Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
153 lines
4.6 KiB
C
153 lines
4.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* This code is used on x86_64 to create page table identity mappings on
|
|
* demand by building up a new set of page tables (or appending to the
|
|
* existing ones), and then switching over to them when ready.
|
|
*
|
|
* Copyright (C) 2015-2016 Yinghai Lu
|
|
* Copyright (C) 2016 Kees Cook
|
|
*/
|
|
|
|
/*
|
|
* Since we're dealing with identity mappings, physical and virtual
|
|
* addresses are the same, so override these defines which are ultimately
|
|
* used by the headers in misc.h.
|
|
*/
|
|
#define __pa(x) ((unsigned long)(x))
|
|
#define __va(x) ((void *)((unsigned long)(x)))
|
|
|
|
/*
|
|
* The pgtable.h and mm/ident_map.c includes make use of the SME related
|
|
* information which is not used in the compressed image support. Un-define
|
|
* the SME support to avoid any compile and link errors.
|
|
*/
|
|
#undef CONFIG_AMD_MEM_ENCRYPT
|
|
|
|
#include "misc.h"
|
|
|
|
/* These actually do the work of building the kernel identity maps. */
|
|
#include <asm/init.h>
|
|
#include <asm/pgtable.h>
|
|
/* Use the static base for this part of the boot process */
|
|
#undef __PAGE_OFFSET
|
|
#define __PAGE_OFFSET __PAGE_OFFSET_BASE
|
|
#include "../../mm/ident_map.c"
|
|
|
|
/* Used by pgtable.h asm code to force instruction serialization. */
|
|
unsigned long __force_order;
|
|
|
|
/* Used to track our page table allocation area. */
|
|
struct alloc_pgt_data {
|
|
unsigned char *pgt_buf;
|
|
unsigned long pgt_buf_size;
|
|
unsigned long pgt_buf_offset;
|
|
};
|
|
|
|
/*
|
|
* Allocates space for a page table entry, using struct alloc_pgt_data
|
|
* above. Besides the local callers, this is used as the allocation
|
|
* callback in mapping_info below.
|
|
*/
|
|
static void *alloc_pgt_page(void *context)
|
|
{
|
|
struct alloc_pgt_data *pages = (struct alloc_pgt_data *)context;
|
|
unsigned char *entry;
|
|
|
|
/* Validate there is space available for a new page. */
|
|
if (pages->pgt_buf_offset >= pages->pgt_buf_size) {
|
|
debug_putstr("out of pgt_buf in " __FILE__ "!?\n");
|
|
debug_putaddr(pages->pgt_buf_offset);
|
|
debug_putaddr(pages->pgt_buf_size);
|
|
return NULL;
|
|
}
|
|
|
|
entry = pages->pgt_buf + pages->pgt_buf_offset;
|
|
pages->pgt_buf_offset += PAGE_SIZE;
|
|
|
|
return entry;
|
|
}
|
|
|
|
/* Used to track our allocated page tables. */
|
|
static struct alloc_pgt_data pgt_data;
|
|
|
|
/* The top level page table entry pointer. */
|
|
static unsigned long top_level_pgt;
|
|
|
|
/*
|
|
* Mapping information structure passed to kernel_ident_mapping_init().
|
|
* Due to relocation, pointers must be assigned at run time not build time.
|
|
*/
|
|
static struct x86_mapping_info mapping_info = {
|
|
.page_flag = __PAGE_KERNEL_LARGE_EXEC,
|
|
};
|
|
|
|
/* Locates and clears a region for a new top level page table. */
|
|
void initialize_identity_maps(void)
|
|
{
|
|
/* Init mapping_info with run-time function/buffer pointers. */
|
|
mapping_info.alloc_pgt_page = alloc_pgt_page;
|
|
mapping_info.context = &pgt_data;
|
|
|
|
/*
|
|
* It should be impossible for this not to already be true,
|
|
* but since calling this a second time would rewind the other
|
|
* counters, let's just make sure this is reset too.
|
|
*/
|
|
pgt_data.pgt_buf_offset = 0;
|
|
|
|
/*
|
|
* If we came here via startup_32(), cr3 will be _pgtable already
|
|
* and we must append to the existing area instead of entirely
|
|
* overwriting it.
|
|
*
|
|
* With 5-level paging, we use '_pgtable' to allocate the p4d page table,
|
|
* the top-level page table is allocated separately.
|
|
*
|
|
* p4d_offset(top_level_pgt, 0) would cover both the 4- and 5-level
|
|
* cases. On 4-level paging it's equal to 'top_level_pgt'.
|
|
*/
|
|
top_level_pgt = read_cr3_pa();
|
|
if (p4d_offset((pgd_t *)top_level_pgt, 0) == (p4d_t *)_pgtable) {
|
|
debug_putstr("booted via startup_32()\n");
|
|
pgt_data.pgt_buf = _pgtable + BOOT_INIT_PGT_SIZE;
|
|
pgt_data.pgt_buf_size = BOOT_PGT_SIZE - BOOT_INIT_PGT_SIZE;
|
|
memset(pgt_data.pgt_buf, 0, pgt_data.pgt_buf_size);
|
|
} else {
|
|
debug_putstr("booted via startup_64()\n");
|
|
pgt_data.pgt_buf = _pgtable;
|
|
pgt_data.pgt_buf_size = BOOT_PGT_SIZE;
|
|
memset(pgt_data.pgt_buf, 0, pgt_data.pgt_buf_size);
|
|
top_level_pgt = (unsigned long)alloc_pgt_page(&pgt_data);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Adds the specified range to what will become the new identity mappings.
|
|
* Once all ranges have been added, the new mapping is activated by calling
|
|
* finalize_identity_maps() below.
|
|
*/
|
|
void add_identity_map(unsigned long start, unsigned long size)
|
|
{
|
|
unsigned long end = start + size;
|
|
|
|
/* Align boundary to 2M. */
|
|
start = round_down(start, PMD_SIZE);
|
|
end = round_up(end, PMD_SIZE);
|
|
if (start >= end)
|
|
return;
|
|
|
|
/* Build the mapping. */
|
|
kernel_ident_mapping_init(&mapping_info, (pgd_t *)top_level_pgt,
|
|
start, end);
|
|
}
|
|
|
|
/*
|
|
* This switches the page tables to the new level4 that has been built
|
|
* via calls to add_identity_map() above. If booted via startup_32(),
|
|
* this is effectively a no-op.
|
|
*/
|
|
void finalize_identity_maps(void)
|
|
{
|
|
write_cr3(top_level_pgt);
|
|
}
|