forked from Minki/linux
c697eecebc
On ACPI systems the target state set by acpi_pm_set_target() is reset by acpi_pm_finish(), but that need not be called if the suspend fails. All platforms that use the .set_target() global suspend callback are affected by analogous issues. For this reason, we need an additional global suspend callback that will reset the target state regardless of whether or not the suspend is successful. Also, it is reasonable to rename the .set_target() callback, since it will be used for a different purpose on ACPI systems (due to ACPI 1.0x code ordering requirements). Introduce the global suspend callback .end() to be executed at the end of the suspend sequence and rename the .set_target() global suspend callback to .begin(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
241 lines
5.9 KiB
C
241 lines
5.9 KiB
C
#include <linux/init.h>
|
|
#include <linux/suspend.h>
|
|
#include <asm/io.h>
|
|
#include <asm/time.h>
|
|
#include <asm/mpc52xx.h>
|
|
#include "mpc52xx_pic.h"
|
|
|
|
/* defined in lite5200_sleep.S and only used here */
|
|
extern void lite5200_low_power(void __iomem *sram, void __iomem *mbar);
|
|
|
|
static struct mpc52xx_cdm __iomem *cdm;
|
|
static struct mpc52xx_intr __iomem *pic;
|
|
static struct mpc52xx_sdma __iomem *bes;
|
|
static struct mpc52xx_xlb __iomem *xlb;
|
|
static struct mpc52xx_gpio __iomem *gps;
|
|
static struct mpc52xx_gpio_wkup __iomem *gpw;
|
|
static void __iomem *sram;
|
|
static const int sram_size = 0x4000; /* 16 kBytes */
|
|
static void __iomem *mbar;
|
|
|
|
static suspend_state_t lite5200_pm_target_state;
|
|
|
|
static int lite5200_pm_valid(suspend_state_t state)
|
|
{
|
|
switch (state) {
|
|
case PM_SUSPEND_STANDBY:
|
|
case PM_SUSPEND_MEM:
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int lite5200_pm_begin(suspend_state_t state)
|
|
{
|
|
if (lite5200_pm_valid(state)) {
|
|
lite5200_pm_target_state = state;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int lite5200_pm_prepare(void)
|
|
{
|
|
struct device_node *np;
|
|
const struct of_device_id immr_ids[] = {
|
|
{ .compatible = "fsl,mpc5200-immr", },
|
|
{ .compatible = "fsl,mpc5200b-immr", },
|
|
{ .type = "soc", .compatible = "mpc5200", }, /* lite5200 */
|
|
{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
|
|
{}
|
|
};
|
|
|
|
/* deep sleep? let mpc52xx code handle that */
|
|
if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
|
|
return mpc52xx_pm_prepare();
|
|
|
|
if (lite5200_pm_target_state != PM_SUSPEND_MEM)
|
|
return -EINVAL;
|
|
|
|
/* map registers */
|
|
np = of_find_matching_node(NULL, immr_ids);
|
|
mbar = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
if (!mbar) {
|
|
printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
|
|
return -ENOSYS;
|
|
}
|
|
|
|
cdm = mbar + 0x200;
|
|
pic = mbar + 0x500;
|
|
gps = mbar + 0xb00;
|
|
gpw = mbar + 0xc00;
|
|
bes = mbar + 0x1200;
|
|
xlb = mbar + 0x1f00;
|
|
sram = mbar + 0x8000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* save and restore registers not bound to any real devices */
|
|
static struct mpc52xx_cdm scdm;
|
|
static struct mpc52xx_intr spic;
|
|
static struct mpc52xx_sdma sbes;
|
|
static struct mpc52xx_xlb sxlb;
|
|
static struct mpc52xx_gpio sgps;
|
|
static struct mpc52xx_gpio_wkup sgpw;
|
|
|
|
static void lite5200_save_regs(void)
|
|
{
|
|
_memcpy_fromio(&spic, pic, sizeof(*pic));
|
|
_memcpy_fromio(&sbes, bes, sizeof(*bes));
|
|
_memcpy_fromio(&scdm, cdm, sizeof(*cdm));
|
|
_memcpy_fromio(&sxlb, xlb, sizeof(*xlb));
|
|
_memcpy_fromio(&sgps, gps, sizeof(*gps));
|
|
_memcpy_fromio(&sgpw, gpw, sizeof(*gpw));
|
|
|
|
_memcpy_fromio(saved_sram, sram, sram_size);
|
|
}
|
|
|
|
static void lite5200_restore_regs(void)
|
|
{
|
|
int i;
|
|
_memcpy_toio(sram, saved_sram, sram_size);
|
|
|
|
|
|
/*
|
|
* GPIOs. Interrupt Master Enable has higher address then other
|
|
* registers, so just memcpy is ok.
