forked from Minki/linux
e057044677
The Zoom R16/24 have a nonstandard playback format where each isochronous packet contains a length descriptor in the first four bytes. (Curiously, capture data does not contain this and requires no quirk.) The quirk involves adding the extra length descriptor whenever outgoing isochronous packets are generated, both in pcm.c (outgoing audio) and endpoint.c (silent data). In order to make the quirk as unintrusive as possible, for pcm.c:prepare_playback_urb(), the isochronous packet descriptors are initially set up in the same way no matter if the quirk is enabled or not. Once it is time to actually copy the data into the outgoing packet buffer (together with the added length descriptors) the isochronous descriptors are adjusted in order take the increased payload length into account. For endpoint.c:prepare_silent_urb() it makes more sense to modify the actual function, partly because the function is less complex to start with and partly because it is not as time-critical as prepare_playback_urb() (whose bulk is run with interrupts disabled), so the (minute) additional time spent in the non-quirk case is motivated by the simplicity of having a single function for all cases. The quirk is controlled by the new tx_length_quirk member in struct snd_usb_substream and struct snd_usb_audio, which is conveyed to pcm.c and endpoint.c from quirks.c in a similar manner to the txfr_quirk member in the same structs. In contrast to txfr_quirk however, the quirk is enabled directly in quirks.c:create_standard_audio_quirk() by checking the USB ID in that function. Another option would be to introduce a new QUIRK_AUDIO_ZOOM_INTERFACE or somesuch, which would have made the quirk very plain to see in the quirk table, but it was felt that the additional code needed to implement it this way would just make the implementation more complex with no real gain. Tested with a Zoom R16, both by doing capture and playback separately using arecord and aplay (8 channel capture and 2 channel playback, respectively), as well as capture and playback together using Ardour, as well as Audacity and Qtractor together with jackd. The R24 is reportedly compatible with the R16 when used as an audio interface. Both devices share the same USB ID and have the same number of inputs (8) and outputs (2). Therefore "R16/24" is mentioned throughout the patch. Regression tested using an Edirol UA-5 in both class compliant (16-bit) and "advanced" (24 bit, forces the use of quirks) modes. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Tested-by: Panu Matilainen <pmatilai@laiskiainen.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
741 lines
20 KiB
C
741 lines
20 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/audio.h>
|
|
#include <linux/usb/audio-v2.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/control.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "usbaudio.h"
|
|
#include "card.h"
|
|
#include "proc.h"
|
|
#include "quirks.h"
|
|
#include "endpoint.h"
|
|
#include "pcm.h"
|
|
#include "helper.h"
|
|
#include "format.h"
|
|
#include "clock.h"
|
|
#include "stream.h"
|
|
|
|
/*
|
|
* free a substream
|
|
*/
|
|
static void free_substream(struct snd_usb_substream *subs)
|
|
{
|
|
struct audioformat *fp, *n;
|
|
|
|
if (!subs->num_formats)
|
|
return; /* not initialized */
|
|
list_for_each_entry_safe(fp, n, &subs->fmt_list, list) {
|
|
kfree(fp->rate_table);
|
|
kfree(fp->chmap);
|
|
kfree(fp);
|
|
}
|
|
kfree(subs->rate_list.list);
|
|
}
|
|
|
|
|
|
/*
|
|
* free a usb stream instance
|
|
*/
|
|
static void snd_usb_audio_stream_free(struct snd_usb_stream *stream)
|
|
{
|
|
free_substream(&stream->substream[0]);
|
|
free_substream(&stream->substream[1]);
|
|
list_del(&stream->list);
|
|
kfree(stream);
|
|
}
|
|
|
|
static void snd_usb_audio_pcm_free(struct snd_pcm *pcm)
|
|
{
|
|
struct snd_usb_stream *stream = pcm->private_data;
|
|
if (stream) {
|
|
stream->pcm = NULL;
|
|
snd_usb_audio_stream_free(stream);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* initialize the substream instance.
