forked from Minki/linux
1a49e2ac96
This patch (as1564c) converts the EHCI platform drivers to use the central ehci_setup() routine for generic controller initialization rather than each having its own idiosyncratic approach. The major point of difficulty lies in ehci-pci's many vendor- and device-specific workarounds. Some of them have to be applied before calling ehci_setup() and some after, which necessitates a fair amount of code motion. The other platform drivers require much smaller changes. One point not addressed by the patch is whether ports should be powered on or off following initialization. The different drivers appear to handle this pretty much at random. In fact it shouldn't matter, because the hub driver turns on power to all ports when it binds to the root hub. Straightening that out will be left for another day. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
371 lines
8.6 KiB
C
371 lines
8.6 KiB
C
/*
|
|
* PMC MSP EHCI (Host Controller Driver) for USB.
|
|
*
|
|
* (C) Copyright 2006-2010 PMC-Sierra Inc
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
*/
|
|
|
|
/* includes */
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/usb.h>
|
|
#include <msp_usb.h>
|
|
|
|
/* stream disable*/
|
|
#define USB_CTRL_MODE_STREAM_DISABLE 0x10
|
|
|
|
/* threshold */
|
|
#define USB_CTRL_FIFO_THRESH 0x00300000
|
|
|
|
/* register offset for usb_mode */
|
|
#define USB_EHCI_REG_USB_MODE 0x68
|
|
|
|
/* register offset for usb fifo */
|
|
#define USB_EHCI_REG_USB_FIFO 0x24
|
|
|
|
/* register offset for usb status */
|
|
#define USB_EHCI_REG_USB_STATUS 0x44
|
|
|
|
/* serial/parallel transceiver */
|
|
#define USB_EHCI_REG_BIT_STAT_STS (1<<29)
|
|
|
|
/* TWI USB0 host device pin */
|
|
#define MSP_PIN_USB0_HOST_DEV 49
|
|
|
|
/* TWI USB1 host device pin */
|
|
#define MSP_PIN_USB1_HOST_DEV 50
|
|
|
|
|
|
static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
|
|
{
|
|
u8 *base;
|
|
u8 *statreg;
|
|
u8 *fiforeg;
|
|
u32 val;
|
|
struct ehci_regs *reg_base = ehci->regs;
|
|
|
|
/* get register base */
|
|
base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE;
|
|
statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS;
|
|
fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO;
|
|
|
|
/* Disable controller mode stream */
|
|
val = ehci_readl(ehci, (u32 *)base);
|
|
ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE),
|
|
(u32 *)base);
|
|
|
|
/* clear STS to select parallel transceiver interface */
|
|
val = ehci_readl(ehci, (u32 *)statreg);
|
|
val = val & ~USB_EHCI_REG_BIT_STAT_STS;
|
|
ehci_writel(ehci, val, (u32 *)statreg);
|
|
|
|
/* write to set the proper fifo threshold */
|
|
ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg);
|
|
|
|
/* set TWI GPIO USB_HOST_DEV pin high */
|
|
gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1);
|
|
#endif
|
|
}
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int ehci_msp_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
int retval;
|
|
|
|
ehci->big_endian_mmio = 1;
|
|
ehci->big_endian_desc = 1;
|
|
|
|
ehci->caps = hcd->regs;
|
|
hcd->has_tt = 1;
|
|
|
|
retval = ehci_setup(hcd);
|
|
if (retval)
|
|
return retval;
|
|
|
|
usb_hcd_tdi_set_mode(ehci);
|
|
ehci_port_power(ehci, 0);
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* configure so an HC device and id are always provided
|
|
* always called with process context; sleeping is OK
|
|
*/
|
|
|
|
static int usb_hcd_msp_map_regs(struct mspusb_device *dev)
|
|
{
|
|
struct resource *res;
|
|
struct platform_device *pdev = &dev->dev;
|
|
u32 res_len;
|
|
int retval;
|
|
|
|
/* MAB register space */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (res == NULL)
|
|
return -ENOMEM;
|
|
res_len = resource_size(res);
|
|
if (!request_mem_region(res->start, res_len, "mab regs"))
|
|
return -EBUSY;
|
|
|
|
dev->mab_regs = ioremap_nocache(res->start, res_len);
|
|
if (dev->mab_regs == NULL) {
|
|
retval = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
/* MSP USB register space */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
|
|
if (res == NULL) {
|
|
retval = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
res_len = resource_size(res);
|
|
if (!request_mem_region(res->start, res_len, "usbid regs")) {
|
|
retval = -EBUSY;
|
|
goto err2;
|
|
}
|
|
dev->usbid_regs = ioremap_nocache(res->start, res_len);
|
|
if (dev->usbid_regs == NULL) {
|
|
retval = -ENOMEM;
|
|
goto err3;
|
|
}
|
|
|
|
return 0;
|
|
err3:
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
|
|
res_len = resource_size(res);
|
|
release_mem_region(res->start, res_len);
|
|
err2:
|
|
iounmap(dev->mab_regs);
|
|
err1:
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
res_len = resource_size(res);
|
|
release_mem_region(res->start, res_len);
|
|
dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n");
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* usb_hcd_msp_probe - initialize PMC MSP-based HCDs
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Allocates basic resources for this USB host controller, and
|
|
* then invokes the start() method for the HCD associated with it
|
|
* through the hotplug entry's driver_data.
