forked from Minki/linux
e8cd77e467
The use of flag ESDHC_FLAG_GPIO_FOR_CD_WP is all CD related. It does not necessarily need to bother WP in the flag name. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
381 lines
10 KiB
C
381 lines
10 KiB
C
/*
|
|
* Freescale eSDHC i.MX controller driver for the platform bus.
|
|
*
|
|
* derived from the OF-version.
|
|
*
|
|
* Copyright (c) 2010 Pengutronix e.K.
|
|
* Author: Wolfram Sang <w.sang@pengutronix.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sdio.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/esdhc.h>
|
|
#include "sdhci-pltfm.h"
|
|
#include "sdhci-esdhc.h"
|
|
|
|
/* VENDOR SPEC register */
|
|
#define SDHCI_VENDOR_SPEC 0xC0
|
|
#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
|
|
|
|
#define ESDHC_FLAG_GPIO_FOR_CD (1 << 0)
|
|
/*
|
|
* The CMDTYPE of the CMD register (offset 0xE) should be set to
|
|
* "11" when the STOP CMD12 is issued on imx53 to abort one
|
|
* open ended multi-blk IO. Otherwise the TC INT wouldn't
|
|
* be generated.
|
|
* In exact block transfer, the controller doesn't complete the
|
|
* operations automatically as required at the end of the
|
|
* transfer and remains on hold if the abort command is not sent.
|
|
* As a result, the TC flag is not asserted and SW received timeout
|
|
* exeception. Bit1 of Vendor Spec registor is used to fix it.
|
|
*/
|
|
#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)
|
|
|
|
struct pltfm_imx_data {
|
|
int flags;
|
|
u32 scratchpad;
|
|
};
|
|
|
|
static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
|
|
{
|
|
void __iomem *base = host->ioaddr + (reg & ~0x3);
|
|
u32 shift = (reg & 0x3) * 8;
|
|
|
|
writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
|
|
}
|
|
|
|
static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
|
|
/* fake CARD_PRESENT flag on mx25/35 */
|
|
u32 val = readl(host->ioaddr + reg);
|
|
|
|
if (unlikely((reg == SDHCI_PRESENT_STATE)
|
|
&& (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD))) {
|
|
struct esdhc_platform_data *boarddata =
|
|
host->mmc->parent->platform_data;
|
|
|
|
if (boarddata && gpio_is_valid(boarddata->cd_gpio)
|
|
&& gpio_get_value(boarddata->cd_gpio))
|
|
/* no card, if a valid gpio says so... */
|
|
val &= ~SDHCI_CARD_PRESENT;
|
|
else
|
|
/* ... in all other cases assume card is present */
|
|
val |= SDHCI_CARD_PRESENT;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
|
|
if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)
|
|
&& (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD)))
|
|
/*
|
|
* these interrupts won't work with a custom card_detect gpio
|
|
* (only applied to mx25/35)
|
|
*/
|
|
val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
|
|
|
|
if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
|
|
&& (reg == SDHCI_INT_STATUS)
|
|
&& (val & SDHCI_INT_DATA_END))) {
|
|
u32 v;
|
|
v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
|
|
writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
}
|
|
|
|
writel(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(reg == SDHCI_HOST_VERSION))
|
|
reg ^= 2;
|
|
|
|
return readw(host->ioaddr + reg);
|
|
}
|
|
|
|
static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
|
|
switch (reg) {
|
|
case SDHCI_TRANSFER_MODE:
|
|
/*
|
|
* Postpone this write, we must do it together with a
|
|
* command write that is down below.
|
|
*/
|
|
if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
|
|
&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
|
|
&& (host->cmd->data->blocks > 1)
|
|
&& (host->cmd->data->flags & MMC_DATA_READ)) {
|
|
u32 v;
|
|
v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
|
|
writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
}
|
|
imx_data->scratchpad = val;
|
|
return;
|
|
case SDHCI_COMMAND:
|
|
if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
|
|
&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
|
|
val |= SDHCI_CMD_ABORTCMD;
|
|
writel(val << 16 | imx_data->scratchpad,
|
|
host->ioaddr + SDHCI_TRANSFER_MODE);
|
|
return;
|
|
case SDHCI_BLOCK_SIZE:
|
|
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
|
|
break;
|
|
}
|
|
esdhc_clrset_le(host, 0xffff, val, reg);
|
|
}
|
|
|
|
static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
u32 new_val;
|
|
|
|
switch (reg) {
|
|
case SDHCI_POWER_CONTROL:
|
|
/*
|
|
* FSL put some DMA bits here
|
|
* If your board has a regulator, code should be here
|
|
*/
|
|
return;
|
|
case SDHCI_HOST_CONTROL:
|
|
/* FSL messed up here, so we can just keep those two */
|
|
new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
|
|
/* ensure the endianess */
|
|
new_val |= ESDHC_HOST_CONTROL_LE;
|
|
/* DMA mode bits are shifted */
|
|
new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
|
|
|
|
esdhc_clrset_le(host, 0xffff, new_val, reg);
|
|
return;
|
|
}
|
|
esdhc_clrset_le(host, 0xff, val, reg);
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_get_rate(pltfm_host->clk);
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_get_rate(pltfm_host->clk) / 256 / 16;
