forked from Minki/linux
0ba4034e20
The usb-serial core no longer checks these fields so remove them from all of the individual drivers. They will be removed from the usb-serial core in a patch later in the series. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
484 lines
12 KiB
C
484 lines
12 KiB
C
/*
|
|
* Copyright (C) 2006
|
|
* Simon Schulz (ark3116_driver <at> auctionant.de)
|
|
*
|
|
* ark3116
|
|
* - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
|
|
* productid=0x0232) (used in a datacable called KQ-U8A)
|
|
*
|
|
* - based on code by krisfx -> thanks !!
|
|
* (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
|
|
*
|
|
* - based on logs created by usbsnoopy
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/serial.h>
|
|
#include <linux/serial.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
|
|
static int debug;
|
|
|
|
static struct usb_device_id id_table [] = {
|
|
{ USB_DEVICE(0x6547, 0x0232) },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, id_table);
|
|
|
|
struct ark3116_private {
|
|
spinlock_t lock;
|
|
u8 termios_initialized;
|
|
};
|
|
|
|
static inline void ARK3116_SND(struct usb_serial *serial, int seq,
|
|
__u8 request, __u8 requesttype,
|
|
__u16 value, __u16 index)
|
|
{
|
|
int result;
|
|
result = usb_control_msg(serial->dev,
|
|
usb_sndctrlpipe(serial->dev, 0),
|
|
request, requesttype, value, index,
|
|
NULL, 0x00, 1000);
|
|
dbg("%03d > ok", seq);
|
|
}
|
|
|
|
static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
|
|
__u8 request, __u8 requesttype,
|
|
__u16 value, __u16 index, __u8 expected,
|
|
char *buf)
|
|
{
|
|
int result;
|
|
result = usb_control_msg(serial->dev,
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
request, requesttype, value, index,
|
|
buf, 0x0000001, 1000);
|
|
if (result)
|
|
dbg("%03d < %d bytes [0x%02X]", seq, result,
|
|
((unsigned char *)buf)[0]);
|
|
else
|
|
dbg("%03d < 0 bytes", seq);
|
|
}
|
|
|
|
static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
|
|
__u8 request, __u8 requesttype,
|
|
__u16 value, __u16 index, char *buf)
|
|
{
|
|
usb_control_msg(serial->dev,
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
request, requesttype, value, index,
|
|
buf, 0x0000001, 1000);
|
|
}
|
|
|
|
static int ark3116_attach(struct usb_serial *serial)
|
|
{
|
|
char *buf;
|
|
struct ark3116_private *priv;
|
|
int i;
|
|
|
|
for (i = 0; i < serial->num_ports; ++i) {
|
|
priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
|
|
if (!priv)
|
|
goto cleanup;
|
|
spin_lock_init(&priv->lock);
|
|
|
|
usb_set_serial_port_data(serial->port[i], priv);
|
|
}
|
|
|
|
buf = kmalloc(1, GFP_KERNEL);
|
|
if (!buf) {
|
|
dbg("error kmalloc -> out of mem?");
|
|
goto cleanup;
|
|
}
|
|
|
|
/* 3 */
|
|
ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002);
|
|
ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001);
|
|
ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008);
|
|
ARK3116_SND(serial, 6, 0xFE, 0x40, 0x0000, 0x000B);
|
|
|
|
/* <-- seq7 */
|
|
ARK3116_RCV(serial, 7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
|
|
ARK3116_SND(serial, 8, 0xFE, 0x40, 0x0080, 0x0003);
|
|
ARK3116_SND(serial, 9, 0xFE, 0x40, 0x001A, 0x0000);
|
|
ARK3116_SND(serial, 10, 0xFE, 0x40, 0x0000, 0x0001);
|
|
ARK3116_SND(serial, 11, 0xFE, 0x40, 0x0000, 0x0003);
|
|
|
|
