linux/sound/soc/intel/boards/bdw-rt5650.c
Cezary Rojewski 4cc62da459
ASoC: Intel: bdw-rt5650: Mark FE DAIs as nonatomic
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-05 18:18:41 +01:00

332 lines
8.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* ASoC machine driver for Intel Broadwell platforms with RT5650 codec
*
* Copyright 2019, The Chromium OS Authors. All rights reserved.
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-acpi.h>
#include "../../codecs/rt5645.h"
struct bdw_rt5650_priv {
struct gpio_desc *gpio_hp_en;
struct snd_soc_component *component;
};
static const struct snd_soc_dapm_widget bdw_rt5650_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_SPK("Speaker", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("DMIC Pair1", NULL),
SND_SOC_DAPM_MIC("DMIC Pair2", NULL),
};
static const struct snd_soc_dapm_route bdw_rt5650_map[] = {
/* Speakers */
{"Speaker", NULL, "SPOL"},
{"Speaker", NULL, "SPOR"},
/* Headset jack connectors */
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
{"IN1P", NULL, "Headset Mic"},
{"IN1N", NULL, "Headset Mic"},
/* Digital MICs
* DMIC Pair1 are the two DMICs connected on the DMICN1 connector.
* DMIC Pair2 are the two DMICs connected on the DMICN2 connector.
* Facing the camera, DMIC Pair1 are on the left side, DMIC Pair2
* are on the right side.
*/
{"DMIC L1", NULL, "DMIC Pair1"},
{"DMIC R1", NULL, "DMIC Pair1"},
{"DMIC L2", NULL, "DMIC Pair2"},
{"DMIC R2", NULL, "DMIC Pair2"},
/* CODEC BE connections */
{"SSP0 CODEC IN", NULL, "AIF1 Capture"},
{"AIF1 Playback", NULL, "SSP0 CODEC OUT"},
};
static const struct snd_kcontrol_new bdw_rt5650_controls[] = {
SOC_DAPM_PIN_SWITCH("Speaker"),
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
SOC_DAPM_PIN_SWITCH("DMIC Pair1"),
SOC_DAPM_PIN_SWITCH("DMIC Pair2"),
};
static struct snd_soc_jack headphone_jack;
static struct snd_soc_jack mic_jack;
static struct snd_soc_jack_pin headphone_jack_pin = {
.pin = "Headphone",
.mask = SND_JACK_HEADPHONE,
};
static struct snd_soc_jack_pin mic_jack_pin = {
.pin = "Headset Mic",
.mask = SND_JACK_MICROPHONE,
};
static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params)
{
struct snd_interval *rate = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval *chan = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
/* The ADSP will covert the FE rate to 48k, max 4-channels */
rate->min = rate->max = 48000;
chan->min = 2;
chan->max = 4;
/* set SSP0 to 24 bit */
snd_mask_set_format(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT),
SNDRV_PCM_FORMAT_S24_LE);
return 0;
}
static int bdw_rt5650_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
int ret;
/* Workaround: set codec PLL to 19.2MHz that PLL source is
* from MCLK(24MHz) to conform 2.4MHz DMIC clock.
*/
ret = snd_soc_dai_set_pll(codec_dai, 0, RT5645_PLL1_S_MCLK,
24000000, 19200000);
if (ret < 0) {
dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
return ret;
}
/* The actual MCLK freq is 24MHz. The codec is told that MCLK is
* 24.576MHz to satisfy the requirement of rl6231_get_clk_info.
* ASRC is enabled on AD and DA filters to ensure good audio quality.
*/
ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_PLL1, 24576000,
SND_SOC_CLOCK_IN);
if (ret < 0) {
dev_err(rtd->dev, "can't set codec sysclk configuration\n");
return ret;
}
return ret;
}
static struct snd_soc_ops bdw_rt5650_ops = {
.hw_params = bdw_rt5650_hw_params,
};
static const unsigned int channels[] = {
2, 4,
};
static const struct snd_pcm_hw_constraint_list constraints_channels = {
.count = ARRAY_SIZE(channels),
.list = channels,
.mask = 0,
};
static int bdw_rt5650_fe_startup(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
/* Board supports stereo and quad configurations for capture */
if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
return 0;
runtime->hw.channels_max = 4;
return snd_pcm_hw_constraint_list(runtime, 0,
SNDRV_PCM_HW_PARAM_CHANNELS,
&constraints_channels);
}
static const struct snd_soc_ops bdw_rt5650_fe_ops = {
.startup = bdw_rt5650_fe_startup,
};
static int bdw_rt5650_init(struct snd_soc_pcm_runtime *rtd)
{
struct bdw_rt5650_priv *bdw_rt5650 =
snd_soc_card_get_drvdata(rtd->card);
struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
struct snd_soc_component *component = codec_dai->component;
int ret;
/* Enable codec ASRC function for Stereo DAC/Stereo1 ADC/DMIC/I2S1.
* The ASRC clock source is clk_i2s1_asrc.
