linux/Documentation/devicetree/bindings/arm/omap
Rajendra Nayak f12ecbe2ea ARM: dts: omap: Add reset/idle on init bindings for OMAP
On OMAP we have co-processor IPs, memory controllers,
GPIOs which control regulators and power switches to
PMIC, and SoC internal Bus IPs, some or most of which
should either not be reset or idled or both at init.
(In some cases there are erratas which prevent an IP
from being reset)
Have a way to pass this information from DT.

Update the am33xx/omap4 and omap5 dtsi files with the
new bindings for modules which either should not be
idled. reset or both. A later patch would cleanup the
same information that exists today as part of the hwmod
data files.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-20 19:16:08 +02:00
..
counter.txt ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
dsp.txt arm/dts: OMAP3+: Add mpu, dsp and iva nodes 2011-10-04 22:29:40 +02:00
intc.txt ARM: OMAP2/3: intc: Add DT support for TI interrupt controller 2012-02-27 10:33:18 +01:00
iva.txt arm/dts: OMAP3+: Add mpu, dsp and iva nodes 2011-10-04 22:29:40 +02:00
l3-noc.txt Documentation: dt: OMAP: l3-noc: Add *reg* in required properties 2013-04-09 00:21:19 +02:00
mpu.txt arm/dts: OMAP3+: Add mpu, dsp and iva nodes 2011-10-04 22:29:40 +02:00
omap.txt ARM: dts: omap: Add reset/idle on init bindings for OMAP 2013-10-20 19:16:08 +02:00
timer.txt ARM: dts: OMAP2+: Update DMTIMER compatibility property 2013-04-09 00:21:31 +02:00