/* <-- seq12 */
|
|
ARK3116_RCV(serial, 12, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
|
|
ARK3116_SND(serial, 13, 0xFE, 0x40, 0x0000, 0x0004);
|
|
|
|
/* 14 */
|
|
ARK3116_RCV(serial, 14, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
|
|
ARK3116_SND(serial, 15, 0xFE, 0x40, 0x0000, 0x0004);
|
|
|
|
/* 16 */
|
|
ARK3116_RCV(serial, 16, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
|
|
/* --> seq17 */
|
|
ARK3116_SND(serial, 17, 0xFE, 0x40, 0x0001, 0x0004);
|
|
|
|
/* <-- seq18 */
|
|
ARK3116_RCV(serial, 18, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
|
|
|
|
/* --> seq19 */
|
|
ARK3116_SND(serial, 19, 0xFE, 0x40, 0x0003, 0x0004);
|
|
|
|
/* <-- seq20 */
|
|
/* seems like serial port status info (RTS, CTS, ...) */
|
|
/* returns modem control line status?! */
|
|
ARK3116_RCV(serial, 20, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
|
|
|
|
/* set 9600 baud & do some init?! */
|
|
ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
|
|
ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000);
|
|
ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001);
|
|
ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
|
|
ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
|
|
ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
|
|
ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
|
|
ARK3116_SND(serial, 154, 0xFE, 0x40, 0x0003, 0x0003);
|
|
|
|
kfree(buf);
|
|
return 0;
|
|
|
|
cleanup:
|
|
for (--i; i >= 0; --i) {
|
|
kfree(usb_get_serial_port_data(serial->port[i]));
|
|
usb_set_serial_port_data(serial->port[i], NULL);
|
|
}
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void ark3116_set_termios(struct usb_serial_port *port,
|
|
struct ktermios *old_termios)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
struct ark3116_private *priv = usb_get_serial_port_data(port);
|
|
struct ktermios *termios = port->tty->termios;
|
|
unsigned int cflag = termios->c_cflag;
|
|
unsigned long flags;
|
|
int baud;
|
|
int ark3116_baud;
|
|
char *buf;
|
|
char config;
|
|
|
|
config = 0;
|
|
|
|
dbg("%s - port %d", __FUNCTION__, port->number);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (!priv->termios_initialized) {
|
|
*(port->tty->termios) = tty_std_termios;
|
|
port->tty->termios->c_cflag = B9600 | CS8
|
|
| CREAD | HUPCL | CLOCAL;
|
|
termios->c_ispeed = 9600;
|
|
termios->c_ospeed = 9600;
|
|
priv->termios_initialized = 1;
|
|
}
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
cflag = termios->c_cflag;
|
|
termios->c_cflag &= ~(CMSPAR|CRTSCTS);
|
|
|
|
buf = kmalloc(1, GFP_KERNEL);
|
|
if (!buf) {
|
|
dbg("error kmalloc");
|
|
return;
|
|
}
|
|
|
|
/* set data bit count (8/7/6/5) */
|
|
if (cflag & CSIZE) {
|
|
switch (cflag & CSIZE) {
|
|
case CS5:
|
|
config |= 0x00;
|
|
dbg("setting CS5");
|
|
break;
|
|
case CS6:
|
|
config |= 0x01;
|
|
dbg("setting CS6");
|
|
break;
|
|
case CS7:
|
|
config |= 0x02;
|
|
dbg("setting CS7");
|
|
break;
|
|
default:
|
|
dbg("CSIZE was set but not CS5-CS8, using CS8!");
|
|
/* fall through */
|
|
case CS8:
|
|
config |= 0x03;
|
|
dbg("setting CS8");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* set parity (NONE/EVEN/ODD) */
|
|
if (cflag & PARENB) {
|
|
if (cflag & PARODD) {
|
|
config |= 0x08;
|
|
dbg("setting parity to ODD");
|
|
} else {
|
|
config |= 0x18;
|
|
