forked from Minki/linux
b229cf92ee
Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
423 lines
11 KiB
C
423 lines
11 KiB
C
|
|
/******************************************************************************
|
|
*
|
|
* Module Name: hwgpe - Low level GPE enable/disable/clear functions
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/*
|
|
* Copyright (C) 2000 - 2006, R. Byron Moore
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*/
|
|
|
|
#include <acpi/acpi.h>
|
|
#include <acpi/acevents.h>
|
|
|
|
#define _COMPONENT ACPI_HARDWARE
|
|
ACPI_MODULE_NAME("hwgpe")
|
|
|
|
/* Local prototypes */
|
|
static acpi_status
|
|
acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
|
|
struct acpi_gpe_block_info *gpe_block);
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_write_gpe_enable_reg
|
|
*
|
|
* PARAMETERS: gpe_event_info - Info block for the GPE to be enabled
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Write a GPE enable register. Note: The bit for this GPE must
|
|
* already be cleared or set in the parent register
|
|
* enable_for_run mask.
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status
|
|
acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info)
|
|
{
|
|
struct acpi_gpe_register_info *gpe_register_info;
|
|
acpi_status status;
|
|
|
|
ACPI_FUNCTION_ENTRY();
|
|
|
|
/* Get the info block for the entire GPE register */
|
|
|
|
gpe_register_info = gpe_event_info->register_info;
|
|
if (!gpe_register_info) {
|
|
return (AE_NOT_EXIST);
|
|
}
|
|
|
|
/* Write the entire GPE (runtime) enable register */
|
|
|
|
status = acpi_hw_low_level_write(8, gpe_register_info->enable_for_run,
|
|
&gpe_register_info->enable_address);
|
|
|
|
return (status);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_clear_gpe
|
|
*
|
|
* PARAMETERS: gpe_event_info - Info block for the GPE to be cleared
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Clear the status bit for a single GPE.
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
|
|
{
|
|
acpi_status status;
|
|
|
|
ACPI_FUNCTION_ENTRY();
|
|
|
|
/*
|
|
* Write a one to the appropriate bit in the status register to
|
|
* clear this GPE.
|
|
*/
|
|
status = acpi_hw_low_level_write(8, gpe_event_info->register_bit,
|
|
&gpe_event_info->register_info->
|
|
status_address);
|
|
|
|
return (status);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_get_gpe_status
|
|
*
|
|
* PARAMETERS: gpe_event_info - Info block for the GPE to queried
|
|
* event_status - Where the GPE status is returned
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Return the status of a single GPE.
|
|
*
|
|
******************************************************************************/
|
|
|
|
#ifdef ACPI_FUTURE_USAGE
|
|
acpi_status
|
|
acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
|
|
acpi_event_status * event_status)
|
|
{
|
|
u32 in_byte;
|
|
u8 register_bit;
|
|
struct acpi_gpe_register_info *gpe_register_info;
|
|
acpi_status status;
|
|
acpi_event_status local_event_status = 0;
|
|
|
|
ACPI_FUNCTION_ENTRY();
|
|
|
|
if (!event_status) {
|
|
return (AE_BAD_PARAMETER);
|
|
}
|
|
|
|
/* Get the info block for the entire GPE register */
|
|
|
|
gpe_register_info = gpe_event_info->register_info;
|
|
|
|
/* Get the register bitmask for this GPE */
|
|
|
|
register_bit = gpe_event_info->register_bit;
|
|
|
|
/* GPE currently enabled? (enabled for runtime?) */
|
|
|
|
if (register_bit & gpe_register_info->enable_for_run) {
|
|
local_event_status |= ACPI_EVENT_FLAG_ENABLED;
|
|
}
|
|
|
|
/* GPE enabled for wake? */
|
|
|
|
if (register_bit & gpe_register_info->enable_for_wake) {
|
|
local_event_status |= ACPI_EVENT_FLAG_WAKE_ENABLED;
|
|
}
|
|
|
|
/* GPE currently active (status bit == 1)? */
|
|
|
|
status =
|
|
acpi_hw_low_level_read(8, &in_byte,
|
|
&gpe_register_info->status_address);
|
|
if (ACPI_FAILURE(status)) {
|
|
goto unlock_and_exit;
|
|
}
|
|
|
|
if (register_bit & in_byte) {
|
|
local_event_status |= ACPI_EVENT_FLAG_SET;
|
|
}
|
|
|
|
/* Set return value */
|
|
|
|
(*event_status) = local_event_status;
|
|
|
|
unlock_and_exit:
|
|
return (status);
|
|
}
|
|
#endif /* ACPI_FUTURE_USAGE */
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_disable_gpe_block
|
|
*
|
|
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
|
|
* gpe_block - Gpe Block info
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Disable all GPEs within a single GPE block
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status
|
|
acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info * gpe_xrupt_info,
|
|
struct acpi_gpe_block_info * gpe_block)
|
|
{
|
|
u32 i;
|
|
acpi_status status;
|
|
|
|
/* Examine each GPE Register within the block */
|
|
|
|
for (i = 0; i < gpe_block->register_count; i++) {
|
|
|
|
/* Disable all GPEs in this register */
|
|
|
|
status = acpi_hw_low_level_write(8, 0x00,
|
|
&gpe_block->register_info[i].