|
|
}
|
|
|
|
static struct sdhci_ops sdhci_esdhc_ops = {
|
|
.read_l = esdhc_readl_le,
|
|
.read_w = esdhc_readw_le,
|
|
.write_l = esdhc_writel_le,
|
|
.write_w = esdhc_writew_le,
|
|
.write_b = esdhc_writeb_le,
|
|
.set_clock = esdhc_set_clock,
|
|
.get_max_clock = esdhc_pltfm_get_max_clock,
|
|
.get_min_clock = esdhc_pltfm_get_min_clock,
|
|
};
|
|
|
|
static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
|
|
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA
|
|
| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
|
|
/* ADMA has issues. Might be fixable */
|
|
.ops = &sdhci_esdhc_ops,
|
|
};
|
|
|
|
static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
|
|
{
|
|
struct esdhc_platform_data *boarddata =
|
|
host->mmc->parent->platform_data;
|
|
|
|
if (boarddata && gpio_is_valid(boarddata->wp_gpio))
|
|
return gpio_get_value(boarddata->wp_gpio);
|
|
else
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static irqreturn_t cd_irq(int irq, void *data)
|
|
{
|
|
struct sdhci_host *sdhost = (struct sdhci_host *)data;
|
|
|
|
tasklet_schedule(&sdhost->card_tasklet);
|
|
return IRQ_HANDLED;
|
|
};
|
|
|
|
static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_host *host;
|
|
struct esdhc_platform_data *boarddata;
|
|
struct clk *clk;
|
|
int err;
|
|
struct pltfm_imx_data *imx_data;
|
|
|
|
host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata);
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
|
|
imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
|
|
if (!imx_data)
|
|
return -ENOMEM;
|
|
pltfm_host->priv = imx_data;
|
|
|
|
clk = clk_get(mmc_dev(host->mmc), NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(mmc_dev(host->mmc), "clk err\n");
|
|
err = PTR_ERR(clk);
|
|
goto err_clk_get;
|
|
}
|
|
clk_enable(clk);
|
|
pltfm_host->clk = clk;
|
|
|
|
if (!cpu_is_mx25())
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
|
|
|
|
if (cpu_is_mx25() || cpu_is_mx35()) {
|
|
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
|
|
host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
|
|
/* write_protect can't be routed to controller, use gpio */
|
|
sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro;
|
|
}
|
|
|
|
if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51()))
|
|
imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
|
|
|
|
boarddata = host->mmc->parent->platform_data;
|
|
if (boarddata) {
|
|
err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
|
|
if (err) {
|
|
dev_warn(mmc_dev(host->mmc),
|
|
"no write-protect pin available!\n");
|
|
boarddata->wp_gpio = err;
|
|
}
|
|
|
|
err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
|
|
if (err) {
|
|
dev_warn(mmc_dev(host->mmc),
|
|
"no card-detect pin available!\n");
|
|
goto no_card_detect_pin;
|
|
}
|
|
|
|
/* i.MX5x has issues to be researched */
|
|
if (!cpu_is_mx25() && !cpu_is_mx35())
|
|
goto not_supported;
|
|
|
|
err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
mmc_hostname(host->mmc), host);
|
|
if (err) {
|
|
dev_warn(mmc_dev(host->mmc), "request irq error\n");
|
|
goto no_card_detect_irq;
|
|
}
|
|
|
|
imx_data->flags |= ESDHC_FLAG_GPIO_FOR_CD;
|
|
/* Now we have a working card_detect again */
|
|
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
}
|
|
|
|
err = sdhci_add_host(host);
|
|
if (err)
|
|
goto err_add_host;
|
|
|
|
return 0;
|
|
|
|
no_card_detect_irq:
|
|
gpio_free(boarddata->cd_gpio);
|
|
no_card_detect_pin:
|
|
boarddata->cd_gpio = err;
|
|
not_supported:
|
|
kfree(imx_data);
|
|
err_add_host:
|
|
clk_disable(pltfm_host->clk);
|
|
clk_put(pltfm_host->clk);
|
|
err_clk_get:
|
|
sdhci_pltfm_free(pdev);
|
|
return err;
|
|
}
|
|
|
|
static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
|
|
|
|
sdhci_remove_host(host, dead);
|
|
|
|
if (boarddata && gpio_is_valid(boarddata->wp_gpio))
|
|
gpio_free(boarddata->wp_gpio);
|
|
|
|
if (boarddata && gpio_is_valid(boarddata->cd_gpio)) {
|
|
gpio_free(boarddata->cd_gpio);
|
|
|
|
if (!(host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION))
|
|
free_irq(gpio_to_irq(boarddata->cd_gpio), host);
|
|
}
|
|
|
|
clk_disable(pltfm_host->clk);
|
|
clk_put(pltfm_host->clk);
|
|
kfree(imx_data);
|
|
|
|
sdhci_pltfm_free(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sdhci_esdhc_imx_driver = {
|
|
.driver = {
|
|
.name = "sdhci-esdhc-imx",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = sdhci_esdhc_imx_probe,
|
|
.remove = __devexit_p(sdhci_esdhc_imx_remove),
|
|
#ifdef CONFIG_PM
|
|
.suspend = sdhci_pltfm_suspend,
|
|
.resume = sdhci_pltfm_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init sdhci_esdhc_imx_init(void)
|
|
{
|
|
return platform_driver_register(&sdhci_esdhc_imx_driver);
|
|
}
|
|
module_init(sdhci_esdhc_imx_init);
|
|
|
|
static void __exit sdhci_esdhc_imx_exit(void)
|
|
{
|
|
platform_driver_unregister(&sdhci_esdhc_imx_driver);
|
|
}
|
|
module_exit(sdhci_esdhc_imx_exit);
|
|
|
|
MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
|
|
MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|