linux/arch/arm/boot/dts/exynos5440.dtsi
Olof Johansson 1e76c7cb3c update exynos DT for
- usb3phy and dwc3 for exynos5250
 - keypad for exynos4412
 - TMU clock for exynos4210
 - MFC clock for exynos4
 - DP controller for exynos5250
 - G2D clock for exynos4
 - some exynos boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRt401AAoJEA0Cl+kVi2xqRzIP/3Ln477F6wWWsFM3WHEeSNdo
 +reRq+cy4MC4se29RSCvlaAvhrCHwmfULG4O6x9om4IRMTWLFiASPhMSFons2PyV
 kghh8mhfZgbsF2U/xdh71xvgLfm3qyf7kmaYzkIs2llBvZYiEc9SbD+YNvc+V/gT
 rDcvvfrFwZPvlTiSnx+1tpNEHZ5zIbaInzLsJaoarBfOtK0A8vZzgZj88f98zILE
 hDZqZg7CNCECo8MNVJLHEi3Djq7nt9M748KKG1f2brRSu+3yo2aK9YelXeK2AzZT
 Mf0IcO8o/TwPVaHy8xD2GRE1Yr6QjY7yxvmYdNptoccxoQ6pNBG+2Ki9KpxBi3wL
 VTi5NMVqMzzH2hpCtUu2yDKqF3oUUYlVHytiYsIAx9T2eGMukNcfyfoFCScvRZy+
 XeQjc2hYr/74FdpXMypIVRzIDdlBEJfMbj1Pu03TzXz+9UsteRdmFfCe1rTczNHT
 +LRfoIiTTeN9YSZnwCKrhjCk/DJUZYIE8EofXGI95yAM4Ssk/cZuwqPC907LhtD1
 PEypWiVzhrk/tHadEyS3ybA0jr5pwO7RDw6Bix1CTixAq7bKBx1XEBJXXGnqdYog
 K39dAiu4CEZf11RWaEYPfhWLPJwnltrDulygDTvxXKCkp/0StmWlt0HIogYdj9mw
 O5d1HaA/zOOMSQHyB7FR
 =L7JN
 -----END PGP SIGNATURE-----

Merge tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

From Kukjin Kim:
Update exynos DT for
- usb3phy and dwc3 for exynos5250
- keypad for exynos4412
- TMU clock for exynos4210
- MFC clock for exynos4
- DP controller for exynos5250
- G2D clock for exynos4
- some exynos boards

* tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (456 commits)
  ARM: dts: add ohci and ehci controller nodes for EXYNOS5440
  ARM: dts: Update G2D documentation for clock entries
  ARM: dts: Add clock entries to G2D node for exynos4x12
  ARM: dts: Add clock entries to G2D node for exynos4210
  ARM: dts: Remove duplicate and add missing G2D nodes
  clk: exynos4: Add additional G2D clocks
  ARM: dts: Document DP clock in samsung,exynos5-dp binding
  ARM: dts: add pin state information for DP HPD support to Exynos5250
  ARM: dts: add dts node for the ahci sata exynos5440
  ARM: dts: add vmmc regulator support for ODROID-X
  ARM: dts: add max77686 node entry for ODROID-X
  ARM: dts: Enable RTC by default on EXYNOS5440
  ARM: dts: Add display timing node to exynos5250-arndale.dts
  ARM: dts: Add clock provider information for DP controller in Exynos5250 SoC
  ARM: dts: Add DT node for DP controller for Arndale Board
  ARM: dts: Remove combiner IRQ node from exynos4x12.dtsi
  ARM: dts: add max8997 device node for exynos4210-origen board
  ARM: dts: Enable TMU on Origen4210 board
  ARM: dts: Add TMU clock entries to exynos4210.dtsi
  ARM: dts: Update MFC documentation for clock entries
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-12 16:27:21 -07:00

247 lines
5.0 KiB
Plaintext

/*
* SAMSUNG EXYNOS5440 SoC device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "samsung,exynos5440";
interrupt-parent = <&gic>;
clock: clock-controller@0x160000 {
compatible = "samsung,exynos5440-clock";
reg = <0x160000 0x1000>;
#clock-cells = <1>;
};
gic:interrupt-controller@2E0000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x2E1000 0x1000>,
<0x2E2000 0x1000>,
<0x2E4000 0x2000>,
<0x2E6000 0x2000>;
interrupts = <1 9 0xf04>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <3>;
};
};
arm-pmu {
compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
interrupts = <0 52 4>,
<0 53 4>,
<0 54 4>,
<0 55 4>;
};
timer {
compatible = "arm,cortex-a15-timer",
"arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
clock-frequency = <50000000>;
};
cpufreq@160000 {
compatible = "samsung,exynos5440-cpufreq";
reg = <0x160000 0x1000>;
interrupts = <0 57 0>;
operating-points = <
/* KHz uV */
1200000 1025000
1000000 975000
800000 925000
>;
};
serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
clocks = <&clock 21>, <&clock 21>;
clock-names = "uart", "clk_uart_baud0";
};
serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
clocks = <&clock 21>, <&clock 21>;
clock-names = "uart", "clk_uart_baud0";
};
spi {
compatible = "samsung,exynos4210-spi";
reg = <0xD0000 0x1000>;
interrupts = <0 4 0>;
tx-dma-channel = <&pdma0 5>; /* preliminary */
rx-dma-channel = <&pdma0 4>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 21>, <&clock 16>;
clock-names = "spi", "spi_busclk0";
};
pinctrl {
compatible = "samsung,exynos5440-pinctrl";
reg = <0xE0000 0x1000>;
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
<0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-cells = <2>;
fan: fan {
samsung,exynos5440-pin-function = <1>;
};
hdd_led0: hdd_led0 {
samsung,exynos5440-pin-function = <2>;
};
hdd_led1: hdd_led1 {
samsung,exynos5440-pin-function = <3>;
};
uart1: uart1 {
samsung,exynos5440-pin-function = <4>;
};
};
i2c@F0000 {
compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
interrupts = <0 5 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 21>;
clock-names = "i2c";
};
i2c@100000 {
compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
interrupts = <0 6 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 21>;
clock-names = "i2c";
};
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
interrupts = <0 1 0>;
clocks = <&clock 21>;
clock-names = "watchdog";
};
gmac: ethernet@00230000 {
compatible = "snps,dwmac-3.70a";
reg = <0x00230000 0x8000>;
interrupt-parent = <&gic>;
interrupts = <0 31 4>;
interrupt-names = "macirq";
phy-mode = "sgmii";
clocks = <&clock 25>;
clock-names = "stmmaceth";
};
amba {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,amba-bus";
interrupt-parent = <&gic>;
ranges;
pdma0: pdma@00121000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 46 0>;
clocks = <&clock 8>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
pdma1: pdma@00120000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 47 0>;
clocks = <&clock 8>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
};
rtc {
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
interrupts = <0 17 0>, <0 16 0>;
clocks = <&clock 21>;
clock-names = "rtc";
};
sata@210000 {
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
interrupts = <0 30 0>;
clocks = <&clock 23>;
clock-names = "sata";
};
ohci@220000 {
compatible = "samsung,exynos5440-ohci";
reg = <0x220000 0x1000>;
interrupts = <0 29 0>;
clocks = <&clock 24>;
clock-names = "usbhost";
};
ehci@221000 {
compatible = "samsung,exynos5440-ehci";
reg = <0x221000 0x1000>;
interrupts = <0 29 0>;
clocks = <&clock 24>;
clock-names = "usbhost";
};
};