
|
|
#define OPB0_FSI_DATA_W 0x20
|
|
#define OPB0_STATUS 0x80
|
|
#define OPB0_FSI_DATA_R 0x84
|
|
|
|
#define OPB0_WRITE_ORDER1 0x4c
|
|
#define OPB0_WRITE_ORDER2 0x50
|
|
#define OPB1_WRITE_ORDER1 0x54
|
|
#define OPB1_WRITE_ORDER2 0x58
|
|
#define OPB0_READ_ORDER1 0x5c
|
|
#define OPB1_READ_ORDER2 0x60
|
|
|
|
#define OPB_RETRY_COUNTER 0x64
|
|
|
|
/* OPBn_STATUS */
|
|
#define STATUS_HALFWORD_ACK BIT(0)
|
|
#define STATUS_FULLWORD_ACK BIT(1)
|
|
#define STATUS_ERR_ACK BIT(2)
|
|
#define STATUS_RETRY BIT(3)
|
|
#define STATUS_TIMEOUT BIT(4)
|
|
|
|
/* OPB_IRQ_MASK */
|
|
#define OPB1_XFER_ACK_EN BIT(17)
|
|
#define OPB0_XFER_ACK_EN BIT(16)
|
|
|
|
/* OPB_RW */
|
|
#define CMD_READ BIT(0)
|
|
#define CMD_WRITE 0
|
|
|
|
/* OPBx_XFER_SIZE */
|
|
#define XFER_FULLWORD (BIT(1) | BIT(0))
|
|
#define XFER_HALFWORD (BIT(0))
|
|
#define XFER_BYTE (0)
|
|
|
|
#define CREATE_TRACE_POINTS
|
|
#include <trace/events/fsi_master_aspeed.h>
|
|
|
|
#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */
|
|
|
|
/* Run the bus at maximum speed by default */
|
|
#define FSI_DIVISOR_DEFAULT 1
|
|
#define FSI_DIVISOR_CABLED 2
|
|
static u16 aspeed_fsi_divisor = FSI_DIVISOR_DEFAULT;
|
|
module_param_named(bus_div,aspeed_fsi_divisor, ushort, 0);
|
|
|
|
#define OPB_POLL_TIMEOUT 10000
|
|
|
|
static int __opb_write(struct fsi_master_aspeed *aspeed, u32 addr,
|
|
u32 val, u32 transfer_size)
|
|
{
|
|
void __iomem *base = aspeed->base;
|
|
u32 reg, status;
|
|
int ret;
|
|
|
|
writel(CMD_WRITE, base + OPB0_RW);
|
|
writel(transfer_size, base + OPB0_XFER_SIZE);
|
|
writel(addr, base + OPB0_FSI_ADDR);
|
|
writel(val, base + OPB0_FSI_DATA_W);
|
|
writel(0x1, base + OPB_IRQ_CLEAR);
|
|
writel(0x1, base + OPB_TRIGGER);
|
|
|
|
ret = readl_poll_timeout(base + OPB_IRQ_STATUS, reg,
|
|
(reg & OPB0_XFER_ACK_EN) != 0,
|
|
0, OPB_POLL_TIMEOUT);
|
|
|
|
status = readl(base + OPB0_STATUS);
|
|
|
|
trace_fsi_master_aspeed_opb_write(addr, val, transfer_size, status, reg);
|
|
|
|
/* Return error when poll timed out */
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Command failed, master will reset */
|
|
if (status & STATUS_ERR_ACK)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int opb_writeb(struct fsi_master_aspeed *aspeed, u32 addr, u8 val)
|
|
{
|
|
return __opb_write(aspeed, addr, val, XFER_BYTE);
|
|
}
|
|
|
|
static int opb_writew(struct fsi_master_aspeed *aspeed, u32 addr, __be16 val)
|
|
{
|
|
return __opb_write(aspeed, addr, (__force u16)val, XFER_HALFWORD);
|
|
}
|
|
|
|
static int opb_writel(struct fsi_master_aspeed *aspeed, u32 addr, __be32 val)
|
|
{
|
|
return __opb_write(aspeed, addr, (__force u32)val, XFER_FULLWORD);
|
|
}
|
|
|
|
static int __opb_read(struct fsi_master_aspeed *aspeed, uint32_t addr,
|
|
u32 transfer_size, void *out)
|
|
{
|
|
void __iomem *base = aspeed->base;
|
|
u32 result, reg;
|
|
int status, ret;
|
|
|
|
writel(CMD_READ, base + OPB0_RW);
|
|
writel(transfer_size, base + OPB0_XFER_SIZE);
|
|
writel(addr, base + OPB0_FSI_ADDR);
|
|
writel(0x1, base + OPB_IRQ_CLEAR);
