* R-Mobile A1 (r8a7740) SoC
- Describe CEU, IRQC, SYS-DMAC and USB devices
- Cleanup for consistency with other Renesas SoCs and enhanced maintainability
+ Stop grouping clocks under a "clocks" subnode
+ Add soc node
+ Sort subnodes of root and soc nodes
* RZ/A1H (r7s72100) SoC
- Describe CEU device
* R-Car Gen2, RZ/G1 and RZ/A1H SoCs
- Add PMU device nodes
Geert Uytterhoeven says: "This patch series enables support for the ARM
Performance Monitor Units in Cortex-A7, Cortex-A9, and Cortex-A15 CPU
cores on Renesas RZ/A1, R-Car Gen2, and RZ/G1 SoCs. This allows for
better performance analysis using the "perf" tool."
* RZ/A1H (r7s72100) SoC
- Correct interrupt types
Geert Uytterhoeven says "RZ/A1H peripherals use a mix of level and edge
interrupts.
This patch series corrects the interrupt types for watchdog and RTC from
edge to level, to match the datasheet."
* R-Mobile APE6 (r8a73a4) APE4EVM board and SH-Mobile AG5 (sh73a0) SoC
- Use generic disable-wp instead of now deprecated
toshiba,mmc-wrprotect-disable property
* EMMA Mobile EV2 (emev2) and SH-Mobile AG5 (sh73a0) SoCs
- Add missing interrupt-affinity to PMU
Geert Uytterhoeven says "The Cortex-A9 PMU nodes on SH-Mobile AG5 and
Emma Mobile EV2 reference two interrupts, but lack interrupt-affinity
properties, leading to:
hw perfevents: no interrupt-affinity property for /pmu, guessing.
This series adds the missing properties to fix this."
* R-Car H2 (r8a7790) and R-Mobile APE6 (r8a73a4) SoCs
- Correct mask for GIC PPI interrupts
Geert Uytterhoeven says "R-Car H2 and R-Mobile APE6 contain four
Cortex-A15 and four Cortex-A7 cores, hence the second interrupt
specifier cell for Private Peripheral Interrupts should use
"GIC_CPU_MASK_SIMPLE(8)", to make sure interrupts can be delivered to
all 8 processor cores.
This brings the predecessors of R-Car Gen3 in line with what we're
doing on other big.LITTLE SoCs, like R-Car H3 and M3-W."
* Alt board for R-Car E2 (r8a7794) SoC
* RBoards for -Car Gen2 SoCs and kzm9d board for EMMA Mobile EV2 (emev2) SoC
- Drop unnecessary address properties from VIN port nodes
These are unnecessary as the nodes to not have bus addresses.
* R-Car H2 (r8a7790), M2-W (r8a7791), M2-N (r8a7793) and E2 (r8a7794) SoCs
- Describe FDP1 instances
* iW-RainboW-G23S board for RZ/G1C (r8a77470) SoC
- Initial SoC and board support
- Enable EtherAVB
- Describe all SCIF devices
* Boards for R-Car Gen2 SoCs
- Enable watchdog support
Geert Uytterhoeven says "This patch series enables the builtin watchdog
timer on R-Car Gen2 SoCs on all supported boards, and builds on top of
Fabrizio's "[RFC v4 00/26] Fix watchdog on Renesas R-Car Gen2 and
RZ/G1"."
* R-Car Gen2 and RZ/G1 SoCs
- Describe watchdog devices
- For R-Car Gen2 this involves updating the SMP routine side as
it is changed by a driver updated to allow watchdog device support
* Wheat board for V2H (r8a7792) SoC
- Correct ADV7513 address usage
Kieran Bingham says "The r8a7792 Wheat board has two ADV7513 devices
sharing a single I2C bus, however in low power mode the ADV7513 will
reset it's slave maps to use the hardware defined default addresses.
The ADV7511 driver was adapted to allow the two devices to be
registered correctly - but it did not take into account the fault
whereby the devices reset the addresses.
This results in an address conflict between the device using the
default addresses, and the other device if it is in low-power-mode.
Repair this issue by moving both devices away from the default address
definitions."
-----BEGIN PGP SIGNATURE-----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=LV2P
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late
Renesas ARM Based SoC DT Updates for v4.18
* R-Mobile A1 (r8a7740) SoC
- Describe CEU, IRQC, SYS-DMAC and USB devices
- Cleanup for consistency with other Renesas SoCs and enhanced maintainability
* RZ/A1H (r7s72100) SoC
- Describe CEU device
* R-Car Gen2, RZ/G1 and RZ/A1H SoCs
- Add PMU device nodes
* RZ/A1H (r7s72100) SoC
- Correct interrupt types
* R-Mobile APE6 (r8a73a4) APE4EVM board and SH-Mobile AG5 (sh73a0) SoC
- Use generic disable-wp instead of now deprecated
toshiba,mmc-wrprotect-disable property
* EMMA Mobile EV2 (emev2) and SH-Mobile AG5 (sh73a0) SoCs
- Add missing interrupt-affinity to PMU
* R-Car H2 (r8a7790) and R-Mobile APE6 (r8a73a4) SoCs
- Correct mask for GIC PPI interrupts
* R-Car H2 (r8a7790), M2-W (r8a7791), M2-N (r8a7793) and E2 (r8a7794) SoCs
- Describe FDP1 instances
* R-Car Gen2 and RZ/G1 SoCs
- Describe watchdog devices
- For R-Car Gen2 this involves updating the SMP routine side as
it is changed by a driver updated to allow watchdog device support
* Alt board for R-Car E2 (r8a7794) SoC
* RBoards for -Car Gen2 SoCs and kzm9d board for EMMA Mobile EV2 (emev2) SoC
* iW-RainboW-G23S board for RZ/G1C (r8a77470) SoC
- Initial SoC and board support
- Enable EtherAVB
- Describe all SCIF devices
* Boards for R-Car Gen2 SoCs
- Enable watchdog support
* Wheat board for V2H (r8a7792) SoC
- Correct ADV7513 address usage
* tag 'renesas-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (69 commits)
ARM: dts: r8a7740: Add CEU1
ARM: dts: r8a7740: Add CEU0
ARM: dts: r8a7745: Add PMU device node
ARM: dts: r8a7743: Add PMU device node
ARM: dts: r8a7794: Add PMU device node
ARM: dts: r8a7793: Add PMU device node
ARM: dts: r8a7792: Add PMU device node
ARM: dts: r8a7791: Add PMU device node
ARM: dts: r8a7790: Add PMU device nodes
ARM: dts: r7s72100: Add PMU device node
ARM: dts: r7s72100: Correct RTC interrupt types
ARM: dts: r7s72100: Correct watchdog timer interrupt type
ARM: dts: emev2: Add missing interrupt-affinity to PMU node
ARM: dts: sh73a0: Add missing interrupt-affinity to PMU node
ARM: dts: r8a73a4: Correct mask for GIC PPI interrupts
ARM: dts: r8a7790: Correct mask for GIC PPI interrupts
ARM: shmobile: r8a7794: alt: add EEPROM to DTS
ARM: dts: kzm9d: Drop unnecessary address properties from gpio_keys node
ARM: dts: silk: Drop unnecessary address properties from vin port node
ARM: dts: alt: Drop unnecessary address properties from vin port node
...
Signed-off-by: Olof Johansson <olof@lixom.net>
14321604c8