forked from Minki/linux
1ee9df499b
'ranges' are specified as <base size> not as <start end> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
166 lines
4.2 KiB
Plaintext
166 lines
4.2 KiB
Plaintext
QorIQ DPAA Queue Manager Device Tree Binding
|
|
|
|
Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
|
|
|
|
CONTENTS
|
|
|
|
- QMan Node
|
|
- QMan Private Memory Nodes
|
|
- Example
|
|
|
|
QMan Node
|
|
|
|
The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
|
|
supports queuing and QoS scheduling of frames to CPUs, network interfaces and
|
|
DPAA logic modules, maintains packet ordering within flows. Besides providing
|
|
flow-level queuing, is also responsible for congestion management functions such
|
|
as RED/WRED, congestion notifications and tail discards. This binding covers the
|
|
CCSR space programming model
|
|
|
|
PROPERTIES
|
|
|
|
- compatible
|
|
Usage: Required
|
|
Value type: <stringlist>
|
|
Definition: Must include "fsl,qman"
|
|
May include "fsl,<SoC>-qman"
|
|
|
|
- reg
|
|
Usage: Required
|
|
Value type: <prop-encoded-array>
|
|
Definition: Registers region within the CCSR address space
|
|
|
|
The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
|
|
are located at offsets 0xbf8 and 0xbfc
|
|
|
|
- interrupts
|
|
Usage: Required
|
|
Value type: <prop-encoded-array>
|
|
Definition: Standard property. The error interrupt
|
|
|
|
- fsl,liodn
|
|
Usage: See pamu.txt
|
|
Value type: <prop-encoded-array>
|
|
Definition: PAMU property used for static LIODN assignment
|
|
|
|
- fsl,iommu-parent
|
|
Usage: See pamu.txt
|
|
Value type: <phandle>
|
|
Definition: PAMU property used for dynamic LIODN assignment
|
|
|
|
For additional details about the PAMU/LIODN binding(s) see pamu.txt
|
|
|
|
- clocks
|
|
Usage: See clock-bindings.txt and qoriq-clock.txt
|
|
Value type: <prop-encoded-array>
|
|
Definition: Reference input clock. Its frequency is half of the
|
|
platform clock
|
|
|
|
Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
|
|
to the respective QMan instance
|
|
|
|
- fsl,qman
|
|
Usage: Required
|
|
Value type: <prop-encoded-array>
|
|
Description: List of phandle and DCP index pairs, to the QMan instance
|
|
to which this device is connected via the DCP
|
|
|
|
QMan Private Memory Nodes
|
|
|
|
QMan requires two contiguous range of physical memory used for the backing store
|
|
for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
|
|
This memory is reserved/allocated as a nodes under the /reserved-memory node
|
|
|
|
The QMan FQD memory node must be named "qman-fqd"
|
|
|
|
PROPERTIES
|
|
|
|
- compatible
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: Must inclide "fsl,qman-fqd"
|
|
|
|
The QMan PFDR memory node must be named "qman-pfdr"
|
|
|
|
PROPERTIES
|
|
|
|
- compatible
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: Must inclide "fsl,qman-pfdr"
|
|
|
|
The following constraints are relevant to the FQD and PFDR private memory:
|
|
- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
|
|
1 GiB
|
|
- The alignment must be a muliptle of the memory size
|
|
|
|
The size of the FQD and PFDP must be chosen by observing the hardware features
|
|
configured via the Reset Configuration Word (RCW) and that are relevant to a
|
|
specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
|
|
FMan ports, etc.). The size configured in the DT must reflect the hardware
|
|
capabilities and not the specific needs of an application
|
|
|
|
For additional details about reserved memory regions see reserved-memory.txt
|
|
|
|
EXAMPLE
|
|
|
|
The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
qman_fqd: qman-fqd {
|
|
compatible = "fsl,qman-fqd";
|
|
alloc-ranges = <0 0 0x10 0>;
|
|
size = <0 0x400000>;
|
|
alignment = <0 0x400000>;
|
|
};
|
|
qman_pfdr: qman-pfdr {
|
|
compatible = "fsl,qman-pfdr";
|
|
alloc-ranges = <0 0 0x10 0>;
|
|
size = <0 0x2000000>;
|
|
alignment = <0 0x2000000>;
|
|
};
|
|
};
|
|
|
|
The example below shows a (P4080) QMan CCSR-space node
|
|
|
|
clockgen: global-utilities@e1000 {
|
|
...
|
|
sysclk: sysclk {
|
|
...
|
|
};
|
|
...
|
|
platform_pll: platform-pll@c00 {
|
|
#clock-cells = <1>;
|
|
reg = <0xc00 0x4>;
|
|
compatible = "fsl,qoriq-platform-pll-1.0";
|
|
clocks = <&sysclk>;
|
|
clock-output-names = "platform-pll", "platform-pll-div2";
|
|
};
|
|
...
|
|
};
|
|
|
|
crypto@300000 {
|
|
...
|
|
fsl,qman = <&qman, 2>;
|
|
...
|
|
};
|
|
|
|
qman: qman@318000 {
|
|
compatible = "fsl,qman";
|
|
reg = <0x318000 0x1000>;
|
|
interrupts = <16 2 1 3>
|
|
fsl,liodn = <0x16>;
|
|
memory-region = <&qman_fqd &qman_pfdr>;
|
|
clocks = <&platform_pll 1>;
|
|
};
|
|
|
|
fman@400000 {
|
|
...
|
|
fsl,qman = <&qman, 0>;
|
|
...
|
|
};
|