|
|
writel(0x1, base + OPB_TRIGGER);
|
|
|
|
ret = readl_poll_timeout(base + OPB_IRQ_STATUS, reg,
|
|
(reg & OPB0_XFER_ACK_EN) != 0,
|
|
0, OPB_POLL_TIMEOUT);
|
|
|
|
status = readl(base + OPB0_STATUS);
|
|
|
|
result = readl(base + OPB0_FSI_DATA_R);
|
|
|
|
trace_fsi_master_aspeed_opb_read(addr, transfer_size, result,
|
|
readl(base + OPB0_STATUS),
|
|
reg);
|
|
|
|
/* Return error when poll timed out */
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Command failed, master will reset */
|
|
if (status & STATUS_ERR_ACK)
|
|
return -EIO;
|
|
|
|
if (out) {
|
|
switch (transfer_size) {
|
|
case XFER_BYTE:
|
|
*(u8 *)out = result;
|
|
break;
|
|
case XFER_HALFWORD:
|
|
*(u16 *)out = result;
|
|
break;
|
|
case XFER_FULLWORD:
|
|
*(u32 *)out = result;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int opb_readl(struct fsi_master_aspeed *aspeed, uint32_t addr, __be32 *out)
|
|
{
|
|
return __opb_read(aspeed, addr, XFER_FULLWORD, out);
|
|
}
|
|
|
|
static int opb_readw(struct fsi_master_aspeed *aspeed, uint32_t addr, __be16 *out)
|
|
{
|
|
return __opb_read(aspeed, addr, XFER_HALFWORD, (void *)out);
|
|
}
|
|
|
|
static int opb_readb(struct fsi_master_aspeed *aspeed, uint32_t addr, u8 *out)
|
|
{
|
|
return __opb_read(aspeed, addr, XFER_BYTE, (void *)out);
|
|
}
|
|
|
|
static int check_errors(struct fsi_master_aspeed *aspeed, int err)
|
|
{
|
|
int ret;
|
|
|
|
if (trace_fsi_master_aspeed_opb_error_enabled()) {
|
|
__be32 mresp0, mstap0, mesrb0;
|
|
|
|
opb_readl(aspeed, ctrl_base + FSI_MRESP0, &mresp0);
|
|
opb_readl(aspeed, ctrl_base + FSI_MSTAP0, &mstap0);
|
|
opb_readl(aspeed, ctrl_base + FSI_MESRB0, &mesrb0);
|
|
|
|
trace_fsi_master_aspeed_opb_error(
|
|
be32_to_cpu(mresp0),
|
|
be32_to_cpu(mstap0),
|
|
be32_to_cpu(mesrb0));
|
|
}
|
|
|
|
if (err == -EIO) {
|
|
/* Check MAEB (0x70) ? */
|
|
|
|
/* Then clear errors in master */
|
|
ret = opb_writel(aspeed, ctrl_base + FSI_MRESP0,
|
|
cpu_to_be32(FSI_MRESP_RST_ALL_MASTER));
|
|
if (ret) {
|
|
/* TODO: log? return different code? */
|
|
return ret;
|
|
}
|
|
/* TODO: confirm that 0x70 was okay */
|
|
}
|
|
|
|
/* This will pass through timeout errors */
|
|
return err;
|
|
}
|
|
|
|
static int aspeed_master_read(struct fsi_master *master, int link,
|
|
uint8_t id, uint32_t addr, void *val, size_t size)
|
|
{
|
|
struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
|
|
int ret;
|
|
|
|
if (id > 0x3)
|
|
return -EINVAL;
|
|
|
|
addr |= id << 21;
|
|
addr += link * FSI_HUB_LINK_SIZE;
|
|
|
|
mutex_lock(&aspeed->lock);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
ret = opb_readb(aspeed, fsi_base + addr, val);
|
|
break;
|
|
case 2:
|
|
ret = opb_readw(aspeed, fsi_base + addr, val);
|
|
break;
|
|
case 4:
|
|
ret = opb_readl(aspeed, fsi_base + addr, val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
ret = check_errors(aspeed, ret);
|
|
done:
|
|
mutex_unlock(&aspeed->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int aspeed_master_write(struct fsi_master *master, int link,
|
|
