linux/drivers/pwm/pwm-atmel-hlcdc.c
Linus Torvalds 6e2bbb688a pwm: Changes for v5.3-rc1
This set of changes contains a new driver for SiFive SoCs as well as
 enhancements to the core (device links are used to track dependencies
 between PWM providers and consumers, support for PWM controllers via
 ACPI, sysfs will now suspend/resume PWMs that it has claimed) and
 various existing drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl0V/lAZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoS+uD/0cJqcVhX1c2S/pHg1k4QFh
 wREnEbxMqWghcsSZcO0gk0hoRyxMNBM3iOldaKc3b5LVtEJOv/R7W6RB+FMcvPKA
 AtW/ydyfRZiqL9bIXs0hhaW4Fo0WCq6gZksDU5cOoq4KMHfkEp7D7U158ItsEtga
 ufDigs8fv/Z6c5DaEfoJ10I+VCy/We2YnCdIVZuL/MElFHlUupzRpGZv6uMRQ4WI
 z2/SEtHURoW103a3UrEmjqv0GeoHPrHwEP9kZTUuakyMxPmUtrSUJRybi79Cf27B
 jLYql8bXSkTsV6rUBtTRNtqQjD3hdjcFYaEdOle8n52/pYFohycmVvB/3xvr9tDC
 Wildg4Rniv4lcteB1hqB0M5km/szXGjPx5wozvmctwOia5sogG+8DWGp0fZO8Gsp
 vaF+GbTrM4LV1AzGJW7icTRFQG7VFUcZAglNW4o82hcXN1j9GpQ/qSOY3vgBigx+
 vyWrbCHBH2zjJNh1sSl68zi5q90T9IlXFfgR61kujbHYws+KrO3BJE2SW7qsLhsf
 HJnMBBxpoxvusBS/kbsWsDCnoGi4UsCeKUbmbfY1OjpCNlpp+cHSk6b4134Fmi66
 D8B+a4C1I/CNhcV72P+hAdrva4UXB6oJi4hZDE2/tEioXQB2wJO4AwWzjpifqzBY
 nGxZVPV7TuXj2KwCXDQnvw==
 =nseo
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes contains a new driver for SiFive SoCs as well as
  enhancements to the core (device links are used to track dependencies
  between PWM providers and consumers, support for PWM controllers via
  ACPI, sysfs will now suspend/resume PWMs that it has claimed) and
  various existing drivers"

* tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
  pwm: fsl-ftm: Make sure to unlock mutex on failure
  pwm: fsl-ftm: Use write protection for prescaler & polarity
  pwm: fsl-ftm: More relaxed permissions for updating period
  pwm: atmel-hlcdc: Add compatible for SAM9X60 HLCDC's PWM
  pwm: bcm2835: Improve precision of PWM
  leds: pwm: Support ACPI via firmware-node framework
  pwm: Add support referencing PWMs from ACPI
  pwm: rcar: Remove suspend/resume support
  pwm: sysfs: Add suspend/resume support
  pwm: Add power management descriptions
  pwm: meson: Add documentation to the driver
  pwm: meson: Add support PWM_POLARITY_INVERSED when disabling
  pwm: meson: Don't cache struct pwm_state internally
  pwm: meson: Read the full hardware state in meson_pwm_get_state()
  pwm: meson: Simplify the calculation of the pre-divider and count
  pwm: meson: Move pwm_set_chip_data() to meson_pwm_request()
  pwm: meson: Add the per-channel register offsets and bits in a struct
  pwm: meson: Add the meson_pwm_channel data to struct meson_pwm
  pwm: meson: Pass struct pwm_device to meson_pwm_calc()
  pwm: meson: Don't duplicate the polarity internally
  ...