|
|
*
|
|
*/
|
|
int usb_hcd_msp_probe(const struct hc_driver *driver,
|
|
struct platform_device *dev)
|
|
{
|
|
int retval;
|
|
struct usb_hcd *hcd;
|
|
struct resource *res;
|
|
struct ehci_hcd *ehci ;
|
|
|
|
hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp");
|
|
if (!hcd)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
pr_debug("No IOMEM resource info for %s.\n", dev->name);
|
|
retval = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) {
|
|
retval = -EBUSY;
|
|
goto err1;
|
|
}
|
|
hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
|
|
if (!hcd->regs) {
|
|
pr_debug("ioremap failed");
|
|
retval = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
|
|
if (res == NULL) {
|
|
dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name);
|
|
retval = -ENOMEM;
|
|
goto err3;
|
|
}
|
|
|
|
/* Map non-EHCI register spaces */
|
|
retval = usb_hcd_msp_map_regs(to_mspusb_device(dev));
|
|
if (retval != 0)
|
|
goto err3;
|
|
|
|
ehci = hcd_to_ehci(hcd);
|
|
ehci->big_endian_mmio = 1;
|
|
ehci->big_endian_desc = 1;
|
|
|
|
|
|
retval = usb_add_hcd(hcd, res->start, IRQF_SHARED);
|
|
if (retval == 0)
|
|
return 0;
|
|
|
|
usb_remove_hcd(hcd);
|
|
err3:
|
|
iounmap(hcd->regs);
|
|
err2:
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
err1:
|
|
usb_put_hcd(hcd);
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs
|
|
* @dev: USB Host Controller being removed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Reverses the effect of usb_hcd_msp_probe(), first invoking
|
|
* the HCD's stop() method. It is always called from a thread
|
|
* context, normally "rmmod", "apmd", or something similar.
|
|
*
|
|
* may be called without controller electrically present
|
|
* may be called with controller, bus, and devices active
|
|
*/
|
|
void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev)
|
|
{
|
|
usb_remove_hcd(hcd);
|
|
iounmap(hcd->regs);
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
usb_put_hcd(hcd);
|
|
}
|
|
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
/*
|
|
* Wrapper around the main ehci_irq. Since both USB host controllers are
|
|
* sharing the same IRQ, need to first determine whether we're the intended
|
|
* recipient of this interrupt.
|
|
*/
|
|
static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd)
|
|
{
|
|
u32 int_src;
|
|
struct device *dev = hcd->self.controller;
|
|
struct platform_device *pdev;
|
|
struct mspusb_device *mdev;
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
/* need to reverse-map a couple of containers to get our device */
|
|
pdev = to_platform_device(dev);
|
|
mdev = to_mspusb_device(pdev);
|
|
|
|
/* Check to see if this interrupt is for this host controller */
|
|
int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat);
|
|
if (int_src & (1 << pdev->id))
|
|
return ehci_irq(hcd);
|
|
|
|
/* Not for this device */
|
|
return IRQ_NONE;
|
|
}
|
|
#endif /* DUAL_USB */
|
|
|
|
static const struct hc_driver ehci_msp_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "PMC MSP EHCI",
|
|
.hcd_priv_size = sizeof(struct ehci_hcd),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
.irq = ehci_msp_irq,
|
|
#else
|
|
.irq = ehci_irq,
|
|
#endif
|
|
.flags = HCD_MEMORY | HCD_USB2,
|
|
|
|
/*
|
|
* basic lifecycle operations
|
|
*/
|
|
.reset = ehci_msp_setup,
|
|
.start = ehci_run,
|
|
.shutdown = ehci_shutdown,
|
|
.start = ehci_run,
|
|
.stop = ehci_stop,
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = ehci_urb_enqueue,
|
|
.urb_dequeue = ehci_urb_dequeue,
|
|
.endpoint_disable = ehci_endpoint_disable,
|
|
.endpoint_reset = ehci_endpoint_reset,
|
|
|
|
/*
|
|
* scheduling support
|
|
*/
|
|
.get_frame_number = ehci_get_frame,
|
|
|
|
/*
|
|
* root hub support
|
|
*/
|
|
.hub_status_data = ehci_hub_status_data,
|
|
.hub_control = ehci_hub_control,
|
|
.bus_suspend = ehci_bus_suspend,
|
|
.bus_resume = ehci_bus_resume,
|
|
.relinquish_port = ehci_relinquish_port,
|
|
.port_handed_over = ehci_port_handed_over,
|
|
|
|
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
|
|
};
|
|
|
|
static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
|
|
pr_debug("In ehci_hcd_msp_drv_probe");
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO");
|
|
#endif
|
|
|
|
ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
usb_hcd_msp_remove(hcd, pdev);
|
|
|
|
/* free TWI GPIO USB_HOST_DEV pin */
|
|
gpio_free(MSP_PIN_USB0_HOST_DEV);
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
gpio_free(MSP_PIN_USB1_HOST_DEV);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("pmcmsp-ehci");
|
|
|
|
static struct platform_driver ehci_hcd_msp_driver = {
|
|
.probe = ehci_hcd_msp_drv_probe,
|
|
.remove = ehci_hcd_msp_drv_remove,
|
|
.driver = {
|
|
.name = "pmcmsp-ehci",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|