uint8_t id, uint32_t addr, const void *val, size_t size)
|
|
{
|
|
struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
|
|
int ret;
|
|
|
|
if (id > 0x3)
|
|
return -EINVAL;
|
|
|
|
addr |= id << 21;
|
|
addr += link * FSI_HUB_LINK_SIZE;
|
|
|
|
mutex_lock(&aspeed->lock);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
ret = opb_writeb(aspeed, fsi_base + addr, *(u8 *)val);
|
|
break;
|
|
case 2:
|
|
ret = opb_writew(aspeed, fsi_base + addr, *(__be16 *)val);
|
|
break;
|
|
case 4:
|
|
ret = opb_writel(aspeed, fsi_base + addr, *(__be32 *)val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
ret = check_errors(aspeed, ret);
|
|
done:
|
|
mutex_unlock(&aspeed->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int aspeed_master_link_enable(struct fsi_master *master, int link,
|
|
bool enable)
|
|
{
|
|
struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
|
|
int idx, bit, ret;
|
|
__be32 reg;
|
|
|
|
idx = link / 32;
|
|
bit = link % 32;
|
|
|
|
reg = cpu_to_be32(0x80000000 >> bit);
|
|
|
|
mutex_lock(&aspeed->lock);
|
|
|
|
if (!enable) {
|
|
ret = opb_writel(aspeed, ctrl_base + FSI_MCENP0 + (4 * idx), reg);
|
|
goto done;
|
|
}
|
|
|
|
ret = opb_writel(aspeed, ctrl_base + FSI_MSENP0 + (4 * idx), reg);
|
|
if (ret)
|
|
goto done;
|
|
|
|
mdelay(FSI_LINK_ENABLE_SETUP_TIME);
|
|
done:
|
|
mutex_unlock(&aspeed->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int aspeed_master_term(struct fsi_master *master, int link, uint8_t id)
|
|
{
|
|
uint32_t addr;
|
|
__be32 cmd;
|
|
|
|
addr = 0x4;
|
|
cmd = cpu_to_be32(0xecc00000);
|
|
|
|
return aspeed_master_write(master, link, id, addr, &cmd, 4);
|
|
}
|
|
|
|
static int aspeed_master_break(struct fsi_master *master, int link)
|
|
{
|
|
uint32_t addr;
|
|
__be32 cmd;
|
|
|
|
addr = 0x0;
|
|
cmd = cpu_to_be32(0xc0de0000);
|
|
|
|
return aspeed_master_write(master, link, 0, addr, &cmd, 4);
|
|
}
|
|
|
|
static void aspeed_master_release(struct device *dev)
|
|
{
|
|
struct fsi_master_aspeed *aspeed =
|
|
to_fsi_master_aspeed(dev_to_fsi_master(dev));
|
|
|
|
kfree(aspeed);
|
|
}
|
|
|
|
/* mmode encoders */
|
|
static inline u32 fsi_mmode_crs0(u32 x)
|
|
{
|
|
return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
|
|
}
|
|
|
|
static inline u32 fsi_mmode_crs1(u32 x)
|
|
{
|
|
return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
|
|
}
|
|
|
|
static int aspeed_master_init(struct fsi_master_aspeed *aspeed)
|
|
{
|
|
__be32 reg;
|
|
|
|
reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
|
|
| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
|
|
opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg);
|
|
|
|
/* Initialize the MFSI (hub master) engine */
|
|
reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
|
|
| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
|
|
opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg);
|
|
|
|
reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
|
|
opb_writel(aspeed, ctrl_base + FSI_MECTRL, reg);
|
|
|
|
reg = cpu_to_be32(FSI_MMODE_ECRC | FSI_MMODE_EPC | FSI_MMODE_RELA