2019-07-09 08:57:45 -07:00

318 lines
7.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 Free Electrons
* Copyright (C) 2014 Atmel
*
* Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/mfd/atmel-hlcdc.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/regmap.h>
#define ATMEL_HLCDC_PWMCVAL_MASK GENMASK(15, 8)
#define ATMEL_HLCDC_PWMCVAL(x) (((x) << 8) & ATMEL_HLCDC_PWMCVAL_MASK)
#define ATMEL_HLCDC_PWMPOL BIT(4)
#define ATMEL_HLCDC_PWMPS_MASK GENMASK(2, 0)
#define ATMEL_HLCDC_PWMPS_MAX 0x6
#define ATMEL_HLCDC_PWMPS(x) ((x) & ATMEL_HLCDC_PWMPS_MASK)
struct atmel_hlcdc_pwm_errata {
bool slow_clk_erratum;
bool div1_clk_erratum;
};
struct atmel_hlcdc_pwm {
struct pwm_chip chip;
struct atmel_hlcdc *hlcdc;
struct clk *cur_clk;
const struct atmel_hlcdc_pwm_errata *errata;
};
static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip)
{
return container_of(chip, struct atmel_hlcdc_pwm, chip);
}
static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
struct pwm_state *state)
{
struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
struct atmel_hlcdc *hlcdc = chip->hlcdc;
unsigned int status;
int ret;
if (state->enabled) {
struct clk *new_clk = hlcdc->slow_clk;
u64 pwmcval = state->duty_cycle * 256;
unsigned long clk_freq;
u64 clk_period_ns;
u32 pwmcfg;
int pres;
if (!chip->errata || !chip->errata->slow_clk_erratum) {
clk_freq = clk_get_rate(new_clk);
if (!clk_freq)
return -EINVAL;
clk_period_ns = (u64)NSEC_PER_SEC * 256;
do_div(clk_period_ns, clk_freq);
}
/* Errata: cannot use slow clk on some IP revisions */
if ((chip->errata && chip->errata->slow_clk_erratum) ||
clk_period_ns > state->period) {
new_clk = hlcdc->sys_clk;
clk_freq = clk_get_rate(new_clk);
if (!clk_freq)
return -EINVAL;
clk_period_ns = (u64)NSEC_PER_SEC * 256;
do_div(clk_period_ns, clk_freq);
}
for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
/* Errata: cannot divide by 1 on some IP revisions */
if (!pres && chip->errata &&
chip->errata->div1_clk_erratum)
continue;
if ((clk_period_ns << pres) >= state->period)
break;
}
if (pres > ATMEL_HLCDC_PWMPS_MAX)
return -EINVAL;
pwmcfg = ATMEL_HLCDC_PWMPS(pres);
if (new_clk != chip->cur_clk) {
u32 gencfg = 0;
int ret;
ret = clk_prepare_enable(new_clk);
if (ret)
return ret;
clk_disable_unprepare(chip->cur_clk);
chip->cur_clk = new_clk;
if (new_clk == hlcdc->sys_clk)
gencfg = ATMEL_HLCDC_CLKPWMSEL;
ret = regmap_update_bits(hlcdc->regmap,
ATMEL_HLCDC_CFG(0),
ATMEL_HLCDC_CLKPWMSEL,
gencfg);
if (ret)
return ret;
}
do_div(pwmcval, state->period);
/*
* The PWM duty cycle is configurable from 0/256 to 255/256 of
* the period cycle. Hence we can't set a duty cycle occupying
* the whole period cycle if we're asked to.
* Set it to 255 if pwmcval is greater than 256.