|
|
*/
|
|
|
|
static void snd_usb_init_substream(struct snd_usb_stream *as,
|
|
int stream,
|
|
struct audioformat *fp)
|
|
{
|
|
struct snd_usb_substream *subs = &as->substream[stream];
|
|
|
|
INIT_LIST_HEAD(&subs->fmt_list);
|
|
spin_lock_init(&subs->lock);
|
|
|
|
subs->stream = as;
|
|
subs->direction = stream;
|
|
subs->dev = as->chip->dev;
|
|
subs->txfr_quirk = as->chip->txfr_quirk;
|
|
subs->tx_length_quirk = as->chip->tx_length_quirk;
|
|
subs->speed = snd_usb_get_speed(subs->dev);
|
|
subs->pkt_offset_adj = 0;
|
|
|
|
snd_usb_set_pcm_ops(as->pcm, stream);
|
|
|
|
list_add_tail(&fp->list, &subs->fmt_list);
|
|
subs->formats |= fp->formats;
|
|
subs->num_formats++;
|
|
subs->fmt_type = fp->fmt_type;
|
|
subs->ep_num = fp->endpoint;
|
|
if (fp->channels > subs->channels_max)
|
|
subs->channels_max = fp->channels;
|
|
}
|
|
|
|
/* kctl callbacks for usb-audio channel maps */
|
|
static int usb_chmap_ctl_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
|
|
struct snd_usb_substream *subs = info->private_data;
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = subs->channels_max;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = SNDRV_CHMAP_LAST;
|
|
return 0;
|
|
}
|
|
|
|
/* check whether a duplicated entry exists in the audiofmt list */
|
|
static bool have_dup_chmap(struct snd_usb_substream *subs,
|
|
struct audioformat *fp)
|
|
{
|
|
struct list_head *p;
|
|
|
|
for (p = fp->list.prev; p != &subs->fmt_list; p = p->prev) {
|
|
struct audioformat *prev;
|
|
prev = list_entry(p, struct audioformat, list);
|
|
if (prev->chmap &&
|
|
!memcmp(prev->chmap, fp->chmap, sizeof(*fp->chmap)))
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static int usb_chmap_ctl_tlv(struct snd_kcontrol *kcontrol, int op_flag,
|
|
unsigned int size, unsigned int __user *tlv)
|
|
{
|
|
struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
|
|
struct snd_usb_substream *subs = info->private_data;
|
|
struct audioformat *fp;
|
|
unsigned int __user *dst;
|
|
int count = 0;
|
|
|
|
if (size < 8)
|
|
return -ENOMEM;
|
|
if (put_user(SNDRV_CTL_TLVT_CONTAINER, tlv))
|
|
return -EFAULT;
|
|
size -= 8;
|
|
dst = tlv + 2;
|
|
list_for_each_entry(fp, &subs->fmt_list, list) {
|
|
int i, ch_bytes;
|
|
|
|
if (!fp->chmap)
|
|
continue;
|
|
if (have_dup_chmap(subs, fp))
|
|
continue;
|
|
/* copy the entry */
|
|
ch_bytes = fp->chmap->channels * 4;
|
|
if (size < 8 + ch_bytes)
|
|
return -ENOMEM;
|
|
if (put_user(SNDRV_CTL_TLVT_CHMAP_FIXED, dst) ||
|
|
put_user(ch_bytes, dst + 1))
|
|
return -EFAULT;
|
|
dst += 2;
|
|
for (i = 0; i < fp->chmap->channels; i++, dst++) {
|
|
if (put_user(fp->chmap->map[i], dst))
|
|
return -EFAULT;
|
|
}
|
|
|
|
count += 8 + ch_bytes;
|
|
size -= 8 + ch_bytes;
|
|
}
|
|
if (put_user(count, tlv + 1))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int usb_chmap_ctl_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
|
|
struct snd_usb_substream *subs = info->private_data;
|
|
struct snd_pcm_chmap_elem *chmap = NULL;
|
|
int i;
|
|
|
|
memset(ucontrol->value.integer.value, 0,
|
|
sizeof(ucontrol->value.integer.value));