|
|
| fsi_mmode_crs0(aspeed_fsi_divisor)
|
|
| fsi_mmode_crs1(aspeed_fsi_divisor)
|
|
| FSI_MMODE_P8_TO_LSB);
|
|
dev_info(aspeed->dev, "mmode set to %08x (divisor %d)\n",
|
|
be32_to_cpu(reg), aspeed_fsi_divisor);
|
|
opb_writel(aspeed, ctrl_base + FSI_MMODE, reg);
|
|
|
|
reg = cpu_to_be32(0xffff0000);
|
|
opb_writel(aspeed, ctrl_base + FSI_MDLYR, reg);
|
|
|
|
reg = cpu_to_be32(~0);
|
|
opb_writel(aspeed, ctrl_base + FSI_MSENP0, reg);
|
|
|
|
/* Leave enabled long enough for master logic to set up */
|
|
mdelay(FSI_LINK_ENABLE_SETUP_TIME);
|
|
|
|
opb_writel(aspeed, ctrl_base + FSI_MCENP0, reg);
|
|
|
|
opb_readl(aspeed, ctrl_base + FSI_MAEB, NULL);
|
|
|
|
reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
|
|
opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg);
|
|
|
|
opb_readl(aspeed, ctrl_base + FSI_MLEVP0, NULL);
|
|
|
|
/* Reset the master bridge */
|
|
reg = cpu_to_be32(FSI_MRESB_RST_GEN);
|
|
opb_writel(aspeed, ctrl_base + FSI_MRESB0, reg);
|
|
|
|
reg = cpu_to_be32(FSI_MRESB_RST_ERR);
|
|
opb_writel(aspeed, ctrl_base + FSI_MRESB0, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t cfam_reset_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct fsi_master_aspeed *aspeed = dev_get_drvdata(dev);
|
|
|
|
mutex_lock(&aspeed->lock);
|
|
gpiod_set_value(aspeed->cfam_reset_gpio, 1);
|
|
usleep_range(900, 1000);
|
|
gpiod_set_value(aspeed->cfam_reset_gpio, 0);
|
|
mutex_unlock(&aspeed->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(cfam_reset, 0200, NULL, cfam_reset_store);
|
|
|
|
static int setup_cfam_reset(struct fsi_master_aspeed *aspeed)
|
|
{
|
|
struct device *dev = aspeed->dev;
|
|
struct gpio_desc *gpio;
|
|
int rc;
|
|
|
|
gpio = devm_gpiod_get_optional(dev, "cfam-reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(gpio))
|
|
return PTR_ERR(gpio);
|
|
if (!gpio)
|
|
return 0;
|
|
|
|
aspeed->cfam_reset_gpio = gpio;
|
|
|
|
rc = device_create_file(dev, &dev_attr_cfam_reset);
|
|
if (rc) {
|
|
devm_gpiod_put(dev, gpio);
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tacoma_cabled_fsi_fixup(struct device *dev)
|
|
{
|
|
struct gpio_desc *routing_gpio, *mux_gpio;
|
|
int gpio;
|
|
|
|
/*
|
|
* The routing GPIO is a jumper indicating we should mux for the
|
|
* externally connected FSI cable.
|
|
*/
|
|
routing_gpio = devm_gpiod_get_optional(dev, "fsi-routing",
|
|
GPIOD_IN | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
|
|
if (IS_ERR(routing_gpio))
|
|
return PTR_ERR(routing_gpio);
|
|
if (!routing_gpio)
|
|
return 0;
|
|
|
|
mux_gpio = devm_gpiod_get_optional(dev, "fsi-mux", GPIOD_ASIS);
|
|
if (IS_ERR(mux_gpio))
|
|
return PTR_ERR(mux_gpio);
|
|
if (!mux_gpio)
|
|
return 0;
|
|
|
|
gpio = gpiod_get_value(routing_gpio);
|
|
if (gpio < 0)
|
|
return gpio;
|
|
|
|
/* If the routing GPIO is high we should set the mux to low. */
|
|
if (gpio) {
|
|
/*
|
|
* Cable signal integrity means we should run the bus
|
|
* slightly slower. Do not override if a kernel param
|
|
* has already overridden.
