forked from Minki/linux
2437b27c3a
Since we're now going to setup the USBPCTRL0 register using the USB PHY device's platform data, we now need a way to pass those platform data from the board file to the device which is situated in setup-r8a7779.c -- and what I'm suggesting is r8a7779_add_usb_phy_device() that will register USB PHY platform device with the passed platform data using platform_device_register_resndata() call; creating this function involves deletion of 'usb_phy_device' from r8a7779_devices_dt[], so that it will no longer be registered for the generic R8A7779 machine (where we can't provide the platform data anyway), hence EHCI/OHCI drivers will fail to load as well. For the Marzen board, this new function will be called from marzen_init() to register the USB PHY device early enough. Note that the board and the SoC code have to be in one patch to keep the code bisectable... The patch has been tested on the Marzen board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms+renesas@verge.net.au: manually applied] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
250 lines
6.6 KiB
C
250 lines
6.6 KiB
C
/*
|
|
* marzen board support
|
|
*
|
|
* Copyright (C) 2011 Renesas Solutions Corp.
|
|
* Copyright (C) 2011 Magnus Damm
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/platform_data/gpio-rcar.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/sh_hspi.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/sh_mobile_sdhi.h>
|
|
#include <linux/mfd/tmio.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/r8a7779.h>
|
|
#include <mach/common.h>
|
|
#include <mach/irqs.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/traps.h>
|
|
|
|
/* Fixed 3.3V regulator to be used by SDHI0 */
|
|
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
|
|
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
|
|
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
|
|
};
|
|
|
|
/* Dummy supplies, where voltage doesn't matter */
|
|
static struct regulator_consumer_supply dummy_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
|
|
};
|
|
|
|
static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
|
|
|
|
/* SMSC LAN89218 */
|
|
static struct resource smsc911x_resources[] = {
|
|
[0] = {
|
|
.start = 0x18000000, /* ExCS0 */
|
|
.end = 0x180000ff, /* A1->A7 */
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = gic_iid(0x3c), /* IRQ 1 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct smsc911x_platform_config smsc911x_platdata = {
|
|
.flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
};
|
|
|
|
static struct platform_device eth_device = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &smsc911x_platdata,
|
|
},
|
|
.resource = smsc911x_resources,
|
|
.num_resources = ARRAY_SIZE(smsc911x_resources),
|
|
};
|
|
|
|
static struct resource sdhi0_resources[] = {
|
|
[0] = {
|
|
.name = "sdhi0",
|
|
.start = 0xffe4c000,
|
|
.end = 0xffe4c0ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = gic_iid(0x88),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct sh_mobile_sdhi_info sdhi0_platform_data = {
|
|
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
|
|
};
|
|
|
|
static struct platform_device sdhi0_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi0_resources),
|
|
.resource = sdhi0_resources,
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &sdhi0_platform_data,
|
|
}
|
|
};
|
|
|
|
/* Thermal */
|
|
static struct resource thermal_resources[] = {
|
|
[0] = {
|
|
.start = 0xFFC48000,
|
|
.end = 0xFFC48038 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device thermal_device = {
|
|
.name = "rcar_thermal",
|
|
.resource = thermal_resources,
|
|
.num_resources = ARRAY_SIZE(thermal_resources),
|
|
};
|
|
|
|
/* HSPI */
|
|
static struct resource hspi_resources[] = {
|
|
[0] = {
|
|
.start = 0xFFFC7000,
|
|
.end = 0xFFFC7018 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device hspi_device = {
|
|
.name = "sh-hspi",
|
|
.id = 0,
|
|
.resource = hspi_resources,
|
|
.num_resources = ARRAY_SIZE(hspi_resources),
|
|
};
|
|
|
|
/* LEDS */
|
|
static struct gpio_led marzen_leds[] = {
|
|
{
|
|
.name = "led2",
|
|
.gpio = RCAR_GP_PIN(4, 29),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}, {
|
|
.name = "led3",
|
|
.gpio = RCAR_GP_PIN(4, 30),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}, {
|
|
.name = "led4",
|
|
.gpio = RCAR_GP_PIN(4, 31),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data marzen_leds_pdata = {
|
|
.leds = marzen_leds,
|
|
.num_leds = ARRAY_SIZE(marzen_leds),
|
|
};
|
|
|
|
static struct platform_device leds_device = {
|
|
.name = "leds-gpio",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &marzen_leds_pdata,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *marzen_devices[] __initdata = {
|
|
ð_device,
|
|
&sdhi0_device,
|
|
&thermal_device,
|
|
&hspi_device,
|
|
&leds_device,
|
|
};
|
|
|
|
static const struct pinctrl_map marzen_pinctrl_map[] = {
|
|
/* HSPI0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
|
|
"hspi0", "hspi0"),
|
|
/* SCIF2 (CN18: DEBUG0) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
|
|
"scif2_data_c", "scif2"),
|
|
/* SCIF4 (CN19: DEBUG1) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
|
|
"scif4_data", "scif4"),
|
|
/* SDHI0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
|
|
"sdhi0_data4", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
|
|
"sdhi0_ctrl", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
|
|
"sdhi0_cd", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
|
|
"sdhi0_wp", "sdhi0"),
|
|
/* SMSC */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
|
|
"intc_irq1_b", "intc"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
|
|
"lbsc_ex_cs0", "lbsc"),
|
|
/* USB0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
|
|
"usb0", "usb0"),
|
|
/* USB1 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
|
|
"usb1", "usb1"),
|
|
/* USB2 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
|
|
"usb2", "usb2"),
|
|
};
|
|
|
|
static void __init marzen_init(void)
|
|
{
|
|
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
|
|
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
|
|
regulator_register_fixed(1, dummy_supplies,
|
|
ARRAY_SIZE(dummy_supplies));
|
|
|
|
pinctrl_register_mappings(marzen_pinctrl_map,
|
|
ARRAY_SIZE(marzen_pinctrl_map));
|
|
r8a7779_pinmux_init();
|
|
|
|
r8a7779_add_standard_devices();
|
|
r8a7779_add_usb_phy_device(&usb_phy_platform_data);
|
|
platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
|
|
}
|
|
|
|
MACHINE_START(MARZEN, "marzen")
|
|
.smp = smp_ops(r8a7779_smp_ops),
|
|
.map_io = r8a7779_map_io,
|
|
.init_early = r8a7779_add_early_devices,
|
|
.nr_irqs = NR_IRQS_LEGACY,
|
|
.init_irq = r8a7779_init_irq,
|
|
.init_machine = marzen_init,
|
|
.init_late = r8a7779_init_late,
|
|
.init_time = r8a7779_earlytimer_init,
|
|
MACHINE_END
|