forked from Minki/linux
7755313e69
Backlights are generally a subtype of LEDs at least from a software point of view if not always electrically. Move the bindings from the video directory to underneath the leds dir. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org>
71 lines
1.6 KiB
Plaintext
71 lines
1.6 KiB
Plaintext
lp855x bindings
|
|
|
|
Required properties:
|
|
- compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
|
|
"ti,lp8555", "ti,lp8556", "ti,lp8557"
|
|
- reg: I2C slave address (u8)
|
|
- dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
|
|
|
|
Optional properties:
|
|
- bl-name: Backlight device name (string)
|
|
- init-brt: Initial value of backlight brightness (u8)
|
|
- pwm-period: PWM period value. Set only PWM input mode used (u32)
|
|
- rom-addr: Register address of ROM area to be updated (u8)
|
|
- rom-val: Register value to be updated (u8)
|
|
- power-supply: Regulator which controls the 3V rail
|
|
|
|
Example:
|
|
|
|
/* LP8555 */
|
|
backlight@2c {
|
|
compatible = "ti,lp8555";
|
|
reg = <0x2c>;
|
|
|
|
dev-ctrl = /bits/ 8 <0x00>;
|
|
pwm-period = <10000>;
|
|
|
|
/* 4V OV, 4 output LED0 string enabled */
|
|
rom_14h {
|
|
rom-addr = /bits/ 8 <0x14>;
|
|
rom-val = /bits/ 8 <0xcf>;
|
|
};
|
|
|
|
/* Heavy smoothing, 24ms ramp time step */
|
|
rom_15h {
|
|
rom-addr = /bits/ 8 <0x15>;
|
|
rom-val = /bits/ 8 <0xc7>;
|
|
};
|
|
|
|
/* 4 output LED1 string enabled */
|
|
rom_19h {
|
|
rom-addr = /bits/ 8 <0x19>;
|
|
rom-val = /bits/ 8 <0x0f>;
|
|
};
|
|
};
|
|
|
|
/* LP8556 */
|
|
backlight@2c {
|
|
compatible = "ti,lp8556";
|
|
reg = <0x2c>;
|
|
|
|
bl-name = "lcd-bl";
|
|
dev-ctrl = /bits/ 8 <0x85>;
|
|
init-brt = /bits/ 8 <0x10>;
|
|
};
|
|
|
|
/* LP8557 */
|
|
backlight@2c {
|
|
compatible = "ti,lp8557";
|
|
reg = <0x2c>;
|
|
power-supply = <&backlight_vdd>;
|
|
|
|
dev-ctrl = /bits/ 8 <0x41>;
|
|
init-brt = /bits/ 8 <0x0a>;
|
|
|
|
/* 4V OV, 4 output LED string enabled */
|
|
rom_14h {
|
|
rom-addr = /bits/ 8 <0x14>;
|
|
rom-val = /bits/ 8 <0xcf>;
|
|
};
|
|
};
|