linux/drivers/net/wireless/ti/wlcore/scan.c
Eyal Shapira 5d3a160365 wlcore: increase scan dwell times if no activity
There's a limit on scan dwell times of max 30ms in order
to avoid degrading voip traffic which could be going on
while scanning. However these dwell times increase the
chance of missing out on nearby APs leading to partial
scan results. Allow configuration of longer dwell times
in case there no active interface (i.e. no STA associated
or AP up).

[Arik - count started vifs using an in-driver function]

[Fixed some new checkpatch warnings regarding comments in the
networking subsystem. -- Luca]

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 10:25:39 +02:00

469 lines
12 KiB
C

/*
* This file is part of wl1271
*
* Copyright (C) 2009-2010 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/ieee80211.h>
#include "wlcore.h"
#include "debug.h"
#include "cmd.h"
#include "scan.h"
#include "acx.h"
#include "ps.h"
#include "tx.h"
void wl1271_scan_complete_work(struct work_struct *work)
{
struct delayed_work *dwork;
struct wl1271 *wl;
struct wl12xx_vif *wlvif;
int ret;
dwork = container_of(work, struct delayed_work, work);
wl = container_of(dwork, struct wl1271, scan_complete_work);
wl1271_debug(DEBUG_SCAN, "Scanning complete");
mutex_lock(&wl->mutex);
if (unlikely(wl->state != WLCORE_STATE_ON))
goto out;
if (wl->scan.state == WL1271_SCAN_STATE_IDLE)
goto out;
wlvif = wl->scan_wlvif;
/*
* Rearm the tx watchdog just before idling scan. This
* prevents just-finished scans from triggering the watchdog
*/
wl12xx_rearm_tx_watchdog_locked(wl);
wl->scan.state = WL1271_SCAN_STATE_IDLE;
memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
wl->scan.req = NULL;
wl->scan_wlvif = NULL;
ret = wl1271_ps_elp_wakeup(wl);
if (ret < 0)
goto out;
if (test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) {
/* restore hardware connection monitoring template */
wl1271_cmd_build_ap_probe_req(wl, wlvif, wlvif->probereq);
}
wl1271_ps_elp_sleep(wl);
if (wl->scan.failed) {
wl1271_info("Scan completed due to error.");
wl12xx_queue_recovery_work(wl);
}
wlcore_cmd_regdomain_config_locked(wl);
ieee80211_scan_completed(wl->hw, false);
out:
mutex_unlock(&wl->mutex);
}
static void wlcore_started_vifs_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
int *count = (int *)data;
if (!vif->bss_conf.idle)
(*count)++;
}
static int wlcore_count_started_vifs(struct wl1271 *wl)
{
int count = 0;
ieee80211_iterate_active_interfaces_atomic(wl->hw,
IEEE80211_IFACE_ITER_RESUME_ALL,
wlcore_started_vifs_iter, &count);
return count;
}
static int
wlcore_scan_get_channels(struct wl1271 *wl,
struct ieee80211_channel *req_channels[],
u32 n_channels,
u32 n_ssids,
struct conn_scan_ch_params *channels,
u32 band, bool radar, bool passive,
int start, int max_channels,
u8 *n_pactive_ch,
int scan_type)
{
int i, j;
u32 flags;
bool force_passive = !n_ssids;
u32 min_dwell_time_active, max_dwell_time_active;
u32 dwell_time_passive, dwell_time_dfs;
/* configure dwell times according to scan type */
if (scan_type == SCAN_TYPE_SEARCH) {
struct conf_scan_settings *c = &wl->conf.scan;
bool active_vif_exists = !!wlcore_count_started_vifs(wl);
min_dwell_time_active = active_vif_exists ?
c->min_dwell_time_active :
c->min_dwell_time_active_long;
max_dwell_time_active = active_vif_exists ?
c->max_dwell_time_active :
c->max_dwell_time_active_long;
dwell_time_passive = c->dwell_time_passive;
dwell_time_dfs = c->dwell_time_dfs;
} else {
struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
u32 delta_per_probe;
if (band == IEEE80211_BAND_5GHZ)
delta_per_probe = c->dwell_time_delta_per_probe_5;
else
delta_per_probe = c->dwell_time_delta_per_probe;
min_dwell_time_active = c->base_dwell_time +
