linux/drivers/infiniband/hw/mthca/mthca_reset.c
Tim Schmielau 4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00

234 lines
5.9 KiB
C

/*
* Copyright (c) 2004 Topspin Communications. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* $Id: mthca_reset.c 1349 2004-12-16 21:09:43Z roland $
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include "mthca_dev.h"
#include "mthca_cmd.h"
int mthca_reset(struct mthca_dev *mdev)
{
int i;
int err = 0;
u32 *hca_header = NULL;
u32 *bridge_header = NULL;
struct pci_dev *bridge = NULL;
#define MTHCA_RESET_OFFSET 0xf0010
#define MTHCA_RESET_VALUE swab32(1)
/*
* Reset the chip. This is somewhat ugly because we have to
* save off the PCI header before reset and then restore it
* after the chip reboots. We skip config space offsets 22
* and 23 since those have a special meaning.
*
* To make matters worse, for Tavor (PCI-X HCA) we have to
* find the associated bridge device and save off its PCI
* header as well.
*/
if (!(mdev->mthca_flags & MTHCA_FLAG_PCIE)) {
/* Look for the bridge -- its device ID will be 2 more
than HCA's device ID. */
while ((bridge = pci_get_device(mdev->pdev->vendor,
mdev->pdev->device + 2,
bridge)) != NULL) {
if (bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
bridge->subordinate == mdev->pdev->bus) {
mthca_dbg(mdev, "Found bridge: %s\n",
pci_name(bridge));
break;
}
}
if (!bridge) {
/*
* Didn't find a bridge for a Tavor device --
* assume we're in no-bridge mode and hope for
* the best.
*/
mthca_warn(mdev, "No bridge found for %s\n",
pci_name(mdev->pdev));
}
}
/* For Arbel do we need to save off the full 4K PCI Express header?? */
hca_header = kmalloc(256, GFP_KERNEL);
if (!hca_header) {
err = -ENOMEM;
mthca_err(mdev, "Couldn't allocate memory to save HCA "
"PCI header, aborting.\n");
goto out;
}
for (i = 0; i < 64; ++i) {
if (i == 22 || i == 23)
continue;
if (pci_read_config_dword(mdev->pdev, i * 4, hca_header + i)) {
err = -ENODEV;
mthca_err(mdev, "Couldn't save HCA "
"PCI header, aborting.\n");
goto out;
}
}
if (bridge) {
bridge_header = kmalloc(256, GFP_KERNEL);
if (!bridge_header) {
err = -ENOMEM;
mthca_err(mdev, "Couldn't allocate memory to save HCA "
"bridge PCI header, aborting.\n");
goto out;
}
for (i = 0; i < 64; ++i) {
if (i == 22 || i == 23)
continue;
if (pci_read_config_dword(bridge, i * 4, bridge_header + i)) {
err = -ENODEV;
mthca_err(mdev, "Couldn't save HCA bridge "
"PCI header, aborting.\n");
goto out;
}
}
}
/* actually hit reset */
{
void __iomem *reset = ioremap(pci_resource_start(mdev->pdev, 0) +
MTHCA_RESET_OFFSET, 4);
if (!reset) {
err = -ENOMEM;
mthca_err(mdev, "Couldn't map HCA reset register, "
"aborting.\n");
goto out;
}
writel(MTHCA_RESET_VALUE, reset);
iounmap(reset);
}
/* Docs say to wait one second before accessing device */
msleep(1000);
/* Now wait for PCI device to start responding again */
{
u32 v;
int c = 0;
for (c = 0; c < 100; ++c) {
if (pci_read_config_dword(bridge ? bridge : mdev->pdev, 0, &v)) {
err = -ENODEV;
mthca_err(mdev, "Couldn't access HCA after reset, "
"aborting.\n");
goto out;
}
if (v != 0xffffffff)
goto good;
msleep(100);
}
err = -ENODEV;
mthca_err(mdev, "PCI device did not come back after reset, "
"aborting.\n");
goto out;
}
good:
/* Now restore the PCI headers */
if (bridge) {
/*
* Bridge control register is at 0x3e, so we'll
* naturally restore it last in this loop.
*/
for (i = 0; i < 16; ++i) {
if (i * 4 == PCI_COMMAND)
continue;
if (pci_write_config_dword(bridge, i * 4, bridge_header[i])) {
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA bridge reg %x, "
"aborting.\n", i);
goto out;
}
}
if (pci_write_config_dword(bridge, PCI_COMMAND,
bridge_header[PCI_COMMAND / 4])) {
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA bridge COMMAND, "
"aborting.\n");
goto out;
}
}
for (i = 0; i < 16; ++i) {
if (i * 4 == PCI_COMMAND)
continue;
if (pci_write_config_dword(mdev->pdev, i * 4, hca_header[i])) {
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA reg %x, "
"aborting.\n", i);
goto out;
}
}
if (pci_write_config_dword(mdev->pdev, PCI_COMMAND,
hca_header[PCI_COMMAND / 4])) {
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA COMMAND, "
"aborting.\n");
goto out;
}
out:
if (bridge)
pci_dev_put(bridge);
kfree(bridge_header);
kfree(hca_header);
return err;
}