|
|
if (subs->cur_audiofmt)
|
|
chmap = subs->cur_audiofmt->chmap;
|
|
if (chmap) {
|
|
for (i = 0; i < chmap->channels; i++)
|
|
ucontrol->value.integer.value[i] = chmap->map[i];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* create a chmap kctl assigned to the given USB substream */
|
|
static int add_chmap(struct snd_pcm *pcm, int stream,
|
|
struct snd_usb_substream *subs)
|
|
{
|
|
struct audioformat *fp;
|
|
struct snd_pcm_chmap *chmap;
|
|
struct snd_kcontrol *kctl;
|
|
int err;
|
|
|
|
list_for_each_entry(fp, &subs->fmt_list, list)
|
|
if (fp->chmap)
|
|
goto ok;
|
|
/* no chmap is found */
|
|
return 0;
|
|
|
|
ok:
|
|
err = snd_pcm_add_chmap_ctls(pcm, stream, NULL, 0, 0, &chmap);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* override handlers */
|
|
chmap->private_data = subs;
|
|
kctl = chmap->kctl;
|
|
kctl->info = usb_chmap_ctl_info;
|
|
kctl->get = usb_chmap_ctl_get;
|
|
kctl->tlv.c = usb_chmap_ctl_tlv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* convert from USB ChannelConfig bits to ALSA chmap element */
|
|
static struct snd_pcm_chmap_elem *convert_chmap(int channels, unsigned int bits,
|
|
int protocol)
|
|
{
|
|
static unsigned int uac1_maps[] = {
|
|
SNDRV_CHMAP_FL, /* left front */
|
|
SNDRV_CHMAP_FR, /* right front */
|
|
SNDRV_CHMAP_FC, /* center front */
|
|
SNDRV_CHMAP_LFE, /* LFE */
|
|
SNDRV_CHMAP_SL, /* left surround */
|
|
SNDRV_CHMAP_SR, /* right surround */
|
|
SNDRV_CHMAP_FLC, /* left of center */
|
|
SNDRV_CHMAP_FRC, /* right of center */
|
|
SNDRV_CHMAP_RC, /* surround */
|
|
SNDRV_CHMAP_SL, /* side left */
|
|
SNDRV_CHMAP_SR, /* side right */
|
|
SNDRV_CHMAP_TC, /* top */
|
|
0 /* terminator */
|
|
};
|
|
static unsigned int uac2_maps[] = {
|
|
SNDRV_CHMAP_FL, /* front left */
|
|
SNDRV_CHMAP_FR, /* front right */
|
|
SNDRV_CHMAP_FC, /* front center */
|
|
SNDRV_CHMAP_LFE, /* LFE */
|
|
SNDRV_CHMAP_RL, /* back left */
|
|
SNDRV_CHMAP_RR, /* back right */
|
|
SNDRV_CHMAP_FLC, /* front left of center */
|
|
SNDRV_CHMAP_FRC, /* front right of center */
|
|
SNDRV_CHMAP_RC, /* back center */
|
|
SNDRV_CHMAP_SL, /* side left */
|
|
SNDRV_CHMAP_SR, /* side right */
|
|
SNDRV_CHMAP_TC, /* top center */
|
|
SNDRV_CHMAP_TFL, /* top front left */
|
|
SNDRV_CHMAP_TFC, /* top front center */
|
|
SNDRV_CHMAP_TFR, /* top front right */
|
|
SNDRV_CHMAP_TRL, /* top back left */
|
|
SNDRV_CHMAP_TRC, /* top back center */
|
|
SNDRV_CHMAP_TRR, /* top back right */
|
|
SNDRV_CHMAP_TFLC, /* top front left of center */
|
|
SNDRV_CHMAP_TFRC, /* top front right of center */
|
|
SNDRV_CHMAP_LLFE, /* left LFE */
|
|
SNDRV_CHMAP_RLFE, /* right LFE */
|
|
SNDRV_CHMAP_TSL, /* top side left */
|
|
SNDRV_CHMAP_TSR, /* top side right */
|
|
SNDRV_CHMAP_BC, /* bottom center */
|
|
SNDRV_CHMAP_RLC, /* back left of center */
|
|
SNDRV_CHMAP_RRC, /* back right of center */
|
|
0 /* terminator */
|
|
};
|
|
struct snd_pcm_chmap_elem *chmap;
|
|
const unsigned int *maps;
|
|
int c;
|
|
|
|
if (channels > ARRAY_SIZE(chmap->map))
|
|
return NULL;
|
|
|
|
chmap = kzalloc(sizeof(*chmap), GFP_KERNEL);
|
|
if (!chmap)
|