n_ssids * c->num_probe_reqs * delta_per_probe;
max_dwell_time_active = min_dwell_time_active +
c->max_dwell_time_delta;
dwell_time_passive = c->dwell_time_passive;
dwell_time_dfs = c->dwell_time_dfs;
}
min_dwell_time_active = DIV_ROUND_UP(min_dwell_time_active, 1000);
max_dwell_time_active = DIV_ROUND_UP(max_dwell_time_active, 1000);
dwell_time_passive = DIV_ROUND_UP(dwell_time_passive, 1000);
dwell_time_dfs = DIV_ROUND_UP(dwell_time_dfs, 1000);
for (i = 0, j = start;
i < n_channels && j < max_channels;
i++) {
flags = req_channels[i]->flags;
if (force_passive)
flags |= IEEE80211_CHAN_PASSIVE_SCAN;
if ((req_channels[i]->band == band) &&
!(flags & IEEE80211_CHAN_DISABLED) &&
(!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
/* if radar is set, we ignore the passive flag */
(radar ||
!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) {
wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
req_channels[i]->band,
req_channels[i]->center_freq);
wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X",
req_channels[i]->hw_value,
req_channels[i]->flags);
wl1271_debug(DEBUG_SCAN, "max_power %d",
req_channels[i]->max_power);
wl1271_debug(DEBUG_SCAN, "min_dwell_time %d max dwell time %d",
min_dwell_time_active,
max_dwell_time_active);
if (flags & IEEE80211_CHAN_RADAR) {
channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
channels[j].passive_duration =
cpu_to_le16(dwell_time_dfs);
} else {
channels[j].passive_duration =
cpu_to_le16(dwell_time_passive);
}
channels[j].min_duration =
cpu_to_le16(min_dwell_time_active);
channels[j].max_duration =
cpu_to_le16(max_dwell_time_active);
channels[j].tx_power_att = req_channels[i]->max_power;
channels[j].channel = req_channels[i]->hw_value;
if (n_pactive_ch &&
(band == IEEE80211_BAND_2GHZ) &&
(channels[j].channel >= 12) &&
(channels[j].channel <= 14) &&
(flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
!force_passive) {
/* pactive channels treated as DFS */
channels[j].flags = SCAN_CHANNEL_FLAGS_DFS;
/*
* n_pactive_ch is counted down from the end of
* the passive channel list
*/
(*n_pactive_ch)++;
wl1271_debug(DEBUG_SCAN, "n_pactive_ch = %d",
*n_pactive_ch);
}
j++;
}
}
return j - start;
}
bool
wlcore_set_scan_chan_params(struct wl1271 *wl,
struct wlcore_scan_channels *cfg,
struct ieee80211_channel *channels[],
u32 n_channels,
u32 n_ssids,
int scan_type)
{
u8 n_pactive_ch = 0;
cfg->passive[0] =
wlcore_scan_get_channels(wl,
channels,
n_channels,
n_ssids,
cfg->channels_2,
IEEE80211_BAND_2GHZ,
false, true, 0,
MAX_CHANNELS_2GHZ,
&n_pactive_ch,
scan_type);
cfg->active[0] =
wlcore_scan_get_channels(wl,
channels,
n_channels,
n_ssids,
cfg->channels_2,
IEEE80211_BAND_2GHZ,
false, false,
cfg->passive[0],
MAX_CHANNELS_2GHZ,
&n_pactive_ch,
scan_type);
cfg->passive[1] =
wlcore_scan_get_channels(wl,
channels,
n_channels,
n_ssids,
cfg->channels_5,
IEEE80211_BAND_5GHZ,
false, true, 0,
wl->max_channels_5,
&n_pactive_ch,
scan_type);
cfg->dfs =
wlcore_scan_get_channels(wl,
channels,
n_channels,
n_ssids,
cfg->channels_5,
IEEE80211_BAND_5GHZ,
true, true,
cfg->passive[1],
wl->max_channels_5,
&n_pactive_ch,
scan_type);
cfg->active[1] =
wlcore_scan_get_channels(wl,
channels,
n_channels,
n_ssids,
cfg->channels_5,
IEEE80211_BAND_5GHZ,
false, false,
cfg->passive[1] + cfg->dfs,
wl->max_channels_5,
&n_pactive_ch,
scan_type);
/* 802.11j channels are not supported yet */
cfg->passive[2] = 0;
cfg->active[2] = 0;
cfg->passive_active = n_pactive_ch;
wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d",
cfg->active[0], cfg->passive[0]);
wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d",
cfg->active[1], cfg->passive[1]);
wl1271_debug(DEBUG_SCAN, " DFS: %d", cfg->dfs);
return cfg->passive[0] || cfg->active[0] ||
