linux/arch/x86/kernel/cpu/addon_cpuid_features.c
James Bottomley 017d9d20d8 x86: use CONFIG_X86_SMP instead of CONFIG_SMP
Impact: fix x86/Voyager boot

CONFIG_SMP is used for features which work on *all* x86 boxes.
CONFIG_X86_SMP is used for standard PC like x86 boxes (for things like
multi core and apics)

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30 22:53:10 +01:00

172 lines
4.0 KiB
C

/*
* Routines to indentify additional cpu features that are scattered in
* cpuid space.
*/
#include <linux/cpu.h>
#include <asm/pat.h>
#include <asm/processor.h>
#include <mach_apic.h>
struct cpuid_bit {
u16 feature;
u8 reg;
u8 bit;
u32 level;
};
enum cpuid_regs {
CR_EAX = 0,
CR_ECX,
CR_EDX,
CR_EBX
};
void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
{
u32 max_level;
u32 regs[4];
const struct cpuid_bit *cb;
static const struct cpuid_bit cpuid_bits[] = {
{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 },
{ 0, 0, 0, 0 }
};
for (cb = cpuid_bits; cb->feature; cb++) {
/* Verify that the level is valid */
max_level = cpuid_eax(cb->level & 0xffff0000);
if (max_level < cb->level ||
max_level > (cb->level | 0xffff))
continue;
cpuid(cb->level, &regs[CR_EAX], &regs[CR_EBX],
&regs[CR_ECX], &regs[CR_EDX]);
if (regs[cb->reg] & (1 << cb->bit))
set_cpu_cap(c, cb->feature);
}
}
/* leaf 0xb SMT level */
#define SMT_LEVEL 0
/* leaf 0xb sub-leaf types */
#define INVALID_TYPE 0
#define SMT_TYPE 1
#define CORE_TYPE 2
#define LEAFB_SUBTYPE(ecx) (((ecx) >> 8) & 0xff)
#define BITS_SHIFT_NEXT_LEVEL(eax) ((eax) & 0x1f)
#define LEVEL_MAX_SIBLINGS(ebx) ((ebx) & 0xffff)
/*
* Check for extended topology enumeration cpuid leaf 0xb and if it
* exists, use it for populating initial_apicid and cpu topology
* detection.
*/
void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_X86_SMP
unsigned int eax, ebx, ecx, edx, sub_index;
unsigned int ht_mask_width, core_plus_mask_width;
unsigned int core_select_mask, core_level_siblings;
if (c->cpuid_level < 0xb)
return;
cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx);
/*
* check if the cpuid leaf 0xb is actually implemented.
*/
if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE))
return;
set_cpu_cap(c, X86_FEATURE_XTOPOLOGY);
/*
* initial apic id, which also represents 32-bit extended x2apic id.
*/
c->initial_apicid = edx;
/*
* Populate HT related information from sub-leaf level 0.
*/
core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx);
core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
sub_index = 1;
do {
cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx);
/*
* Check for the Core type in the implemented sub leaves.
*/
if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) {
core_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
break;
}
sub_index++;
} while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE);
core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width;
#ifdef CONFIG_X86_32
c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width)
& core_select_mask;
c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width);
#else
c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask;
c->phys_proc_id = phys_pkg_id(core_plus_mask_width);
#endif
c->x86_max_cores = (core_level_siblings / smp_num_siblings);
printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
c->phys_proc_id);
if (c->x86_max_cores > 1)
printk(KERN_INFO "CPU: Processor Core ID: %d\n",
c->cpu_core_id);
return;
#endif
}
#ifdef CONFIG_X86_PAT
void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
{
if (!cpu_has_pat)
pat_disable("PAT not supported by CPU.");
switch (c->x86_vendor) {
case X86_VENDOR_INTEL:
/*
* There is a known erratum on Pentium III and Core Solo
* and Core Duo CPUs.
* " Page with PAT set to WC while associated MTRR is UC
* may consolidate to UC "
* Because of this erratum, it is better to stick with
* setting WC in MTRR rather than using PAT on these CPUs.
*
* Enable PAT WC only on P4, Core 2 or later CPUs.
*/
if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15))
return;
pat_disable("PAT WC disabled due to known CPU erratum.");
return;
case X86_VENDOR_AMD:
case X86_VENDOR_CENTAUR:
case X86_VENDOR_TRANSMETA:
return;
}
pat_disable("PAT disabled. Not yet verified on this CPU type.");
}
#endif