|
|
enable_address);
|
|
if (ACPI_FAILURE(status)) {
|
|
return (status);
|
|
}
|
|
}
|
|
|
|
return (AE_OK);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_clear_gpe_block
|
|
*
|
|
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
|
|
* gpe_block - Gpe Block info
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Clear status bits for all GPEs within a single GPE block
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status
|
|
acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info * gpe_xrupt_info,
|
|
struct acpi_gpe_block_info * gpe_block)
|
|
{
|
|
u32 i;
|
|
acpi_status status;
|
|
|
|
/* Examine each GPE Register within the block */
|
|
|
|
for (i = 0; i < gpe_block->register_count; i++) {
|
|
|
|
/* Clear status on all GPEs in this register */
|
|
|
|
status = acpi_hw_low_level_write(8, 0xFF,
|
|
&gpe_block->register_info[i].
|
|
status_address);
|
|
if (ACPI_FAILURE(status)) {
|
|
return (status);
|
|
}
|
|
}
|
|
|
|
return (AE_OK);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_enable_runtime_gpe_block
|
|
*
|
|
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
|
|
* gpe_block - Gpe Block info
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes
|
|
* combination wake/run GPEs.
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status
|
|
acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info * gpe_xrupt_info,
|
|
struct acpi_gpe_block_info * gpe_block)
|
|
{
|
|
u32 i;
|
|
acpi_status status;
|
|
|
|
/* NOTE: assumes that all GPEs are currently disabled */
|
|
|
|
/* Examine each GPE Register within the block */
|
|
|
|
for (i = 0; i < gpe_block->register_count; i++) {
|
|
if (!gpe_block->register_info[i].enable_for_run) {
|
|
continue;
|
|
}
|
|
|
|
/* Enable all "runtime" GPEs in this register */
|
|
|
|
status =
|
|
acpi_hw_low_level_write(8,
|
|
gpe_block->register_info[i].
|
|
enable_for_run,
|
|
&gpe_block->register_info[i].
|
|
enable_address);
|
|
if (ACPI_FAILURE(status)) {
|
|
return (status);
|
|
}
|
|
}
|
|
|
|
return (AE_OK);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_enable_wakeup_gpe_block
|
|
*
|
|
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
|
|
* gpe_block - Gpe Block info
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes
|
|
* combination wake/run GPEs.
|
|
*
|
|
******************************************************************************/
|
|
|
|
static acpi_status
|
|
acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
|
|
struct acpi_gpe_block_info *gpe_block)
|
|
{
|
|
u32 i;
|
|
acpi_status status;
|
|
|
|
/* Examine each GPE Register within the block */
|
|
|
|
for (i = 0; i < gpe_block->register_count; i++) {
|
|
if (!gpe_block->register_info[i].enable_for_wake) {
|
|
continue;
|
|
}
|
|
|
|
/* Enable all "wake" GPEs in this register */
|
|
|
|
status = acpi_hw_low_level_write(8,
|
|
gpe_block->register_info[i].
|
|
enable_for_wake,
|
|
&gpe_block->register_info[i].
|
|
enable_address);
|
|
if (ACPI_FAILURE(status)) {
|
|
return (status);
|
|
}
|
|
}
|
|
|
|
return (AE_OK);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_disable_all_gpes
|
|
*
|
|
* PARAMETERS: None
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Disable and clear all GPEs in all GPE blocks
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status acpi_hw_disable_all_gpes(void)
|
|
{
|
|
acpi_status status;
|
|
|
|
ACPI_FUNCTION_TRACE(hw_disable_all_gpes);
|
|
|
|
status = acpi_ev_walk_gpe_list(acpi_hw_disable_gpe_block);
|
|
status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block);
|
|
return_ACPI_STATUS(status);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_enable_all_runtime_gpes
|
|
*
|
|
* PARAMETERS: None
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status acpi_hw_enable_all_runtime_gpes(void)
|
|
{
|
|
acpi_status status;
|
|
|
|
ACPI_FUNCTION_TRACE(hw_enable_all_runtime_gpes);
|
|
|
|
status = acpi_ev_walk_gpe_list(acpi_hw_enable_runtime_gpe_block);
|
|
return_ACPI_STATUS(status);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_hw_enable_all_wakeup_gpes
|
|
*
|
|
* PARAMETERS: None
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status acpi_hw_enable_all_wakeup_gpes(void)
|
|
{
|
|
acpi_status status;
|
|
|
|
ACPI_FUNCTION_TRACE(hw_enable_all_wakeup_gpes);
|
|
|
|
status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block);
|
|
return_ACPI_STATUS(status);
|
|
}
|