|
return NULL;
|
|
|
|
maps = protocol == UAC_VERSION_2 ? uac2_maps : uac1_maps;
|
|
chmap->channels = channels;
|
|
c = 0;
|
|
|
|
if (bits) {
|
|
for (; bits && *maps; maps++, bits >>= 1)
|
|
if (bits & 1)
|
|
chmap->map[c++] = *maps;
|
|
} else {
|
|
/* If we're missing wChannelConfig, then guess something
|
|
to make sure the channel map is not skipped entirely */
|
|
if (channels == 1)
|
|
chmap->map[c++] = SNDRV_CHMAP_MONO;
|
|
else
|
|
for (; c < channels && *maps; maps++)
|
|
chmap->map[c++] = *maps;
|
|
}
|
|
|
|
for (; c < channels; c++)
|
|
chmap->map[c] = SNDRV_CHMAP_UNKNOWN;
|
|
|
|
return chmap;
|
|
}
|
|
|
|
/*
|
|
* add this endpoint to the chip instance.
|
|
* if a stream with the same endpoint already exists, append to it.
|
|
* if not, create a new pcm stream.
|
|
*/
|
|
int snd_usb_add_audio_stream(struct snd_usb_audio *chip,
|
|
int stream,
|
|
struct audioformat *fp)
|
|
{
|
|
struct snd_usb_stream *as;
|
|
struct snd_usb_substream *subs;
|
|
struct snd_pcm *pcm;
|
|
int err;
|
|
|
|
list_for_each_entry(as, &chip->pcm_list, list) {
|
|
if (as->fmt_type != fp->fmt_type)
|
|
continue;
|
|
subs = &as->substream[stream];
|
|
if (subs->ep_num == fp->endpoint) {
|
|
list_add_tail(&fp->list, &subs->fmt_list);
|
|
subs->num_formats++;
|
|
subs->formats |= fp->formats;
|
|
return 0;
|
|
}
|
|
}
|
|
/* look for an empty stream */
|
|
list_for_each_entry(as, &chip->pcm_list, list) {
|
|
if (as->fmt_type != fp->fmt_type)
|
|
continue;
|
|
subs = &as->substream[stream];
|
|
if (subs->ep_num)
|
|
continue;
|
|
err = snd_pcm_new_stream(as->pcm, stream, 1);
|
|
if (err < 0)
|
|
return err;
|
|
snd_usb_init_substream(as, stream, fp);
|
|
return add_chmap(as->pcm, stream, subs);
|
|
}
|
|
|
|
/* create a new pcm */
|
|
as = kzalloc(sizeof(*as), GFP_KERNEL);
|
|
if (!as)
|
|
return -ENOMEM;
|
|
as->pcm_index = chip->pcm_devs;
|
|
as->chip = chip;
|
|
as->fmt_type = fp->fmt_type;
|
|
err = snd_pcm_new(chip->card, "USB Audio", chip->pcm_devs,
|
|
stream == SNDRV_PCM_STREAM_PLAYBACK ? 1 : 0,
|
|
stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1,
|
|
&pcm);
|
|
if (err < 0) {
|
|
kfree(as);
|
|
return err;
|
|
}
|
|
as->pcm = pcm;
|
|
pcm->private_data = as;
|
|
pcm->private_free = snd_usb_audio_pcm_free;
|
|
pcm->info_flags = 0;
|
|
if (chip->pcm_devs > 0)
|
|
sprintf(pcm->name, "USB Audio #%d", chip->pcm_devs);
|
|
else
|
|
strcpy(pcm->name, "USB Audio");
|
|
|
|
snd_usb_init_substream(as, stream, fp);
|
|
|
|
/*
|
|
* Keep using head insertion for M-Audio Audiophile USB (tm) which has a
|
|
* fix to swap capture stream order in conf/cards/USB-audio.conf
|
|
*/
|
|
if (chip->usb_id == USB_ID(0x0763, 0x2003))
|
|
list_add(&as->list, &chip->pcm_list);
|
|
else
|
|
list_add_tail(&as->list, &chip->pcm_list);
|
|
|
|
chip->pcm_devs++;
|
|
|
|
snd_usb_proc_pcm_format_add(as);
|
|
|
|
return add_chmap(pcm, stream, &as->substream[stream]);
|
|
}
|
|
|
|
static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
|
|
struct usb_host_interface *alts,
|
|
int protocol, int iface_no)
|
|
{
|
|
/* parsed with a v1 header here. that's ok as we only look at the
