forked from Minki/linux
17f0f738e5
Move the Ethernet node from the root of the device tree to the BSC node, as it's connected to the Bus State Controller. This allows the system to know the right position of the Ethernet node in the clock and PM domain hierarchy, and manage the clock and PM domain appropriately. Also rename the node's name from "lan9220" to "ethernet", to conform to ePAPR generic name recomendations. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
401 lines
7.7 KiB
Plaintext
401 lines
7.7 KiB
Plaintext
/*
|
|
* Device Tree Source for the KZM-A9-GT board
|
|
*
|
|
* Copyright (C) 2012 Horms Solutions Ltd.
|
|
*
|
|
* Based on sh73a0-kzm9g.dts
|
|
* Copyright (C) 2012 Renesas Solutions Corp.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "sh73a0.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "KZM-A9-GT";
|
|
compatible = "renesas,kzm9g", "renesas,sh73a0";
|
|
|
|
aliases {
|
|
serial4 = &scifa4;
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vdd_dvfs>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
1196000 1315000
|
|
598000 1175000
|
|
398667 1065000
|
|
>;
|
|
voltage-tolerance = <1>; /* 1% */
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
|
|
stdout-path = &scifa4;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x40000000 0x20000000>;
|
|
};
|
|
|
|
reg_1p8v: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reg_3p3v: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vmmc_sdhi0: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "SDHI0 Vcc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vmmc_sdhi2: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "SDHI2 Vcc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
led1 {
|
|
gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
|
|
label = "LED1";
|
|
};
|
|
led2 {
|
|
gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
|
|
label = "LED2";
|
|
};
|
|
led3 {
|
|
gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
|
|
label = "LED3";
|
|
};
|
|
led4 {
|
|
gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
|
|
label = "LED4";
|
|
};
|
|
};
|
|
|
|
keyboard {
|
|
compatible = "gpio-keys";
|
|
|
|
back-key {
|
|
gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_BACK>;
|
|
label = "SW3";
|
|
};
|
|
|
|
right-key {
|
|
gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RIGHT>;
|
|
label = "SW2-R";
|
|
};
|
|
|
|
left-key {
|
|
gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_LEFT>;
|
|
label = "SW2-L";
|
|
};
|
|
|
|
enter-key {
|
|
gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_ENTER>;
|
|
label = "SW2-P";
|
|
};
|
|
|
|
up-key {
|
|
gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_UP>;
|
|
label = "SW2-U";
|
|
};
|
|
|
|
down-key {
|
|
gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_DOWN>;
|
|
label = "SW2-D";
|
|
};
|
|
|
|
home-key {
|
|
gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_HOME>;
|
|
label = "SW1";
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "left_j";
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&sh_fsi2 0>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&ak4648>;
|
|
bitclock-master;
|
|
frame-master;
|
|
system-clock-frequency = <11289600>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&bsc {
|
|
ethernet@10000000 {
|
|
compatible = "smsc,lan9220", "smsc,lan9115";
|
|
reg = <0x10000000 0x100>;
|
|
phy-mode = "mii";
|
|
interrupt-parent = <&irqpin0>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
|
reg-io-width = <4>;
|
|
smsc,irq-push-pull;
|
|
smsc,save-mac-address;
|
|
vddvario-supply = <®_1p8v>;
|
|
vdd33a-supply = <®_3p3v>;
|
|
};
|
|
};
|
|
|
|
&cmt1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&extal2_clk {
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
compass@c {
|
|
compatible = "asahi-kasei,ak8975";
|
|
reg = <0x0c>;
|
|
interrupt-parent = <&irqpin3>;
|
|
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
|
|
ak4648: codec@12 {
|
|
compatible = "asahi-kasei,ak4648";
|
|
reg = <0x12>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
accelerometer@1d {
|
|
compatible = "adi,adxl34x";
|
|
reg = <0x1d>;
|
|
interrupt-parent = <&irqpin3>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
|
|
<3 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
rtc@32 {
|
|
compatible = "ricoh,r2025sd";
|
|
reg = <0x32>;
|
|
};
|
|
|
|
as3711@40 {
|
|
compatible = "ams,as3711";
|
|
reg = <0x40>;
|
|
|
|
regulators {
|
|
vdd_dvfs: sd1 {
|
|
regulator-name = "1.315V CPU";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
sd2 {
|
|
regulator-name = "1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
sd4 {
|
|
regulator-name = "1.215V";
|
|
regulator-min-microvolt = <1215000>;
|
|
regulator-max-microvolt = <1235000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo2 {
|
|
regulator-name = "2.8V CPU";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo3 {
|
|
regulator-name = "3.0V CPU";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo4 {
|
|
regulator-name = "2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo5 {
|
|
regulator-name = "2.8V #2";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo7 {
|
|
regulator-name = "1.15V CPU";
|
|
regulator-min-microvolt = <1150000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo8 {
|
|
regulator-name = "1.15V CPU #2";
|
|
regulator-min-microvolt = <1150000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
touchscreen@55 {
|
|
compatible = "sitronix,st1232";
|
|
reg = <0x55>;
|
|
interrupt-parent = <&irqpin1>;
|
|
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
pcf8575: gpio@20 {
|
|
compatible = "nxp,pcf8575";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&irqpin2>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&mmcif {
|
|
pinctrl-0 = <&mmcif_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
bus-width = <8>;
|
|
vmmc-supply = <®_1p8v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pfc {
|
|
i2c3_pins: i2c3 {
|
|
renesas,groups = "i2c3_1";
|
|
renesas,function = "i2c3";
|
|
};
|
|
|
|
mmcif_pins: mmc {
|
|
mux {
|
|
renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
|
|
renesas,function = "mmc0";
|
|
};
|
|
cfg {
|
|
renesas,groups = "mmc0_data8_0";
|
|
renesas,pins = "PORT279";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
scifa4_pins: serial4 {
|
|
renesas,groups = "scifa4_data", "scifa4_ctrl";
|
|
renesas,function = "scifa4";
|
|
};
|
|
|
|
sdhi0_pins: sd0 {
|
|
renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
|
|
renesas,function = "sdhi0";
|
|
};
|
|
|
|
sdhi2_pins: sd2 {
|
|
renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
|
|
renesas,function = "sdhi2";
|
|
};
|
|
|
|
fsia_pins: sounda {
|
|
renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
|
|
"fsia_data_in", "fsia_data_out";
|
|
renesas,function = "fsia";
|
|
};
|
|
};
|
|
|
|
&scifa4 {
|
|
pinctrl-0 = <&scifa4_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhi0 {
|
|
pinctrl-0 = <&sdhi0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
vmmc-supply = <&vmmc_sdhi0>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhi2 {
|
|
pinctrl-0 = <&sdhi2_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
vmmc-supply = <&vmmc_sdhi2>;
|
|
bus-width = <4>;
|
|
broken-cd;
|
|
status = "okay";
|
|
};
|
|
|
|
&sh_fsi2 {
|
|
pinctrl-0 = <&fsia_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|