|
|
*/
|
|
_memcpy_toio(gpw, &sgpw, sizeof(*gpw));
|
|
_memcpy_toio(gps, &sgps, sizeof(*gps));
|
|
|
|
|
|
/* XLB Arbitrer */
|
|
out_be32(&xlb->snoop_window, sxlb.snoop_window);
|
|
out_be32(&xlb->master_priority, sxlb.master_priority);
|
|
out_be32(&xlb->master_pri_enable, sxlb.master_pri_enable);
|
|
|
|
/* enable */
|
|
out_be32(&xlb->int_enable, sxlb.int_enable);
|
|
out_be32(&xlb->config, sxlb.config);
|
|
|
|
|
|
/* CDM - Clock Distribution Module */
|
|
out_8(&cdm->ipb_clk_sel, scdm.ipb_clk_sel);
|
|
out_8(&cdm->pci_clk_sel, scdm.pci_clk_sel);
|
|
|
|
out_8(&cdm->ext_48mhz_en, scdm.ext_48mhz_en);
|
|
out_8(&cdm->fd_enable, scdm.fd_enable);
|
|
out_be16(&cdm->fd_counters, scdm.fd_counters);
|
|
|
|
out_be32(&cdm->clk_enables, scdm.clk_enables);
|
|
|
|
out_8(&cdm->osc_disable, scdm.osc_disable);
|
|
|
|
out_be16(&cdm->mclken_div_psc1, scdm.mclken_div_psc1);
|
|
out_be16(&cdm->mclken_div_psc2, scdm.mclken_div_psc2);
|
|
out_be16(&cdm->mclken_div_psc3, scdm.mclken_div_psc3);
|
|
out_be16(&cdm->mclken_div_psc6, scdm.mclken_div_psc6);
|
|
|
|
|
|
/* BESTCOMM */
|
|
out_be32(&bes->taskBar, sbes.taskBar);
|
|
out_be32(&bes->currentPointer, sbes.currentPointer);
|
|
out_be32(&bes->endPointer, sbes.endPointer);
|
|
out_be32(&bes->variablePointer, sbes.variablePointer);
|
|
|
|
out_8(&bes->IntVect1, sbes.IntVect1);
|
|
out_8(&bes->IntVect2, sbes.IntVect2);
|
|
out_be16(&bes->PtdCntrl, sbes.PtdCntrl);
|
|
|
|
for (i=0; i<32; i++)
|
|
out_8(&bes->ipr[i], sbes.ipr[i]);
|
|
|
|
out_be32(&bes->cReqSelect, sbes.cReqSelect);
|
|
out_be32(&bes->task_size0, sbes.task_size0);
|
|
out_be32(&bes->task_size1, sbes.task_size1);
|
|
out_be32(&bes->MDEDebug, sbes.MDEDebug);
|
|
out_be32(&bes->ADSDebug, sbes.ADSDebug);
|
|
out_be32(&bes->Value1, sbes.Value1);
|
|
out_be32(&bes->Value2, sbes.Value2);
|
|
out_be32(&bes->Control, sbes.Control);
|
|
out_be32(&bes->Status, sbes.Status);
|
|
out_be32(&bes->PTDDebug, sbes.PTDDebug);
|
|
|
|
/* restore tasks */
|
|
for (i=0; i<16; i++)
|
|
out_be16(&bes->tcr[i], sbes.tcr[i]);
|
|
|
|
/* enable interrupts */
|
|
out_be32(&bes->IntPend, sbes.IntPend);
|
|
out_be32(&bes->IntMask, sbes.IntMask);
|
|
|
|
|
|
/* PIC */
|
|
out_be32(&pic->per_pri1, spic.per_pri1);
|
|
out_be32(&pic->per_pri2, spic.per_pri2);
|
|
out_be32(&pic->per_pri3, spic.per_pri3);
|
|
|
|
out_be32(&pic->main_pri1, spic.main_pri1);
|
|
out_be32(&pic->main_pri2, spic.main_pri2);
|
|
|
|
out_be32(&pic->enc_status, spic.enc_status);
|
|
|
|
/* unmask and enable interrupts */
|
|
out_be32(&pic->per_mask, spic.per_mask);
|
|
out_be32(&pic->main_mask, spic.main_mask);
|
|
out_be32(&pic->ctrl, spic.ctrl);
|
|
}
|
|
|
|
static int lite5200_pm_enter(suspend_state_t state)
|
|
{
|
|
/* deep sleep? let mpc52xx code handle that */
|
|
if (state == PM_SUSPEND_STANDBY) {
|
|
return mpc52xx_pm_enter(state);
|
|
}
|
|
|
|
lite5200_save_regs();
|
|
|
|
/* effectively save FP regs */
|
|
enable_kernel_fp();
|
|
|
|
lite5200_low_power(sram, mbar);
|
|
|
|
lite5200_restore_regs();
|
|
|
|
/* restart jiffies */
|
|
wakeup_decrementer();
|
|
|
|
iounmap(mbar);
|
|
return 0;
|
|
}
|
|
|
|
static void lite5200_pm_finish(void)
|
|
{
|
|
/* deep sleep? let mpc52xx code handle that */
|
|
if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
|
|
mpc52xx_pm_finish();
|
|
}
|
|
|
|
static void lite5200_pm_end(void)
|
|
{
|
|
lite5200_pm_target_state = PM_SUSPEND_ON;
|
|
}
|
|
|
|
static struct platform_suspend_ops lite5200_pm_ops = {
|
|
.valid = lite5200_pm_valid,
|
|
.begin = lite5200_pm_begin,
|
|
.prepare = lite5200_pm_prepare,
|
|
.enter = lite5200_pm_enter,
|
|
.finish = lite5200_pm_finish,
|
|
.end = lite5200_pm_end,
|
|
};
|
|
|
|
int __init lite5200_pm_init(void)
|
|
{
|
|
suspend_set_ops(&lite5200_pm_ops);
|
|
return 0;
|
|
}
|