|
|
* header first which is the same for both versions */
|
|
struct uac_iso_endpoint_descriptor *csep;
|
|
struct usb_interface_descriptor *altsd = get_iface_desc(alts);
|
|
int attributes = 0;
|
|
|
|
csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
|
|
|
|
/* Creamware Noah has this descriptor after the 2nd endpoint */
|
|
if (!csep && altsd->bNumEndpoints >= 2)
|
|
csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
|
|
|
|
/*
|
|
* If we can't locate the USB_DT_CS_ENDPOINT descriptor in the extra
|
|
* bytes after the first endpoint, go search the entire interface.
|
|
* Some devices have it directly *before* the standard endpoint.
|
|
*/
|
|
if (!csep)
|
|
csep = snd_usb_find_desc(alts->extra, alts->extralen, NULL, USB_DT_CS_ENDPOINT);
|
|
|
|
if (!csep || csep->bLength < 7 ||
|
|
csep->bDescriptorSubtype != UAC_EP_GENERAL) {
|
|
usb_audio_warn(chip,
|
|
"%u:%d : no or invalid class specific endpoint descriptor\n",
|
|
iface_no, altsd->bAlternateSetting);
|
|
return 0;
|
|
}
|
|
|
|
if (protocol == UAC_VERSION_1) {
|
|
attributes = csep->bmAttributes;
|
|
} else {
|
|
struct uac2_iso_endpoint_descriptor *csep2 =
|
|
(struct uac2_iso_endpoint_descriptor *) csep;
|
|
|
|
attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX;
|
|
|
|
/* emulate the endpoint attributes of a v1 device */
|
|
if (csep2->bmControls & UAC2_CONTROL_PITCH)
|
|
attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL;
|
|
}
|
|
|
|
return attributes;
|
|
}
|
|
|
|
/* find an input terminal descriptor (either UAC1 or UAC2) with the given
|
|
* terminal id
|
|
*/
|
|
static void *
|
|
snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
|
|
int terminal_id)
|
|
{
|
|
struct uac2_input_terminal_descriptor *term = NULL;
|
|
|
|
while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
|
|
ctrl_iface->extralen,
|
|
term, UAC_INPUT_TERMINAL))) {
|
|
if (term->bTerminalID == terminal_id)
|
|
return term;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct uac2_output_terminal_descriptor *
|
|
snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
|
|
int terminal_id)
|
|
{
|
|
struct uac2_output_terminal_descriptor *term = NULL;
|
|
|
|
while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
|
|
ctrl_iface->extralen,
|
|
term, UAC_OUTPUT_TERMINAL))) {
|
|
if (term->bTerminalID == terminal_id)
|
|
return term;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
|
|
{
|
|
struct usb_device *dev;
|
|
struct usb_interface *iface;
|
|
struct usb_host_interface *alts;
|
|
struct usb_interface_descriptor *altsd;
|
|
int i, altno, err, stream;
|
|
unsigned int format = 0, num_channels = 0;
|
|
struct audioformat *fp = NULL;
|
|
int num, protocol, clock = 0;
|
|
struct uac_format_type_i_continuous_descriptor *fmt;
|
|
unsigned int chconfig;
|
|
|
|
dev = chip->dev;
|
|
|
|
/* parse the interface's altsettings */
|
|
iface = usb_ifnum_to_if(dev, iface_no);
|
|
|
|
num = iface->num_altsetting;
|
|
|
|
/*
|
|
* Dallas DS4201 workaround: It presents 5 altsettings, but the last
|
|
* one misses syncpipe, and does not produce any sound.