dbg("setting parity to EVEN");
|
|
}
|
|
} else {
|
|
dbg("setting parity to NONE");
|
|
}
|
|
|
|
/* set stop bit (1/2) */
|
|
if (cflag & CSTOPB) {
|
|
config |= 0x04;
|
|
dbg("setting 2 stop bits");
|
|
} else {
|
|
dbg("setting 1 stop bit");
|
|
}
|
|
|
|
/* set baudrate */
|
|
baud = tty_get_baud_rate(port->tty);
|
|
|
|
switch (baud) {
|
|
case 75:
|
|
case 150:
|
|
case 300:
|
|
case 600:
|
|
case 1200:
|
|
case 1800:
|
|
case 2400:
|
|
case 4800:
|
|
case 9600:
|
|
case 19200:
|
|
case 38400:
|
|
case 57600:
|
|
case 115200:
|
|
case 230400:
|
|
case 460800:
|
|
/* Report the resulting rate back to the caller */
|
|
tty_encode_baud_rate(port->tty, baud, baud);
|
|
break;
|
|
/* set 9600 as default (if given baudrate is invalid for example) */
|
|
default:
|
|
tty_encode_baud_rate(port->tty, 9600, 9600);
|
|
case 0:
|
|
baud = 9600;
|
|
}
|
|
|
|
/*
|
|
* found by try'n'error, be careful, maybe there are other options
|
|
* for multiplicator etc! (3.5 for example)
|
|
*/
|
|
if (baud == 460800)
|
|
/* strange, for 460800 the formula is wrong
|
|
* if using round() then 9600baud is wrong) */
|
|
ark3116_baud = 7;
|
|
else
|
|
ark3116_baud = 3000000 / baud;
|
|
|
|
/* ? */
|
|
ARK3116_RCV(serial, 0, 0xFE, 0xC0, 0x0000, 0x0003, 0x03, buf);
|
|
|
|
/* offset = buf[0]; */
|
|
/* offset = 0x03; */
|
|
/* dbg("using 0x%04X as target for 0x0003:", 0x0080 + offset); */
|
|
|
|
/* set baudrate */
|
|
dbg("setting baudrate to %d (->reg=%d)", baud, ark3116_baud);
|
|
ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
|
|
ARK3116_SND(serial, 148, 0xFE, 0x40,
|
|
(ark3116_baud & 0x00FF), 0x0000);
|
|
ARK3116_SND(serial, 149, 0xFE, 0x40,
|
|
(ark3116_baud & 0xFF00) >> 8, 0x0001);
|
|
ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
|
|
|
|
/* ? */
|
|
ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
|
|
ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
|
|
|
|
/* set data bit count, stop bit count & parity: */
|
|
dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
|
|
ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
|
|
ARK3116_SND(serial, 154, 0xFE, 0x40, config, 0x0003);
|
|
|
|
if (cflag & CRTSCTS)
|
|
dbg("CRTSCTS not supported by chipset?!");
|
|
|
|
/* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */
|
|
|
|
kfree(buf);
|
|
|
|
return;
|
|
}
|
|
|
|
static int ark3116_open(struct usb_serial_port *port, struct file *filp)
|
|
{
|
|
struct ktermios tmp_termios;
|
|
struct usb_serial *serial = port->serial;
|
|
char *buf;
|
|
int result = 0;
|
|
|
|
dbg("%s - port %d", __FUNCTION__, port->number);
|
|
|
|
buf = kmalloc(1, GFP_KERNEL);
|
|
if (!buf) {
|
|
dbg("error kmalloc -> out of mem?");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
result = usb_serial_generic_open(port, filp);
|
|
if (result)
|
|
goto err_out;
|
|
|
|
/* open */
|
|
ARK3116_RCV(serial, 111, 0xFE, 0xC0, 0x0000, 0x0003, 0x02, buf);
|
|
|
|
ARK3116_SND(serial, 112, 0xFE, 0x40, 0x0082, 0x0003);
|
|
ARK3116_SND(serial, 113, 0xFE, 0x40, 0x001A, 0x0000);
|
|
ARK3116_SND(serial, 114, 0xFE, 0x40, 0x0000, 0x0001);
|
|
ARK3116_SND(serial, 115, 0xFE, 0x40, 0x0002, 0x0003);
|
|
|
|
ARK3116_RCV(serial, 116, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
|
|
ARK3116_SND(serial, 117, 0xFE, 0x40, 0x0002, 0x0004);
|
|
|
|
ARK3116_RCV(serial, 118, 0xFE, 0xC0, 0x0000, 0x0004, 0x02, buf);