*/
if (pwmcval > 255)
pwmcval = 255;
pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval);
if (state->polarity == PWM_POLARITY_NORMAL)
pwmcfg |= ATMEL_HLCDC_PWMPOL;
ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
ATMEL_HLCDC_PWMCVAL_MASK |
ATMEL_HLCDC_PWMPS_MASK |
ATMEL_HLCDC_PWMPOL,
pwmcfg);
if (ret)
return ret;
ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN,
ATMEL_HLCDC_PWM);
if (ret)
return ret;
ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
status,
status & ATMEL_HLCDC_PWM,
10, 0);
if (ret)
return ret;
} else {
ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS,
ATMEL_HLCDC_PWM);
if (ret)
return ret;
ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
status,
!(status & ATMEL_HLCDC_PWM),
10, 0);
if (ret)
return ret;
clk_disable_unprepare(chip->cur_clk);
chip->cur_clk = NULL;
}
return 0;
}
static const struct pwm_ops atmel_hlcdc_pwm_ops = {
.apply = atmel_hlcdc_pwm_apply,
.owner = THIS_MODULE,
};
static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_at91sam9x5_errata = {
.slow_clk_erratum = true,
};
static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
.div1_clk_erratum = true,
};
#ifdef CONFIG_PM_SLEEP
static int atmel_hlcdc_pwm_suspend(struct device *dev)
{
struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
/* Keep the periph clock enabled if the PWM is still running. */
if (pwm_is_enabled(&chip->chip.pwms[0]))
clk_disable_unprepare(chip->hlcdc->periph_clk);
return 0;
}
static int atmel_hlcdc_pwm_resume(struct device *dev)
{
struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
struct pwm_state state;
int ret;
pwm_get_state(&chip->chip.pwms[0], &state);
/* Re-enable the periph clock it was stopped during suspend. */
if (!state.enabled) {
ret = clk_prepare_enable(chip->hlcdc->periph_clk);
if (ret)
return ret;
}
return atmel_hlcdc_pwm_apply(&chip->chip, &chip->chip.pwms[0], &state);
}
#endif
static SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
static const struct of_device_id atmel_hlcdc_dt_ids[] = {
{
.compatible = "atmel,at91sam9n12-hlcdc",
/* 9n12 has same errata as 9x5 HLCDC PWM */
.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
},
{
.compatible = "atmel,at91sam9x5-hlcdc",
.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
},
{
.compatible = "atmel,sama5d2-hlcdc",
},
{
.compatible = "atmel,sama5d3-hlcdc",
.data = &atmel_hlcdc_pwm_sama5d3_errata,
},
{
.compatible = "atmel,sama5d4-hlcdc",
.data = &atmel_hlcdc_pwm_sama5d3_errata,
},
{ .compatible = "microchip,sam9x60-hlcdc", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, atmel_hlcdc_dt_ids);
static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct atmel_hlcdc_pwm *chip;
struct atmel_hlcdc *hlcdc;
int ret;
hlcdc = dev_get_drvdata(dev->parent);
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
ret = clk_prepare_enable(hlcdc->periph_clk);
if (ret)
return ret;
match = of_match_node(atmel_hlcdc_dt_ids, dev->parent->of_node);
if (match)
chip->errata = match->data;
chip->hlcdc = hlcdc;
chip->chip.ops = &atmel_hlcdc_pwm_ops;
chip->chip.dev = dev;
chip->chip.base = -1;
chip->chip.npwm = 1;
chip->chip.of_xlate = of_pwm_xlate_with_flags;
chip->chip.of_pwm_n_cells = 3;
ret = pwmchip_add_with_polarity(&chip->chip, PWM_POLARITY_INVERSED);
if (ret) {
clk_disable_unprepare(hlcdc->periph_clk);
return ret;
}
platform_set_drvdata(pdev, chip);
return 0;
}
static int atmel_hlcdc_pwm_remove(struct platform_device *pdev)
{
struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev);
int ret;
ret = pwmchip_remove(&chip->chip);
if (ret)
return ret;
clk_disable_unprepare(chip->hlcdc->periph_clk);
return 0;
}
static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = {
{ .compatible = "atmel,hlcdc-pwm" },
{ /* sentinel */ },
};
static struct platform_driver atmel_hlcdc_pwm_driver = {
.driver = {
.name = "atmel-hlcdc-pwm",
.of_match_table = atmel_hlcdc_pwm_dt_ids,
.pm = &atmel_hlcdc_pwm_pm_ops,
},
.probe = atmel_hlcdc_pwm_probe,
.remove = atmel_hlcdc_pwm_remove,
};
module_platform_driver(atmel_hlcdc_pwm_driver);
MODULE_ALIAS("platform:atmel-hlcdc-pwm");
MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
MODULE_DESCRIPTION("Atmel HLCDC PWM driver");
MODULE_LICENSE("GPL v2");