|
|
*/
|
|
if (chip->usb_id == USB_ID(0x04fa, 0x4201))
|
|
num = 4;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
alts = &iface->altsetting[i];
|
|
altsd = get_iface_desc(alts);
|
|
protocol = altsd->bInterfaceProtocol;
|
|
/* skip invalid one */
|
|
if (((altsd->bInterfaceClass != USB_CLASS_AUDIO ||
|
|
(altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING &&
|
|
altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC)) &&
|
|
altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
|
|
altsd->bNumEndpoints < 1 ||
|
|
le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0)
|
|
continue;
|
|
/* must be isochronous */
|
|
if ((get_endpoint(alts, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
|
|
USB_ENDPOINT_XFER_ISOC)
|
|
continue;
|
|
/* check direction */
|
|
stream = (get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN) ?
|
|
SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
|
|
altno = altsd->bAlternateSetting;
|
|
|
|
if (snd_usb_apply_interface_quirk(chip, iface_no, altno))
|
|
continue;
|
|
|
|
/*
|
|
* Roland audio streaming interfaces are marked with protocols
|
|
* 0/1/2, but are UAC 1 compatible.
|
|
*/
|
|
if (USB_ID_VENDOR(chip->usb_id) == 0x0582 &&
|
|
altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC &&
|
|
protocol <= 2)
|
|
protocol = UAC_VERSION_1;
|
|
|
|
chconfig = 0;
|
|
/* get audio formats */
|
|
switch (protocol) {
|
|
default:
|
|
dev_dbg(&dev->dev, "%u:%d: unknown interface protocol %#02x, assuming v1\n",
|
|
iface_no, altno, protocol);
|
|
protocol = UAC_VERSION_1;
|
|
/* fall through */
|
|
|
|
case UAC_VERSION_1: {
|
|
struct uac1_as_header_descriptor *as =
|
|
snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
|
|
struct uac_input_terminal_descriptor *iterm;
|
|
|
|
if (!as) {
|
|
dev_err(&dev->dev,
|
|
"%u:%d : UAC_AS_GENERAL descriptor not found\n",
|
|
iface_no, altno);
|
|
continue;
|
|
}
|
|
|
|
if (as->bLength < sizeof(*as)) {
|
|
dev_err(&dev->dev,
|
|
"%u:%d : invalid UAC_AS_GENERAL desc\n",
|
|
iface_no, altno);
|
|
continue;
|
|
}
|
|
|
|
format = le16_to_cpu(as->wFormatTag); /* remember the format value */
|
|
|
|
iterm = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
|
|
as->bTerminalLink);
|
|
if (iterm) {
|
|
num_channels = iterm->bNrChannels;
|
|
chconfig = le16_to_cpu(iterm->wChannelConfig);
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
case UAC_VERSION_2: {
|
|
struct uac2_input_terminal_descriptor *input_term;
|
|
struct uac2_output_terminal_descriptor *output_term;
|
|
struct uac2_as_header_descriptor *as =
|
|
snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
|
|
|
|
if (!as) {
|
|
dev_err(&dev->dev,
|
|
"%u:%d : UAC_AS_GENERAL descriptor not found\n",
|
|
iface_no, altno);
|
|
continue;
|
|
}
|
|
|
|
if (as->bLength < sizeof(*as)) {
|
|
dev_err(&dev->dev,
|
|
"%u:%d : invalid UAC_AS_GENERAL desc\n",
|
|
iface_no, altno);
|
|
continue;
|
|
}
|
|
|
|
num_channels = as->bNrChannels;
|
|
format = le32_to_cpu(as->bmFormats);
|
|
chconfig = le32_to_cpu(as->bmChannelConfig);
|
|
|
|
/* lookup the terminal associated to this interface
|
|
* to extract the clock */
|
|
input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
|
|
as->bTerminalLink);
|
|
if (input_term) {
|
|
clock = input_term->bCSourceID;
|
|
if (!chconfig && (num_channels == input_term->bNrChannels))
|
|
chconfig = le32_to_cpu(input_term->bmChannelConfig);
|
|
break;
|
|
}
|
|
|
|
output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
|
|
as->bTerminalLink);
|
|
if (output_term) {
|
|
clock = output_term->bCSourceID;
|
|
break;
|
|
}
|
|
|
|
dev_err(&dev->dev,
|
|
"%u:%d : bogus bTerminalLink %d\n",
|
|
iface_no, altno, as->bTerminalLink);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* get format type */
|
|
fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
|
|
if (!fmt) {
|
|
dev_err(&dev->dev,
|
|
"%u:%d : no UAC_FORMAT_TYPE desc\n",
|
|
iface_no, altno);
|
|
continue;
|
|
}
|
|
if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
|
|
((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) {
|
|
dev_err(&dev->dev,
|
|
"%u:%d : invalid UAC_FORMAT_TYPE desc\n",
|
|
iface_no, altno);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Blue Microphones workaround: The last altsetting is identical
|
|
* with the previous one, except for a larger packet size, but
|
|
* is actually a mislabeled two-channel setting; ignore it.