|
|
ARK3116_SND(serial, 119, 0xFE, 0x40, 0x0000, 0x0004);
|
|
|
|
ARK3116_RCV(serial, 120, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
|
|
|
|
ARK3116_SND(serial, 121, 0xFE, 0x40, 0x0001, 0x0004);
|
|
|
|
ARK3116_RCV(serial, 122, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
|
|
|
|
ARK3116_SND(serial, 123, 0xFE, 0x40, 0x0003, 0x0004);
|
|
|
|
/* returns different values (control lines?!) */
|
|
ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
|
|
|
|
/* initialise termios */
|
|
if (port->tty)
|
|
ark3116_set_termios(port, &tmp_termios);
|
|
|
|
err_out:
|
|
kfree(buf);
|
|
|
|
return result;
|
|
}
|
|
|
|
static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct serial_struct serstruct;
|
|
void __user *user_arg = (void __user *)arg;
|
|
|
|
switch (cmd) {
|
|
case TIOCGSERIAL:
|
|
/* XXX: Some of these values are probably wrong. */
|
|
memset(&serstruct, 0, sizeof (serstruct));
|
|
serstruct.type = PORT_16654;
|
|
serstruct.line = port->serial->minor;
|
|
serstruct.port = port->number;
|
|
serstruct.custom_divisor = 0;
|
|
serstruct.baud_base = 460800;
|
|
|
|
if (copy_to_user(user_arg, &serstruct, sizeof (serstruct)))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
case TIOCSSERIAL:
|
|
if (copy_from_user(&serstruct, user_arg, sizeof (serstruct)))
|
|
return -EFAULT;
|
|
return 0;
|
|
default:
|
|
dbg("%s cmd 0x%04x not supported", __FUNCTION__, cmd);
|
|
break;
|
|
}
|
|
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
char *buf;
|
|
char temp;
|
|
|
|
/* seems like serial port status info (RTS, CTS, ...) is stored
|
|
* in reg(?) 0x0006
|
|
* pcb connection point 11 = GND -> sets bit4 of response
|
|
* pcb connection point 7 = GND -> sets bit6 of response
|
|
*/
|
|
|
|
buf = kmalloc(1, GFP_KERNEL);
|
|
if (!buf) {
|
|
dbg("error kmalloc");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* read register */
|
|
ARK3116_RCV_QUIET(serial, 0xFE, 0xC0, 0x0000, 0x0006, buf);
|
|
temp = buf[0];
|
|
kfree(buf);
|
|
|
|
/* i do not really know if bit4=CTS and bit6=DSR... just a
|
|
* quick guess!
|
|
*/
|
|
return (temp & (1<<4) ? TIOCM_CTS : 0)
|
|
| (temp & (1<<6) ? TIOCM_DSR : 0);
|
|
}
|
|
|
|
static struct usb_driver ark3116_driver = {
|
|
.name = "ark3116",
|
|
.probe = usb_serial_probe,
|
|
.disconnect = usb_serial_disconnect,
|
|
.id_table = id_table,
|
|
.no_dynamic_id = 1,
|
|
};
|
|
|
|
static struct usb_serial_driver ark3116_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "ark3116",
|
|
},
|
|
.id_table = id_table,
|
|
.usb_driver = &ark3116_driver,
|
|
.num_ports = 1,
|
|
.attach = ark3116_attach,
|
|
.set_termios = ark3116_set_termios,
|
|
.ioctl = ark3116_ioctl,
|
|
.tiocmget = ark3116_tiocmget,
|
|
.open = ark3116_open,
|
|
};
|
|
|
|
static int __init ark3116_init(void)
|
|
{
|
|
int retval;
|
|
|
|
retval = usb_serial_register(&ark3116_device);
|
|
if (retval)
|
|
return retval;
|
|
retval = usb_register(&ark3116_driver);
|
|
if (retval)
|
|
usb_serial_deregister(&ark3116_device);
|
|
return retval;
|
|
}
|
|
|
|
static void __exit ark3116_exit(void)
|
|
{
|
|
usb_deregister(&ark3116_driver);
|
|
usb_serial_deregister(&ark3116_device);
|
|
}
|
|
|
|
module_init(ark3116_init);
|
|
module_exit(ark3116_exit);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug enabled or not");
|
|
|