|
|
*/
|
|
if (aspeed_fsi_divisor == FSI_DIVISOR_DEFAULT)
|
|
aspeed_fsi_divisor = FSI_DIVISOR_CABLED;
|
|
|
|
gpiod_direction_output(mux_gpio, 0);
|
|
dev_info(dev, "FSI configured for external cable\n");
|
|
} else {
|
|
gpiod_direction_output(mux_gpio, 1);
|
|
}
|
|
|
|
devm_gpiod_put(dev, routing_gpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsi_master_aspeed_probe(struct platform_device *pdev)
|
|
{
|
|
struct fsi_master_aspeed *aspeed;
|
|
struct resource *res;
|
|
int rc, links, reg;
|
|
__be32 raw;
|
|
|
|
rc = tacoma_cabled_fsi_fixup(&pdev->dev);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "Tacoma FSI cable fixup failed\n");
|
|
return rc;
|
|
}
|
|
|
|
aspeed = devm_kzalloc(&pdev->dev, sizeof(*aspeed), GFP_KERNEL);
|
|
if (!aspeed)
|
|
return -ENOMEM;
|
|
|
|
aspeed->dev = &pdev->dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
aspeed->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(aspeed->base))
|
|
return PTR_ERR(aspeed->base);
|
|
|
|
aspeed->clk = devm_clk_get(aspeed->dev, NULL);
|
|
if (IS_ERR(aspeed->clk)) {
|
|
dev_err(aspeed->dev, "couldn't get clock\n");
|
|
return PTR_ERR(aspeed->clk);
|
|
}
|
|
rc = clk_prepare_enable(aspeed->clk);
|
|
if (rc) {
|
|
dev_err(aspeed->dev, "couldn't enable clock\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = setup_cfam_reset(aspeed);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "CFAM reset GPIO setup failed\n");
|
|
}
|
|
|
|
writel(0x1, aspeed->base + OPB_CLK_SYNC);
|
|
writel(OPB1_XFER_ACK_EN | OPB0_XFER_ACK_EN,
|
|
aspeed->base + OPB_IRQ_MASK);
|
|
|
|
/* TODO: determine an appropriate value */
|
|
writel(0x10, aspeed->base + OPB_RETRY_COUNTER);
|
|
|
|
writel(ctrl_base, aspeed->base + OPB_CTRL_BASE);
|
|
writel(fsi_base, aspeed->base + OPB_FSI_BASE);
|
|
|
|
/* Set read data order */
|
|
writel(0x00030b1b, aspeed->base + OPB0_READ_ORDER1);
|
|
|
|
/* Set write data order */
|
|
writel(0x0011101b, aspeed->base + OPB0_WRITE_ORDER1);
|
|
writel(0x0c330f3f, aspeed->base + OPB0_WRITE_ORDER2);
|
|
|
|
/*
|
|
* Select OPB0 for all operations.
|
|
* Will need to be reworked when enabling DMA or anything that uses
|
|
* OPB1.
|
|
*/
|
|
writel(0x1, aspeed->base + OPB0_SELECT);
|
|
|
|
rc = opb_readl(aspeed, ctrl_base + FSI_MVER, &raw);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "failed to read hub version\n");
|
|
return rc;
|
|
}
|
|
|
|
reg = be32_to_cpu(raw);
|
|
links = (reg >> 8) & 0xff;
|
|
dev_info(&pdev->dev, "hub version %08x (%d links)\n", reg, links);
|
|
|
|
aspeed->master.dev.parent = &pdev->dev;
|
|
aspeed->master.dev.release = aspeed_master_release;
|
|
aspeed->master.dev.of_node = of_node_get(dev_of_node(&pdev->dev));
|
|
|
|
aspeed->master.n_links = links;
|
|
aspeed->master.read = aspeed_master_read;
|
|
aspeed->master.write = aspeed_master_write;
|
|
aspeed->master.send_break = aspeed_master_break;
|
|
aspeed->master.term = aspeed_master_term;
|
|
aspeed->master.link_enable = aspeed_master_link_enable;
|
|
|
|
dev_set_drvdata(&pdev->dev, aspeed);
|
|
|
|
mutex_init(&aspeed->lock);
|
|
aspeed_master_init(aspeed);
|
|
|
|
rc = fsi_master_register(&aspeed->master);
|
|
if (rc)
|
|
goto err_release;
|
|
|
|
/* At this point, fsi_master_register performs the device_initialize(),
|
|
* and holds the sole reference on master.dev. This means the device
|
|
* will be freed (via ->release) during any subsequent call to
|
|
* fsi_master_unregister. We add our own reference to it here, so we
|
|
* can perform cleanup (in _remove()) without it being freed before
|
|
* we're ready.
|
|
*/
|
|
get_device(&aspeed->master.dev);
|
|
return 0;
|
|
|
|
err_release:
|
|
clk_disable_unprepare(aspeed->clk);
|
|
return rc;
|
|
}
|
|
|
|
static int fsi_master_aspeed_remove(struct platform_device *pdev)
|
|
{
|
|
struct fsi_master_aspeed *aspeed = platform_get_drvdata(pdev);
|
|
|
|
fsi_master_unregister(&aspeed->master);
|
|
clk_disable_unprepare(aspeed->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id fsi_master_aspeed_match[] = {
|
|
{ .compatible = "aspeed,ast2600-fsi-master" },
|
|
{ },
|
|
};
|
|
|
|
static struct platform_driver fsi_master_aspeed_driver = {
|
|
.driver = {
|
|
.name = "fsi-master-aspeed",
|
|
.of_match_table = fsi_master_aspeed_match,
|
|
},
|
|
.probe = fsi_master_aspeed_probe,
|
|
.remove = fsi_master_aspeed_remove,
|
|
};
|
|
|
|
module_platform_driver(fsi_master_aspeed_driver);
|
|
MODULE_LICENSE("GPL");
|