|
|
*/
|
|
if (fmt->bNrChannels == 1 &&
|
|
fmt->bSubframeSize == 2 &&
|
|
altno == 2 && num == 3 &&
|
|
fp && fp->altsetting == 1 && fp->channels == 1 &&
|
|
fp->formats == SNDRV_PCM_FMTBIT_S16_LE &&
|
|
protocol == UAC_VERSION_1 &&
|
|
le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
|
|
fp->maxpacksize * 2)
|
|
continue;
|
|
|
|
fp = kzalloc(sizeof(*fp), GFP_KERNEL);
|
|
if (! fp) {
|
|
dev_err(&dev->dev, "cannot malloc\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
fp->iface = iface_no;
|
|
fp->altsetting = altno;
|
|
fp->altset_idx = i;
|
|
fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
|
|
fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
|
|
fp->datainterval = snd_usb_parse_datainterval(chip, alts);
|
|
fp->protocol = protocol;
|
|
fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
|
|
fp->channels = num_channels;
|
|
if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
|
|
fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
|
|
* (fp->maxpacksize & 0x7ff);
|
|
fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
|
|
fp->clock = clock;
|
|
|
|
/* some quirks for attributes here */
|
|
|
|
switch (chip->usb_id) {
|
|
case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */
|
|
/* Optoplay sets the sample rate attribute although
|
|
* it seems not supporting it in fact.
|
|
*/
|
|
fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
|
|
break;
|
|
case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
|
|
case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
|
|
/* doesn't set the sample rate attribute, but supports it */
|
|
fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
|
|
break;
|
|
case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
|
|
case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
|
|
case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
|
|
case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
|
|
an older model 77d:223) */
|
|
/*
|
|
* plantronics headset and Griffin iMic have set adaptive-in
|
|
* although it's really not...
|
|
*/
|
|
fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
|
|
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
|
|
else
|
|
fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
|
|
break;
|
|
}
|
|
|
|
/* ok, let's parse further... */
|
|
if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream) < 0) {
|
|
kfree(fp->rate_table);
|
|
kfree(fp);
|
|
fp = NULL;
|
|
continue;
|
|
}
|
|
|
|
/* Create chmap */
|
|
if (fp->channels != num_channels)
|
|
chconfig = 0;
|
|
fp->chmap = convert_chmap(fp->channels, chconfig, protocol);
|
|
|
|
dev_dbg(&dev->dev, "%u:%d: add audio endpoint %#x\n", iface_no, altno, fp->endpoint);
|
|
err = snd_usb_add_audio_stream(chip, stream, fp);
|
|
if (err < 0) {
|
|
kfree(fp->rate_table);
|
|
kfree(fp->chmap);
|
|
kfree(fp);
|
|
return err;
|
|
}
|
|
/* try to set the interface... */
|
|
usb_set_interface(chip->dev, iface_no, altno);
|
|
snd_usb_init_pitch(chip, iface_no, alts, fp);
|
|
snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max);
|
|
}
|
|
return 0;
|
|
}
|
|
|