*/
rt5645_sel_asrc_clk_src(component,
RT5645_DA_STEREO_FILTER |
RT5645_DA_MONO_L_FILTER |
RT5645_DA_MONO_R_FILTER |
RT5645_AD_STEREO_FILTER |
RT5645_AD_MONO_L_FILTER |
RT5645_AD_MONO_R_FILTER,
RT5645_CLK_SEL_I2S1_ASRC);
/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24);
if (ret < 0) {
dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
return ret;
}
/* Create and initialize headphone jack */
if (snd_soc_card_jack_new(rtd->card, "Headphone Jack",
SND_JACK_HEADPHONE, &headphone_jack,
&headphone_jack_pin, 1)) {
dev_err(component->dev, "Can't create headphone jack\n");
}
/* Create and initialize mic jack */
if (snd_soc_card_jack_new(rtd->card, "Mic Jack", SND_JACK_MICROPHONE,
&mic_jack, &mic_jack_pin, 1)) {
dev_err(component->dev, "Can't create mic jack\n");
}
rt5645_set_jack_detect(component, &headphone_jack, &mic_jack, NULL);
bdw_rt5650->component = component;
return 0;
}
/* broadwell digital audio interface glue - connects codec <--> CPU */
SND_SOC_DAILINK_DEF(dummy,
DAILINK_COMP_ARRAY(COMP_DUMMY()));
SND_SOC_DAILINK_DEF(fe,
DAILINK_COMP_ARRAY(COMP_CPU("System Pin")));
SND_SOC_DAILINK_DEF(platform,
DAILINK_COMP_ARRAY(COMP_PLATFORM("haswell-pcm-audio")));
SND_SOC_DAILINK_DEF(be,
DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5650:00", "rt5645-aif1")));
SND_SOC_DAILINK_DEF(ssp0_port,
DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
static struct snd_soc_dai_link bdw_rt5650_dais[] = {
/* Front End DAI links */
{
.name = "System PCM",
.stream_name = "System Playback",
.nonatomic = 1,
.dynamic = 1,
.ops = &bdw_rt5650_fe_ops,
.trigger = {
SND_SOC_DPCM_TRIGGER_POST,
SND_SOC_DPCM_TRIGGER_POST
},
.dpcm_playback = 1,
.dpcm_capture = 1,
SND_SOC_DAILINK_REG(fe, dummy, platform),
},
/* Back End DAI links */
{
/* SSP0 - Codec */
.name = "Codec",
.id = 0,
.no_pcm = 1,
.dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ignore_pmdown_time = 1,
.be_hw_params_fixup = broadwell_ssp0_fixup,
.ops = &bdw_rt5650_ops,
.dpcm_playback = 1,
.dpcm_capture = 1,
.init = bdw_rt5650_init,
SND_SOC_DAILINK_REG(ssp0_port, be, platform),
},
};
#if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
/* use space before codec name to simplify card ID, and simplify driver name */
#define CARD_NAME "bdw rt5650" /* card name will be 'sof-bdw rt5650' */
#define DRIVER_NAME "SOF"
#else
#define CARD_NAME "bdw-rt5650"
#define DRIVER_NAME NULL /* card name will be used for driver name */
#endif
/* ASoC machine driver for Broadwell DSP + RT5650 */
static struct snd_soc_card bdw_rt5650_card = {
.name = CARD_NAME,
.driver_name = DRIVER_NAME,
.owner = THIS_MODULE,
.dai_link = bdw_rt5650_dais,
.num_links = ARRAY_SIZE(bdw_rt5650_dais),
.dapm_widgets = bdw_rt5650_widgets,
.num_dapm_widgets = ARRAY_SIZE(bdw_rt5650_widgets),
.dapm_routes = bdw_rt5650_map,
.num_dapm_routes = ARRAY_SIZE(bdw_rt5650_map),
.controls = bdw_rt5650_controls,
.num_controls = ARRAY_SIZE(bdw_rt5650_controls),
.fully_routed = true,
};
static int bdw_rt5650_probe(struct platform_device *pdev)
{
struct bdw_rt5650_priv *bdw_rt5650;
struct snd_soc_acpi_mach *mach;
int ret;
bdw_rt5650_card.dev = &pdev->dev;
/* Allocate driver private struct */
bdw_rt5650 = devm_kzalloc(&pdev->dev, sizeof(struct bdw_rt5650_priv),
GFP_KERNEL);
if (!bdw_rt5650)
return -ENOMEM;
/* override plaform name, if required */
mach = pdev->dev.platform_data;
ret = snd_soc_fixup_dai_links_platform_name(&bdw_rt5650_card,
mach->mach_params.platform);
if (ret)
return ret;
snd_soc_card_set_drvdata(&bdw_rt5650_card, bdw_rt5650);
return devm_snd_soc_register_card(&pdev->dev, &bdw_rt5650_card);
}
static struct platform_driver bdw_rt5650_audio = {
.probe = bdw_rt5650_probe,
.driver = {
.name = "bdw-rt5650",
.pm = &snd_soc_pm_ops,
},
};
module_platform_driver(bdw_rt5650_audio)
/* Module information */
MODULE_AUTHOR("Ben Zhang <benzh@chromium.org>");
MODULE_DESCRIPTION("Intel Broadwell RT5650 machine driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:bdw-rt5650");