cfg->passive[1] || cfg->active[1] || cfg->dfs ||
cfg->passive[2] || cfg->active[2];
}
EXPORT_SYMBOL_GPL(wlcore_set_scan_chan_params);
int wlcore_scan(struct wl1271 *wl, struct ieee80211_vif *vif,
const u8 *ssid, size_t ssid_len,
struct cfg80211_scan_request *req)
{
struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
/*
* cfg80211 should guarantee that we don't get more channels
* than what we have registered.
*/
BUG_ON(req->n_channels > WL1271_MAX_CHANNELS);
if (wl->scan.state != WL1271_SCAN_STATE_IDLE)
return -EBUSY;
wl->scan.state = WL1271_SCAN_STATE_2GHZ_ACTIVE;
if (ssid_len && ssid) {
wl->scan.ssid_len = ssid_len;
memcpy(wl->scan.ssid, ssid, ssid_len);
} else {
wl->scan.ssid_len = 0;
}
wl->scan_wlvif = wlvif;
wl->scan.req = req;
memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
/* we assume failure so that timeout scenarios are handled correctly */
wl->scan.failed = true;
ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,
msecs_to_jiffies(WL1271_SCAN_TIMEOUT));
wl->ops->scan_start(wl, wlvif, req);
return 0;
}
/* Returns the scan type to be used or a negative value on error */
int
wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl,
struct wl12xx_vif *wlvif,
struct cfg80211_sched_scan_request *req)
{
struct wl1271_cmd_sched_scan_ssid_list *cmd = NULL;
struct cfg80211_match_set *sets = req->match_sets;
struct cfg80211_ssid *ssids = req->ssids;
int ret = 0, type, i, j, n_match_ssids = 0;
wl1271_debug(DEBUG_CMD, "cmd sched scan ssid list");
/* count the match sets that contain SSIDs */
for (i = 0; i < req->n_match_sets; i++)
if (sets[i].ssid.ssid_len > 0)
n_match_ssids++;
/* No filter, no ssids or only bcast ssid */
if (!n_match_ssids &&
(!req->n_ssids ||
(req->n_ssids == 1 && req->ssids[0].ssid_len == 0))) {
type = SCAN_SSID_FILTER_ANY;
goto out;
}
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->role_id = wlvif->role_id;
if (!n_match_ssids) {
/* No filter, with ssids */
type = SCAN_SSID_FILTER_DISABLED;
for (i = 0; i < req->n_ssids; i++) {
cmd->ssids[cmd->n_ssids].type = (ssids[i].ssid_len) ?
SCAN_SSID_TYPE_HIDDEN : SCAN_SSID_TYPE_PUBLIC;
cmd->ssids[cmd->n_ssids].len = ssids[i].ssid_len;
memcpy(cmd->ssids[cmd->n_ssids].ssid, ssids[i].ssid,
ssids[i].ssid_len);
cmd->n_ssids++;
}
} else {
type = SCAN_SSID_FILTER_LIST;
/* Add all SSIDs from the filters */
for (i = 0; i < req->n_match_sets; i++) {
/* ignore sets without SSIDs */
if (!sets[i].ssid.ssid_len)
continue;
cmd->ssids[cmd->n_ssids].type = SCAN_SSID_TYPE_PUBLIC;
cmd->ssids[cmd->n_ssids].len = sets[i].ssid.ssid_len;
memcpy(cmd->ssids[cmd->n_ssids].ssid,
sets[i].ssid.ssid, sets[i].ssid.ssid_len);
cmd->n_ssids++;
}
if ((req->n_ssids > 1) ||
(req->n_ssids == 1 && req->ssids[0].ssid_len > 0)) {
/*
* Mark all the SSIDs passed in the SSID list as HIDDEN,
* so they're used in probe requests.
*/
for (i = 0; i < req->n_ssids; i++) {
if (!req->ssids[i].ssid_len)
continue;
for (j = 0; j < cmd->n_ssids; j++)
if ((req->ssids[i].ssid_len ==
cmd->ssids[j].len) &&
!memcmp(req->ssids[i].ssid,
cmd->ssids[j].ssid,
req->ssids[i].ssid_len)) {
cmd->ssids[j].type =
SCAN_SSID_TYPE_HIDDEN;
break;
}
/* Fail if SSID isn't present in the filters */
if (j == cmd->n_ssids) {
ret = -EINVAL;
goto out_free;
}
}
}
}
wl1271_dump(DEBUG_SCAN, "SSID_LIST: ", cmd, sizeof(*cmd));
ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_SSID_CFG, cmd,
sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("cmd sched scan ssid list failed");
goto out_free;
}
out_free:
kfree(cmd);
out:
if (ret < 0)
return ret;
return type;
}
EXPORT_SYMBOL_GPL(wlcore_scan_sched_scan_ssid_list);
void wl1271_scan_sched_scan_results(struct wl1271 *wl)
{
wl1271_debug(DEBUG_SCAN, "got periodic scan results");
ieee80211_sched_scan_results(wl->hw);
}